|
11-23-2023, 03:08 PM
|
#25 |
|
Senior Member
 Join Date: Dec 1999
Location: Southern California
Posts: 2,723
|
Re: 1350 Drive Shaft
They will most likely use a CV like this https://www.dennysdriveshaft.com/p17..._cv_head_.html
Says 32 degrees but in reality maxes out around 30. I clearanced mine to get about 35 degrees as I max out at 32 degrees at full droop. Some just freak out about higher ujoint operating angles. In real world use operating angles of 10 degrees can live a long trouble free life. With your 17 degree angle each of the ujoints in the cv are only seeing 8.5 degrees.
__________________
Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746 Last edited by Richard; 11-23-2023 at 03:14 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode