52 Project - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nuke1 · 04-26-2009, 10:23 AM

truck looks really amazing, sure is coming along, and your faux 572 valve covers give me an idea. hhmmmmmmm

pgf545 · 04-26-2009, 08:48 PM

Quote:

Originally Posted by IvelDesigns

Is that a universal ididit column? and what length is it?

I measured the column today and it is 32" overall length and 23 1/2 from the end to the flared out part. Dad said that he ordered a kit from Ididit and all he told them was that it was a 52 Chevy truck and this is what the sent. The box even said 47-52 chevy truck. Hope this helps.

Quote:

Originally Posted by 4DSEVEN

Bernie can you tell me what the length of your steering column bracket is if you recall?

Thanks.

Mark

The column drop is 2 1/2 inches to the center. We are still trying to figure out the u joints and shafts....Looks like I am going to be doing a little more welding and cutting on the frame to make every thing clear...lol. Well not everything is cut and dry. I kinda figured that was going to be a challenge but the more I look at it the more I think I am going to need a little more clearance. But im not scared.

Bernie

pgf545 · 04-26-2009, 08:50 PM

Quote:

Originally Posted by nuke1

truck looks really amazing, sure is coming along, and your faux 572 valve covers give me an idea. hhmmmmmmm

Thanks, Yeah the valve covers really have been messing with people....but the motor kinda looks like a 572 with the aluminum heads.....

Bernie

Kabwe · 04-29-2009, 07:41 PM

Looking really good Bernie, keep up the good work.

pgf545 · 04-30-2009, 09:55 AM

Quote:

Originally Posted by Kabwe

Looking really good Bernie, keep up the good work.

Thanks Kabwe, I am in kinda lul right now. Last weekend a trip to get one kids college stuff taken care of and this weekend a trip to pick the other kid up from college....dang I can't wait until these boys get out of school...then I will have all sorts of money to finish my projects...lol.

Bernie

silver52 · 05-17-2009, 12:43 PM

Quote:

Originally Posted by pgf545

Hey Guys I actually got something done today...lol. Check out this brake pedal/booster mount that I got in today. I still need to build some gussets and finish welding it in but at least I got something done today.

Also there is a picture of one of the seats that we are going to use and a picture of the battery box from Brothers. The seats will probably be cut down but we still have some time to decide on that. Enjoy.

Bernie

I have a 1952 Chevy pick up that I am redoing. I have the break booster and I would like to know where you got your break booster from and did it come with all the brackets? Thank you for your time Bob

BIG CHEVY 3600 · 05-17-2009, 04:00 PM

Got mine from CCP

BIG CHEVY 3600 · 05-17-2009, 04:10 PM

I have quit using Webshots and gone to Photobucket. I got tired of all the crap Webshots hands out.

pgf545 · 05-17-2009, 06:37 PM

Worked on the steering linkage today and figured out that I have lots more work to do before I am happy with it...lol. Actually I need to get another ujoint that dad is going to order this week. I think that the double joint will work....I hope. Once I get that figured out then I can install the support bearing. Everything I tried I was running into something...this is as close as I got but the center joint is in a bind. Here are a couple of pictures.

pgf545 · 05-17-2009, 06:41 PM

Also mystery box arrived this week.....

Daniel U · 05-17-2009, 06:53 PM

Nice!

BIG CHEVY 3600 · 05-17-2009, 10:38 PM

You are looking good. I still have to install my steer col.

CAL 58 GMC · 05-18-2009, 02:07 AM

Hey Bernie, maybe a tranny in that TCI box?

pgf545 · 05-18-2009, 07:10 AM

Quote:

Originally Posted by Daniel U

Nice!

Thanks Daniel, how is your going?

Quote:

Originally Posted by BIG CHEVY 3600

You are looking good. I still have to install my steer col.

Yeah the steering stuff was eating my lunch yesterday but I will get it.

Quote:

Originally Posted by CAL 58 GMC

Hey Bernie, maybe a tranny in that TCI box?

Yep...a 700R4...complete with converter and all the goodies. I need to rework the tranny mount a little but will probably install it in the next weekend or so.

Bernie

bensimmons_05 · 05-18-2009, 08:46 AM

ohhhhhh new TCI tranny! I wanna see that thing. You have been busy ordering!

pgf545 · 05-25-2009, 10:34 PM

Well I finally have steering.....YAAAAHOOOOO!!!!! I got all the u-joints and shafts done and actually lifted it up and ran it lock to lock a few times. I still have the support bearing brackets clamped and will weld in once we take the motor out. I am going to pull the motor so I can install the new transmission. So once we do that I will weld the brackets. Also there is a few more things I need to weld on. He is a few pictures.

