KS Parting out 72 Chevy 3/4 ton SB Custom Camper

[Cash3481]

Pics of an original radio with mount.
Additional mount I have extra.
Cups and hardware for this radio

[Cash3481]

2 different Speakers

[cericd]

I'll pass on the lighter. It's not the original style. Were you able to locate the extra set of exterior handles you thought you had?
Posted via Mobile Device

[Cash3481]

Trim pics!
I got most of it off but not the front end or by gas filler, ran out of light today.
Mike

[Cash3481]

rest of the trim pics

[Sizemore 65]

How much for the complete sterring shaft from the rag joint and column together. How much shipping to 37604. Do you take pay pal?

Thanks
Aaron

[Cash3481]

Originally Posted by thelonerife

ok how much shipped to 37043?

I have to get the entire upper and lower off this truck for a total shipping quote for the guy first in line and then Ill work these other deals after that... the shipping on the tailgate trim your wanting is $8.20 if this other deal falls through. The bed trim will kill most deals since its so long the oversize charge is like $72 just for that box.

Originally Posted by cericd

I'll pass on the lighter. It's not the original style. Were you able to locate the extra set of exterior handles you thought you had?
Posted via Mobile Device

I did not locate them but didnt look long since I ran out of light. I know they are in the tubs I just need to get to it. Also the lighter in this truck is still there I havent removed it yet so It may be what you are looking for. Ill have it out by Friday night. I need to get this trim out of the way before I get stoned by these guys.lol

Mike

[Cash3481]

Originally Posted by Sizemore 65

How much for the complete sterring shaft from the rag joint and column together. How much shipping to 37604. Do you take pay pal?

Thanks
Aaron

Aaron:
My assumption is that you dont want the steering wheel? $65 for the column and $20 for the shaft and rag joint. Ill see how big the box is and let you know shipping tomorrow. Ill remove the intermediate shaft and ragjoint and get it all in the same box.
Mike

[cericd]

Originally Posted by Cash3481

I did not locate them but didnt look long since I ran out of light. I know they are in the tubs I just need to get to it. Also the lighter in this truck is still there I havent removed it yet so It may be what you are looking for. Ill have it out by Friday night. I need to get this trim out of the way before I get stoned by these guys.lol

Mike

No problem. I take a look when get a chance to post 'em.

Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

[Sizemore 65]

No I don't need the steering wheel. What emblem is in the horn button? Do you have a bowtie emblem?

Thanks
Aaron

[Cash3481]

Originally Posted by Sizemore 65

No I don't need the steering wheel. What emblem is in the horn button? Do you have a bowtie emblem?

Thanks
Aaron

Not for this grant wheel. I do have a saddle repop horn button for a factory wheel that is chevy. If that's what your looking for I'll get a picture in the am before work.
Mike
Posted via Mobile Device

[zeusflash]

I am still interested in the complete side trim for this truck and even the taillight trim if you can get it off with out bad damage. As there seems to be some controversy about who is first in line I will leave that up to your judgment. Keep in mind that if you feel the other person was first then that is fine with me. I will always abide by board rules and besides I know this board well enough to also know that I can find another set of trim. Thats what makes this board so great! Understand that there will be no hard feelings on my part. Please keep me posted.

[Cash3481]

Originally Posted by zeusflash

I am still interested in the complete side trim for this truck and even the taillight trim if you can get it off with out bad damage. As there seems to be some controversy about who is first in line I will leave that up to your judgment. Keep in mind that if you feel the other person was first then that is fine with me. I will always abide by board rules and besides I know this board well enough to also know that I can find another set of trim. Thats what makes this board so great! Understand that there will be no hard feelings on my part. Please keep me posted.

That is the hard part! I started this post with the trim listed as sold pending becuase you asked about it in the other thread. I posted there that I would send you the link when I started the new partout of that truck. Admittedly it has taken me too long to get the trim off and I own up to that but others are asking and considering themselves first (because of their first posting). I have thought about this and needto figure it out today so everyone knows where they stand before everyone decides to pass. I will post this afternoon where we stand and get it all straingt for you both. I appologise for the confusion.

