laying frame with PB trailing arms - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Impalapawpaw · 04-21-2010, 10:29 AM

Quote:

Originally Posted by porterbuilt

There's a different panhard bar bracket for the weld-in notch... It looks like I sent you and Impalapawpaw the one for the bolt-in notch. The one used for the weld-in notch locates the panhard bar further towards axle center so the bar clears the notch. I will send out some new brackets to you guys this week!

This is way i tell people i do business with you .SERVICE is top notch

layingC10nK5 · 04-21-2010, 07:00 PM

Quote:

Originally Posted by Impalapawpaw

This is way i tell people i do business with you .SERVICE is top notch

You get what you pay for... Thanks for pointing that out I have not cut the fre section out but my friend was concerned with clearence in that are.

Hey Nate thanks for sending the replacement bracket, would hate to rub off any of the powder coat... If it's more convinient for you put in the box with my dropmember :-). Thanks great service as allways worth EVERY penny.

kold187um · 05-07-2010, 09:07 PM

What up big dog? they finnally let me post on your page.

here is a link to our car club topic on lay it low http://www.layitlow.com/forums/index...owtopic=512953

go check out my build (HUCKLEBERRY HOUND) comming real soon. welcome to the STR8TIPPIN family!!!

layingC10nK5 · 05-23-2010, 12:32 AM

ok guys got some progress on the fame. got the bag brackets in place. heres some pics.

layingC10nK5 · 05-23-2010, 12:38 AM

a few more...

layingC10nK5 · 05-23-2010, 12:40 AM

today we got the rear completly done

we have the frame on bags with shocks and panhard bar. it all came out great lays frame with a 31 /12 inch tall tire. will post pics of that soon

shores6 · 05-23-2010, 01:05 AM

lookin good! what's the plan for the front? dropmember?

fastcam1 · 05-23-2010, 03:02 AM

what are you gonna do about a track bar?

SCOTI · 05-23-2010, 12:29 PM

Quote:

Originally Posted by layingC10nK5

today we got the rear completly done

we have the frame on bags with socks and panhard bar. it all came out great lays frame with a 31 /12 inch tall tire. will post pics of that soon

Is the 'sock' option necessary for laying out on +30" tall tires

.
Nice progress!

layingC10nK5 · 05-23-2010, 04:23 PM

Quote:

Originally Posted by SCOTI

Is the 'sock' option necessary for laying out on +30" tall tires

.
Nice progress!

lol thanks for pointing that out.

layingC10nK5 · 05-23-2010, 04:35 PM

Quote:

Originally Posted by shores6

lookin good! what's the plan for the front? dropmember?

yes sir if u look at he last pic u can see the pb sway bar and the boxes holding my DM and chromoly PB arms

im have to weld up the front of the frame. the p/o started a Z on it and im going to finish it. the plan is to run 24" wheels all around.

as for the track bar we have intalled a panhard bar (pics soon). i tried using a delux trac bar from early classics but it didnt work right. ended up making one from chromoly tubing and a cupple heim joints.

kold187um · 05-25-2010, 12:41 PM

whats up big dog? yo project is looking real good!!!
i've been off work for about a month and a half, will be back after the fourth of july.
sold the 66 impala and now i'm working on a 64 impala. the lincoln will be out next week.

panhandler62 · 05-25-2010, 12:57 PM

Quote:

Originally Posted by Impalapawpaw

This is way i tell people i do business with you .SERVICE is top notch

+10

Nate has always been "Johnny on the Spot" whether it was an issue with a part or just my own befuddlement on how to hook it up.

I'll take my shoes off just so I can give him 4 thumbs up!

kvn1011 · 05-25-2010, 01:01 PM

24's???? That's awefully big lol
But it happens to be the same size wheel I'm gonna run too
Can wait to see more!

m6z · 05-26-2010, 01:55 PM

Looks great. What did you set the pinion anlge at? Did you set it at your desired ride height?

Thanks,
Doug

layingC10nK5 · 07-13-2010, 04:17 AM

hey guys i finished all the work on my frame. pb front and rear also did the 2inch Z. tomorow im headed to powder coat and need ur opinion. the frame will be black and suspension parts purple. colors are set in stone however my friend and my brother think it will be too much purple to do ALL The PB parts purple. any input or pics of ur set-up would be great. thanks in advance. pics coming soon

**kev2809** · 07-13-2010, 06:51 AM

lookin good! lookin forward to some pics!

VA72C10 · 07-13-2010, 09:51 AM

Quote:

Originally Posted by layingC10nK5

hey guys i finished all the work on my frame. pb front and rear also did the 2inch Z. tomorow im headed to powder coat and need ur opinion. the frame will be black and suspension parts purple. colors are set in stone however my friend and my brother think it will be too much purple to do ALL The PB parts purple. any input or pics of ur set-up would be great. thanks in advance. pics coming soon

I'd say do the frame, crossmembers, and front dropmember in black. Control arms, trailing arms, and smaller parts (shocks, loose brackets, panhard/sway bars, etc) in purple. I did a similar combo with hammered black and hammered silver and was happy with the contrast without it being "too much"

tubbedII · 07-16-2010, 04:14 PM

I agree with ^, or maybe even a little less. Any moving parts in purple and stationary parts in black.

layingC10nK5 · 08-31-2010, 09:55 PM

heres the update...

layingC10nK5 · 08-31-2010, 09:58 PM

and more...