Bernie

Kabwe · 05-25-2009, 11:11 PM

Quote:

Originally Posted by pgf545

Well I finally have steering.....YAAAAHOOOOO!!!!! I got all the u-joints and shafts done and actually lifted it up and ran it lock to lock a few times. I still have the support bearing brackets clamped and will weld in once we take the motor out. I am going to pull the motor so I can install the new transmission. So once we do that I will weld the brackets. Also there is a few more things I need to weld on. He is a few pictures.

Bernie

Hey Bernie,

Nice work on the steering. You can't go wrong with the 700r4, I have one in the garage I'm going to rebuild when I find the time. Once again looking really good man, keep up the good work.

IvelDesigns · 05-26-2009, 12:31 AM

when i did my steering, i considered using one of those drop units that i've seen in the Summit and Speedway catalogs, but wasn't sure how i'd support it. In the end i ended up running mine much like yours. I did have a bit more room though since my engine is mounted what appears to be a bit higher than yours.

Things are lookin' really good here. before you know it, you'll be out driving it

pgf545 · 05-26-2009, 03:58 PM

Quote:

Originally Posted by IvelDesigns

when i did my steering, i considered using one of those drop units that i've seen in the Summit and Speedway catalogs, but wasn't sure how i'd support it. In the end i ended up running mine much like yours. I did have a bit more room though since my engine is mounted what appears to be a bit higher than yours.

Things are lookin' really good here. before you know it, you'll be out driving it

Hey Thanks, I actually feel like I got to drive it cause the steering works now

.

I was just checking out your build thread. You have been busy. I only get a few hours a week to mess with this one so it is going to take a while. Take car and good luck with your build.

Bernie

IvelDesigns · 05-26-2009, 09:56 PM

Quote:

Originally Posted by pgf545

I was just checking out your build thread. You have been busy. I only get a few hours a week to mess with this one so it is going to take a while. Take car and good luck with your build.

Bernie

thanks. it was nice driving it this weekend, but i think my head is still rattling from it (open headers).

CAL 58 GMC · 05-26-2009, 10:05 PM

Nice job Bernie!!!

pgf545 · 06-02-2009, 08:24 PM

Got a little out with the old in with the new this past weekend. Pulled the motor and tranny out and got the new 700R4 mounted to the motor. I need to get some help to move the cab so that I can rework the transmission cross member. I also welded in the brackets for the steering linkage. I won't be able to work on it this weekend because my youngest is graduating from High School...YaaaaHoooo!!!! Hopesully next weekend I can get that stuff done and start the body work. I think most of the fitting is done and should be coming together now...I hope. Here are a couple of pictures that I took this weekend.

Bernie

pgf545 · 07-03-2009, 11:06 PM

Ok not a lot going on exciting. I have been doing some detail work. I needed to make some clearance for the headers and the steering linkage around the rack. The u-joint was going to rub so I notched it and filled it in with a piece of tubing. Other than that I haven't been doing to much. Been really busy with my youngest son and getting him ready to start college in the fall. My dad is going to paint these reworked areas this week so maybe I can get the motor in its final resting spot and start with the brake, fuel and power steering lines. Here are a couple of pictures of what I have been up to.

Bernie

4DSEVEN · 07-04-2009, 12:12 PM

Bernie can you tell me what thickness of sheet metal you used? (assuming that is how it is bought?) I have some floor patching and not sure what to ask for at Metal Mart.

pgf545 · 07-04-2009, 12:18 PM

Quote:

Originally Posted by 4DSEVEN

Bernie can you tell me what thickness of sheet metal you used? (assuming that is how it is bought?) I have some floor patching and not sure what to ask for at Metal Mart.

Hey on the frame I think it was 10ga but if you are repairing the floor I think something thinner like 16 or 20 ga would be enough. I think 16 is .059 thick and I can't remember how thick the 20 is. Good luck.

Bernie

04-26-2009, 10:23 AM	#326
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: 52 Project truck looks really amazing, sure is coming along, and your faux 572 valve covers give me an idea. hhmmmmmmm __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

04-29-2009, 07:41 PM	#329
Kabwe Certified Car Nut Join Date: Jan 2005 Location: Inglewood, California Posts: 3,118	Re: 52 Project Looking really good Bernie, keep up the good work.

