RI Cabs for patch panel cuts - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

old Chevy guy · 04-10-2012, 07:58 AM

I can probably do the drivers side but not sure about passengers side. I will have to look after work and let you know.

old Chevy guy · 04-15-2012, 05:29 PM

Quote:

Originally Posted by Racinaround

Any more Cowl pieces like you sold Loosecanonzs??
I need the same peices both sides

The stuff that was apart didnt have good pieces,I think there are some good ones but I have to take more stuff apart to get them including the cab Im taking off my truck. I can Pm you when it happens but Im not sure how soon it will be. How bad do you need them?

**derotoreut** · 04-15-2012, 09:16 PM

Looking for good uncut AC dash. Have anything?

old Chevy guy · 04-15-2012, 09:25 PM

Sorry only one uncut dash left and its non AC

**derotoreut** · 04-15-2012, 09:38 PM

Need good uncut AC dash. Anything?

**derotoreut** · 04-15-2012, 09:38 PM

Sorry. Didn't see message.

**derotoreut** · 04-15-2012, 09:39 PM

Quote:

Originally Posted by old Chevy guy

Sorry only one uncut dash left and its non AC

How much for the non-AC dash shipped to 14036.

Racinaround · 04-15-2012, 10:11 PM

Anytime been lookin for a while!!

old Chevy guy · 04-15-2012, 10:14 PM

The last one went to louisiana I think and it cost $60 to ship it but your considerably closer so Id like to believe it would be less. I actually have two, one is completly uncut the other is mostly uncut. Id like to get $60 for the completly un cut but I would go $40 for the mostly uncut. Mostly uncut consists of the rectangular radio hole is complete but some one cut slots between the center and the knob holes. It would show with an origanal radio but if you had something that was aftermarket that had a face plate it wouldn't show. I can post a picture of that one tomorrow. The uncut one is not here at my house and would take a few days to get a chance to go retrieve it. Where do you want to seam it? If you do it under the dash pad I can do better on the price and the shipping. Lmk Frank

old Chevy guy · 04-15-2012, 10:16 PM

Quote:

Originally Posted by Racinaround

Anytime been lookin for a while!!

I'll see what I can do to speed up the progress.

old Chevy guy · 05-04-2012, 07:12 PM

still have some stuff

floppydoodle · 05-22-2012, 08:44 AM

Do you still have the pieces you cut off for loosecannonzs that he didn't want? If so how to 70737?
Posted via Mobile Device

old Chevy guy · 05-22-2012, 10:17 AM

What pieces do you need? I have a corner for the passengers side that was a bit too small for him to use. That 's the only thing he didn't take,I cut a bigger one from something else. I have stuff to cut up yet though just let me know what you need and I'll see what I can do.

floppydoodle · 05-22-2012, 10:52 AM

Now looking at the pick it looks a little short for me too. I really need both driver and passenger side like you cut in post#56

old Chevy guy · 05-22-2012, 12:01 PM

Are you fixing rot or dents? Give me some measurement of what you are looking for and Ill send you pictures of what I have left.

Racinaround · 05-22-2012, 12:02 PM

Quote:

Originally Posted by old Chevy guy

What pieces do you need? I have a corner for the passengers side that was a bit too small for him to use. That 's the only thing he didn't take,I cut a bigger one from something else. I have stuff to cut up yet though just let me know what you need and I'll see what I can do.

Was the someone else me?

old Chevy guy · 05-22-2012, 12:55 PM

Quote:

Originally Posted by Racinaround

Was the someone else me?

No he is looking for some upper cab corner patches,I had a piece I cut out before but it was too small. The parts you want are still on the cab of my truck that I havent been able to take apart yet or finish my new cab either. Im a self employed contractor and a couple of jobs that I took turned out to be completly destroyed well above the job scope with powder post beetles ,ants and water damage. Good job security but made it hard to get work done at home.

floppydoodle · 05-23-2012, 09:09 AM

Ok after I measured it looks like the piece in Post#51 will work. I am going to hold of on the drivers side for now. Is this piece dent free on the body lines? If so how much to ship it to 70737?

old Chevy guy · 05-23-2012, 10:10 AM

I'll double check for dent and I'll get that figure for you later today

old Chevy guy · 05-23-2012, 08:22 PM

I dont see any dents on the body lines. The estimate for fed ex is $20 for 3 day ground and the other corners I sold like that I got $35 plus shipping but If you want it I will do $50 shipped.

floppydoodle · 07-06-2012, 10:51 PM

Sorry for the delay do you still have the piece above?
Posted via Mobile Device

old Chevy guy · 07-06-2012, 11:44 PM

Yes I do.

floppydoodle · 07-07-2012, 07:55 AM

Can you send me payment info?
Posted via Mobile Device

old Chevy guy · 07-07-2012, 03:46 PM

Sent you a PM

04-10-2012, 07:58 AM	#126
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: Cabs for patch panel cuts I can probably do the drivers side but not sure about passengers side. I will have to look after work and let you know.

