parting out 78 GMC C/30 dually - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76HighSierra · 08-10-2004, 03:01 AM

Now mind you, I know there's no way that you can test it's accuracy, without the aid of a calibrated tach. I'm not asking that. :p Merely that it "seems" accurate. My present factory tach jumps, bounces and reads GROSSLY inaccurately. It never goes above 1500rpm and at an 800rpm idle it reads about 500rpm. basically, if it runs smooth and "seems" accurate, that's good enough for me. Do you do paypal?

Chevyguy111786 · 08-10-2004, 10:51 AM

have you come up with shipping on those seat belts?

72 CustomCamper · 08-11-2004, 02:18 AM

Hey Marc, I am not set up for paypal.

Chevyguy111786, I haven't got them out yet. Had a problem with the torx head bolts, so I'm going to drill them out tomorrow...

Chuck

ponjohn · 08-31-2004, 08:33 PM

sent you a PM on the mirrors.

john

67ChevyC10Stepside · 08-31-2004, 10:22 PM

if he dont want tach i do.

beaterC10 · 09-01-2004, 08:41 AM

What shape are the headlight doors and the transmission tunnel cover in?

72 CustomCamper · 09-01-2004, 02:32 PM

beaterC10, the headlight doors were so pitted I didn't see any use in saveing them. The tunnel is for a 4 spd and unless I find the right one I might have to use it in my 72 when I put the 78 4spd in it...

Chuck

ponjohn · 09-03-2004, 03:42 PM

72customcamper- please get back to me with a cost on the mirrors.-john

I'll send a PM too

72 CustomCamper · 09-03-2004, 06:18 PM

Hey John sent PM back at ya...

Chuck

Brimow525 · 09-18-2004, 10:35 PM

Do you still have the truck? How much for both rear springs? How much for hydro boost system?

08-10-2004, 03:01 AM	#26
76HighSierra DAMN, I love Big Blocks! Join Date: Aug 2003 Location: New Mexico, USA Posts: 619	Now mind you, I know there's no way that you can test it's accuracy, without the aid of a calibrated tach. I'm not asking that. :p Merely that it "seems" accurate. My present factory tach jumps, bounces and reads GROSSLY inaccurately. It never goes above 1500rpm and at an 800rpm idle it reads about 500rpm. basically, if it runs smooth and "seems" accurate, that's good enough for me. Do you do paypal? __________________ Marc Bona Hobbs, New Mexico 1976 1/2 ton GMC High Sierra. 454 c.i.d./ TH400. *Soon to get a mild warming over.* 3.40 rear.

08-11-2004, 02:18 AM	#28
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	Hey Marc, I am not set up for paypal. Chevyguy111786, I haven't got them out yet. Had a problem with the torx head bolts, so I'm going to drill them out tomorrow... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

08-31-2004, 10:22 PM	#30
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	if he dont want tach i do. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

09-01-2004, 02:32 PM	#32
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	beaterC10, the headlight doors were so pitted I didn't see any use in saveing them. The tunnel is for a 4 spd and unless I find the right one I might have to use it in my 72 when I put the 78 4spd in it... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

09-03-2004, 06:18 PM	#34
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	Hey John sent PM back at ya... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

08-10-2004, 10:51 AM	#27
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	have you come up with shipping on those seat belts?

08-31-2004, 08:33 PM	#29
ponjohn Registered User Join Date: May 2002 Location: woodbridge, ct. usa Posts: 145	sent you a PM on the mirrors. john

09-01-2004, 08:41 AM	#31
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	What shape are the headlight doors and the transmission tunnel cover in?

09-03-2004, 03:42 PM	#33
ponjohn Registered User Join Date: May 2002 Location: woodbridge, ct. usa Posts: 145	72customcamper- please get back to me with a cost on the mirrors.-john I'll send a PM too

09-18-2004, 10:35 PM	#35
Brimow525 Registered User Join Date: Feb 2004 Location: Wrenchin' or Working in De., take your pick Posts: 51	Do you still have the truck? How much for both rear springs? How much for hydro boost system? __________________ Cuttin' Grass and Kickin' A** , and We're Running Out of Grass to Cut!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.