**N2TRUX** · 08-31-2010, 11:16 PM

Everything looks great, but I am confused. Why did you Z the frame AND do a Dropmember?

layingC10nK5 · 08-31-2010, 11:36 PM

the previous owner Zed the frame, i just finished it and made it stronger. im runing 24inch wheels so the Z will allow it to lay. the dropmember alone allows u to lay 29 1/2 inch tire combo, 24's are around 31 1/2

DRTYRAT30 · 09-01-2010, 12:07 AM

Nice keep up the progress pic's

nastyc10 · 09-01-2010, 02:00 AM

Nice progress! Have you picked a wheel yet?

05-07-2010, 09:07 PM	#28
kold187um Registered User Join Date: Apr 2010 Location: los angeles california Posts: 3	Re: laying frame with PB trailing arms What up big dog? they finnally let me post on your page. here is a link to our car club topic on lay it low http://www.layitlow.com/forums/index...owtopic=512953 go check out my build (HUCKLEBERRY HOUND) comming real soon. welcome to the STR8TIPPIN family!!! Last edited by kold187um; 05-07-2010 at 09:09 PM.

05-23-2010, 12:32 AM	#29
layingC10nK5 Registered User Join Date: Jul 2009 Location: Los Angeles,CA Posts: 110	Re: laying frame with PB trailing arms ok guys got some progress on the fame. got the bag brackets in place. heres some pics. Attached Images

05-23-2010, 12:38 AM	#30
layingC10nK5 Registered User Join Date: Jul 2009 Location: Los Angeles,CA Posts: 110	Re: laying frame with PB trailing arms a few more... Attached Images

05-23-2010, 12:40 AM	#31
layingC10nK5 Registered User Join Date: Jul 2009 Location: Los Angeles,CA Posts: 110	Re: laying frame with PB trailing arms today we got the rear completly done we have the frame on bags with shocks and panhard bar. it all came out great lays frame with a 31 /12 inch tall tire. will post pics of that soon Last edited by layingC10nK5; 05-23-2010 at 04:18 PM.

05-23-2010, 01:05 AM	#32
shores6 Registered User Join Date: Mar 2010 Location: Stigler, OK Posts: 115	Re: laying frame with PB trailing arms lookin good! what's the plan for the front? dropmember?

05-23-2010, 03:02 AM	#33
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: laying frame with PB trailing arms what are you gonna do about a track bar? __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

05-25-2010, 12:41 PM	#37
kold187um Registered User Join Date: Apr 2010 Location: los angeles california Posts: 3	Re: laying frame with PB trailing arms whats up big dog? yo project is looking real good!!! i've been off work for about a month and a half, will be back after the fourth of july. sold the 66 impala and now i'm working on a 64 impala. the lincoln will be out next week.

05-25-2010, 01:01 PM	#39
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: laying frame with PB trailing arms 24's???? That's awefully big lol But it happens to be the same size wheel I'm gonna run too Can wait to see more!

05-26-2010, 01:55 PM	#40
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: laying frame with PB trailing arms Looks great. What did you set the pinion anlge at? Did you set it at your desired ride height? Thanks, Doug __________________ Doug Looking for a 67-72 short bed driver.....

07-13-2010, 04:17 AM	#41
layingC10nK5 Registered User Join Date: Jul 2009 Location: Los Angeles,CA Posts: 110	Re: laying frame with PB trailing arms hey guys i finished all the work on my frame. pb front and rear also did the 2inch Z. tomorow im headed to powder coat and need ur opinion. the frame will be black and suspension parts purple. colors are set in stone however my friend and my brother think it will be too much purple to do ALL The PB parts purple. any input or pics of ur set-up would be great. thanks in advance. pics coming soon

07-13-2010, 06:51 AM	#42
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,134	Re: laying frame with PB trailing arms lookin good! lookin forward to some pics! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

07-16-2010, 04:14 PM	#44
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: laying frame with PB trailing arms I agree with ^, or maybe even a little less. Any moving parts in purple and stationary parts in black. __________________ 1970 2wd Blazer

08-31-2010, 09:55 PM	#45
layingC10nK5 Registered User Join Date: Jul 2009 Location: Los Angeles,CA Posts: 110	Re: laying frame with PB trailing arms heres the update... Attached Images

08-31-2010, 09:58 PM	#46
layingC10nK5 Registered User Join Date: Jul 2009 Location: Los Angeles,CA Posts: 110	Re: laying frame with PB trailing arms and more... Attached Images

08-31-2010, 11:16 PM	#47
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: laying frame with PB trailing arms Everything looks great, but I am confused. Why did you Z the frame AND do a Dropmember? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"



Register or Log In To remove these advertisements.

08-31-2010, 11:36 PM	#48
layingC10nK5 Registered User Join Date: Jul 2009 Location: Los Angeles,CA Posts: 110	Re: laying frame with PB trailing arms the previous owner Zed the frame, i just finished it and made it stronger. im runing 24inch wheels so the Z will allow it to lay. the dropmember alone allows u to lay 29 1/2 inch tire combo, 24's are around 31 1/2

09-01-2010, 12:07 AM	#49
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: laying frame with PB trailing arms Nice keep up the progress pic's

09-01-2010, 02:00 AM	#50
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: laying frame with PB trailing arms Nice progress! Have you picked a wheel yet?

Register or Log In To remove these advertisements.