05-17-2009, 04:00 PM	#332
BIG CHEVY 3600 BIG CHEVY 3600 LONGBOX Join Date: Feb 2008 Location: Dallas, Texas Posts: 382	Re: 52 Project Got mine from CCP __________________ If I were given 8 hours to chop down a large tree, I would spend the first 6 hours sharpening my ax. Abraham Lincoln http://s729.photobucket.com/albums/w...cpZZ3QQtppZZ20

05-17-2009, 04:10 PM	#333
BIG CHEVY 3600 BIG CHEVY 3600 LONGBOX Join Date: Feb 2008 Location: Dallas, Texas Posts: 382	Re: 52 Project I have quit using Webshots and gone to Photobucket. I got tired of all the crap Webshots hands out. __________________ If I were given 8 hours to chop down a large tree, I would spend the first 6 hours sharpening my ax. Abraham Lincoln http://s729.photobucket.com/albums/w...cpZZ3QQtppZZ20

05-17-2009, 06:37 PM	#334
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: 52 Project Worked on the steering linkage today and figured out that I have lots more work to do before I am happy with it...lol. Actually I need to get another ujoint that dad is going to order this week. I think that the double joint will work....I hope. Once I get that figured out then I can install the support bearing. Everything I tried I was running into something...this is as close as I got but the center joint is in a bind. Here are a couple of pictures. Attached Images __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021 Last edited by pgf545; 05-17-2009 at 06:39 PM. Reason: forgot pictures....duh

05-17-2009, 06:41 PM	#335
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: 52 Project Also mystery box arrived this week..... Attached Images __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021

05-17-2009, 06:53 PM	#336
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: 52 Project Nice! __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

05-17-2009, 10:38 PM	#337
BIG CHEVY 3600 BIG CHEVY 3600 LONGBOX Join Date: Feb 2008 Location: Dallas, Texas Posts: 382	Re: 52 Project You are looking good. I still have to install my steer col. __________________ If I were given 8 hours to chop down a large tree, I would spend the first 6 hours sharpening my ax. Abraham Lincoln http://s729.photobucket.com/albums/w...cpZZ3QQtppZZ20

05-18-2009, 02:07 AM	#338
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: 52 Project Hey Bernie, maybe a tranny in that TCI box? __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

05-18-2009, 08:46 AM	#340
bensimmons_05 Registered User Join Date: Dec 2007 Location: Jacksonville, AL Posts: 479	Re: 52 Project ohhhhhh new TCI tranny! I wanna see that thing. You have been busy ordering! __________________ ---Ben Jammin's 1955 Chevy/GMC Project --- ---The shop's live video feed--- <<< See what I'm up to!

05-25-2009, 10:34 PM	#341
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: 52 Project Well I finally have steering.....YAAAAHOOOOO!!!!! I got all the u-joints and shafts done and actually lifted it up and ran it lock to lock a few times. I still have the support bearing brackets clamped and will weld in once we take the motor out. I am going to pull the motor so I can install the new transmission. So once we do that I will weld the brackets. Also there is a few more things I need to weld on. He is a few pictures. Bernie Attached Images __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021

05-26-2009, 12:31 AM	#343
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 52 Project when i did my steering, i considered using one of those drop units that i've seen in the Summit and Speedway catalogs, but wasn't sure how i'd support it. In the end i ended up running mine much like yours. I did have a bit more room though since my engine is mounted what appears to be a bit higher than yours. Things are lookin' really good here. before you know it, you'll be out driving it __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-26-2009, 10:05 PM	#346
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: 52 Project Nice job Bernie!!! __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

06-02-2009, 08:24 PM	#347
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: 52 Project Got a little out with the old in with the new this past weekend. Pulled the motor and tranny out and got the new 700R4 mounted to the motor. I need to get some help to move the cab so that I can rework the transmission cross member. I also welded in the brackets for the steering linkage. I won't be able to work on it this weekend because my youngest is graduating from High School...YaaaaHoooo!!!! Hopesully next weekend I can get that stuff done and start the body work. I think most of the fitting is done and should be coming together now...I hope. Here are a couple of pictures that I took this weekend. Bernie Attached Images __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021

07-03-2009, 11:06 PM	#348
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: 52 Project Ok not a lot going on exciting. I have been doing some detail work. I needed to make some clearance for the headers and the steering linkage around the rack. The u-joint was going to rub so I notched it and filled it in with a piece of tubing. Other than that I haven't been doing to much. Been really busy with my youngest son and getting him ready to start college in the fall. My dad is going to paint these reworked areas this week so maybe I can get the motor in its final resting spot and start with the brake, fuel and power steering lines. Here are a couple of pictures of what I have been up to. Bernie Attached Images __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021



Register or Log In To remove these advertisements.

07-04-2009, 12:12 PM	#349
4DSEVEN Registered User Join Date: Jan 2009 Location: Ontario Canada Posts: 239	Re: 52 Project Bernie can you tell me what thickness of sheet metal you used? (assuming that is how it is bought?) I have some floor patching and not sure what to ask for at Metal Mart.

Register or Log In To remove these advertisements.