Mike

[zeusflash]

No need for apologies,it is a confusing situation and I am not sure how the board rules apply since it is part thread and part PM. Just let me know what your decision is. I am good with whatever decision you make. I want to be clear on that Also know that I am in no hurry. If it takes a few weeks to get the moldings off that is fine by me,I know how much work it is to get them off without damage.

[Cash3481]

All, I think I figured everything out for the other thread and this one. So here goes...
1 Zeus:
You were first to ask for the d/s trim for the bed in the 1/2 ton Sierra (post 88). I showed the pics of this truck before the partout and you asked to get told when it gets parted, so I pm'd you the link and said you would be first, then, In the new thread you changed to the entire trim after others asked.

Originally Posted by 496bb

i believe i am first in line on trim.....

2. 496:
You also inquired on the trim and wheels from this truck in the previous thread (post 106). I pm'd you the link as well as mentioned in the thread.
You requested the entire trim and there was pm's from you and I about the entire trim. This is where I messed up thinking you and Zeus were the same person. I should have waited on the pictures and everything until the new thread (someone's gonna call me a rookie!)... Which is true.

Originally Posted by thelonerife

If you can get them off without breaking any studs and include the inserts or nuts whichever it has. Price?

on the tailgate trim. I need the fasteners/clips if possible too. price?

Theloanrife:
You sir are an innocent bystander and got in the middle of this since I assumed the only wanted the tailgate trim and that they wanted the bedside trim.


In the end:
1. I think the best play is that I offer Zeus the d/s trim first to satisify my word from the first thread. (I should never have mixed the threads)

2. The rest of the upper/lower trim needs to get offered to 496!

3. The tailgate trim should get offered to theloanrife... even if the mistake was mine about who needed what and the confusion.

If anyone wants to pass I understand and I will attempt to not make this mistake again, that seems like the most honest and accurate way to proceed. I hope everyone understands the spot I put myself in and the decision process behind the correction.

V/R,
Mike
Posted via Mobile Device

[thelonerife]

I just need a price on the camper emblems and upper tailgate trim 3pcs shipped to 37043. The price would be the deciding factor for me..

[zeusflash]

Sounds right to me. I will have to pass since shipping is too expensive for a few pieces of trim. If all the trim less the tailgate stuff becomes available let me know. Thanks

[RPIcka]

any pics of the gauge cluster?

[Cash3481]

Originally Posted by thelonerife

I just need a price on the camper emblems and upper tailgate trim 3pcs shipped to 37043. The price would be the deciding factor for me..

With the confusion let me know what its worth to you and Ill get it out to you on Sat (if I dont break anything off) for all the problems it created then we can add the shipping.

Originally Posted by zeusflash

Sounds right to me. I will have to pass since shipping is too expensive for a few pieces of trim. If all the trim less the tailgate stuff becomes available let me know. Thanks

I appreciate it. I actually have a bunch more trim out there and will post pics in case there is enough for a set. (didnt know I had that much trim out there)

Originally Posted by RPIcka

any pics of the gauge cluster?

Ill post one of the steering wheel and you can see it behind the wheel. Ill get you some more of others I have as well in a few.

Mike

[Cash3481]

RPIcka/all:
Here is a few dashes I have and the one of course in this truck is not removed yet. $40 plus shipping on your choice for dashes. The light green dash temp gage wasnt hooked up so I dont know if it worked but the rest I was told were functioning in the trucks they were in before teardown.
Mike

[thelonerife]

Hows 40+shipping?

[Cash3481]

Originally Posted by thelonerife

Hows 40+shipping?

Done! I'll get it off as mentioned and ready to ship. I'll confirm condition after removal first.
Mike
Posted via Mobile Device

[zeusflash]

Sounds good to me. If you can come up with a decent full set let me know.

[67 Chevy PU]

Interested in your brake pedal assy, live in Wichita and was wondering if
I could come by and take a look at it and save a little money on shipping.

Thanks Terry

[Cash3481]

Originally Posted by 67 Chevy PU

Interested in your brake pedal assy, live in Wichita and was wondering if
I could come by and take a look at it and save a little money on shipping.

Thanks Terry

Terry,
I could just bring it to the base with me and we can get together at lunch or after work one night. I have several of these pedals if you need one. Do you need the 400 switch for a 72 or just the pedal? I have both just need to know what to bring. If you need it this weekend PM me you phone number and we can figure out a time. How about $25?
Mike