wanted chassis or whole truck.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 07-08-2004, 09:05 PM

I need a chassis for my 50 model 1/2 ton truck. I will take anything from a bare frame all the way up to a parts truck.

I'm in DFW Texas, but will travel for the right deal. I have a diesel truck and trailer, so I'm not scared to road trip it.

PS..there was a post on here late last year by a Texas guy who had a truck that was crushed by a pole or tree or something. Guy was in Ft Worth Texas area. I can't find the post because of the board change. If you are him, or know who it was, please respond. That truck would have been perfect for what I need.

BEAVIS · 07-17-2004, 06:41 PM

Hey there fellow Texan, I relocated from Ft Worth two years ago to Memphis. I saw an ad yesterday that is here locally you may be interested in. It reads 1950 5 window project truck with two parts trucks all for $1000, I want the 5 window but have no space for the parts trucks, and I am a couple of hundred shy of a grand right now. So if you are interested you can call this guy at 901-867-7920. Maybe we could buy them and you could get the parts trucks. Let me know if you are interested. Jeremy.

72map · 07-30-2004, 05:17 PM

tx firefighter,
what all are you needing? i have a few frames,chassies, and even maybe a cab. how much are you willing to spend? pm me. i am in memphis.

Tx Firefighter · 07-30-2004, 05:21 PM

I'd like a frame with at least rear springs and front end too. I'll be putting a later rear end into it, so I don't really need a stock rear end. I do want front axle and springs though.

Frankly, it would need to be pretty cheap to offset the drive with trailer in tow.

If you have what I'm looking for, let me know, and how much $ you're looking to get out of it.

72map · 07-30-2004, 06:40 PM

the parts are my father's. he was talking about $400 for a rolling chass. it is i belive a 51 or a 50. it has the rear leafs,stockdif and also the front. he also has a 55 frame. can not remember if it has the rear leafs are not but i know it has the front on it.
do not know how firm he is. if interested let me know and i will talk to him.

fleetside72 · 07-30-2004, 08:42 PM

I have a 49 GMC up here in Wis,,good frame,runs too,but it needs a body,has just a cab,,$300,thats what i got into it...David

Marty Gable · 08-01-2004, 08:48 PM

you guys have some pretty good deals going here... but think mine might top it if your interested... will have a complete chassis minus the engine ... its yours if you want it were in the process of striping the sheet metal off the chassis as we speak and replacing it with an S-10 chassis.... im in Colorado....

Marty

Tx Firefighter · 08-01-2004, 10:06 PM

Quote:

Originally Posted by Marty Gable

you guys have some pretty good deals going here... but think mine might top it if your interested... will have a complete chassis minus the engine ... its yours if you want it were in the process of striping the sheet metal off the chassis as we speak and replacing it with an S-10 chassis.... im in Colorado....

Marty

Marty!

I spent last weekend securing my 50 onto a S-10 chassis. It's a great swap. If you need motivation, PM me and I can steer you at some rightous S-10 chassied 48-54 trucks.

indianmotocycle2001 · 09-21-2004, 03:41 AM

Does anyone wanta swap a rolling s-10 chassis for a rolling 49 frame with running motor??

bstack · 09-25-2004, 03:11 AM

Was just reading the post. What is involed in this
48-54 cab onto an S-10 chassis thing??

07-08-2004, 09:05 PM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	wanted chassis or whole truck.... I need a chassis for my 50 model 1/2 ton truck. I will take anything from a bare frame all the way up to a parts truck. I'm in DFW Texas, but will travel for the right deal. I have a diesel truck and trailer, so I'm not scared to road trip it. PS..there was a post on here late last year by a Texas guy who had a truck that was crushed by a pole or tree or something. Guy was in Ft Worth Texas area. I can't find the post because of the board change. If you are him, or know who it was, please respond. That truck would have been perfect for what I need. __________________ I'm on the Instagram- @Gearhead_Kevin

07-30-2004, 05:17 PM	#3
72map Registered User Join Date: Jul 2004 Posts: 9	maybe have what you need tx firefighter, what all are you needing? i have a few frames,chassies, and even maybe a cab. how much are you willing to spend? pm me. i am in memphis. __________________ 65 step side 4x4 72 k5 blazer

07-30-2004, 05:21 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I'd like a frame with at least rear springs and front end too. I'll be putting a later rear end into it, so I don't really need a stock rear end. I do want front axle and springs though. Frankly, it would need to be pretty cheap to offset the drive with trailer in tow. If you have what I'm looking for, let me know, and how much $ you're looking to get out of it. __________________ I'm on the Instagram- @Gearhead_Kevin

07-30-2004, 06:40 PM	#5
72map Registered User Join Date: Jul 2004 Posts: 9	the parts are my father's. he was talking about $400 for a rolling chass. it is i belive a 51 or a 50. it has the rear leafs,stockdif and also the front. he also has a 55 frame. can not remember if it has the rear leafs are not but i know it has the front on it. do not know how firm he is. if interested let me know and i will talk to him. __________________ 65 step side 4x4 72 k5 blazer

07-30-2004, 08:42 PM	#6
fleetside72 Registered User Join Date: Sep 2002 Location: Cadott Wis,54727 Posts: 193	wanted chassis or whole truck I have a 49 GMC up here in Wis,,good frame,runs too,but it needs a body,has just a cab,,$300,thats what i got into it...David

07-17-2004, 06:41 PM	#2
BEAVIS Registered User Join Date: Jun 2001 Location: Paris,Texas Posts: 35	Hey there fellow Texan, I relocated from Ft Worth two years ago to Memphis. I saw an ad yesterday that is here locally you may be interested in. It reads 1950 5 window project truck with two parts trucks all for $1000, I want the 5 window but have no space for the parts trucks, and I am a couple of hundred shy of a grand right now. So if you are interested you can call this guy at 901-867-7920. Maybe we could buy them and you could get the parts trucks. Let me know if you are interested. Jeremy.

08-01-2004, 08:48 PM	#7
Marty Gable Still working on the COE Join Date: Sep 2003 Location: Loveland, Colorado Posts: 71	you guys have some pretty good deals going here... but think mine might top it if your interested... will have a complete chassis minus the engine ... its yours if you want it were in the process of striping the sheet metal off the chassis as we speak and replacing it with an S-10 chassis.... im in Colorado.... Marty

09-21-2004, 03:41 AM	#9
indianmotocycle2001 Registered User Join Date: Sep 2004 Posts: 80	Does anyone wanta swap a rolling s-10 chassis for a rolling 49 frame with running motor??

09-25-2004, 03:11 AM	#10
bstack Registered User Join Date: Dec 2000 Location: cambridge,ohio Posts: 135	Was just reading the post. What is involed in this 48-54 cab onto an S-10 chassis thing?? __________________ 70-Olds 442 66-Impala 4-dr. 67-K-10 87 Chev. 1/2 Ton 4x4 Swb



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.