04-15-2012, 09:16 PM	#128
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,847	Re: Cabs for patch panel cuts Looking for good uncut AC dash. Have anything? __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

04-15-2012, 09:25 PM	#129
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: Cabs for patch panel cuts Sorry only one uncut dash left and its non AC

04-15-2012, 09:38 PM	#130
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,847	Re: Cabs for patch panel cuts Need good uncut AC dash. Anything? __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

04-15-2012, 09:38 PM	#131
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,847	Re: Cabs for patch panel cuts Sorry. Didn't see message. __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

04-15-2012, 10:11 PM	#133
Racinaround Registered User Join Date: Oct 2009 Location: Mountlake Terrace, WA Posts: 260	Re: Cabs for patch panel cuts Anytime been lookin for a while!! __________________ 1950 Chevy 1500 1961 C-10 1969 C-10 1971 Chevelle 2008 Dodge HD3500 Tow Rig

04-15-2012, 10:14 PM	#134
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: Cabs for patch panel cuts The last one went to louisiana I think and it cost $60 to ship it but your considerably closer so Id like to believe it would be less. I actually have two, one is completly uncut the other is mostly uncut. Id like to get $60 for the completly un cut but I would go $40 for the mostly uncut. Mostly uncut consists of the rectangular radio hole is complete but some one cut slots between the center and the knob holes. It would show with an origanal radio but if you had something that was aftermarket that had a face plate it wouldn't show. I can post a picture of that one tomorrow. The uncut one is not here at my house and would take a few days to get a chance to go retrieve it. Where do you want to seam it? If you do it under the dash pad I can do better on the price and the shipping. Lmk Frank

05-04-2012, 07:12 PM	#136
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: Cabs for patch panel cuts still have some stuff

05-22-2012, 08:44 AM	#137
floppydoodle Registered User Join Date: Feb 2010 Location: louisiana Posts: 130	Re: Cabs for patch panel cuts Do you still have the pieces you cut off for loosecannonzs that he didn't want? If so how to 70737? Posted via Mobile Device

05-22-2012, 10:17 AM	#138
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: Cabs for patch panel cuts What pieces do you need? I have a corner for the passengers side that was a bit too small for him to use. That 's the only thing he didn't take,I cut a bigger one from something else. I have stuff to cut up yet though just let me know what you need and I'll see what I can do.

05-22-2012, 10:52 AM	#139
floppydoodle Registered User Join Date: Feb 2010 Location: louisiana Posts: 130	Re: Cabs for patch panel cuts Now looking at the pick it looks a little short for me too. I really need both driver and passenger side like you cut in post#56

05-22-2012, 12:01 PM	#140
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: Cabs for patch panel cuts Are you fixing rot or dents? Give me some measurement of what you are looking for and Ill send you pictures of what I have left.

05-23-2012, 09:09 AM	#143
floppydoodle Registered User Join Date: Feb 2010 Location: louisiana Posts: 130	Re: Cabs for patch panel cuts Ok after I measured it looks like the piece in Post#51 will work. I am going to hold of on the drivers side for now. Is this piece dent free on the body lines? If so how much to ship it to 70737?

05-23-2012, 10:10 AM	#144
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: Cabs for patch panel cuts I'll double check for dent and I'll get that figure for you later today

05-23-2012, 08:22 PM	#145
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: Cabs for patch panel cuts I dont see any dents on the body lines. The estimate for fed ex is $20 for 3 day ground and the other corners I sold like that I got $35 plus shipping but If you want it I will do $50 shipped.



Register or Log In To remove these advertisements.

07-06-2012, 10:51 PM	#146
floppydoodle Registered User Join Date: Feb 2010 Location: louisiana Posts: 130	Re: Cabs for patch panel cuts Sorry for the delay do you still have the piece above? Posted via Mobile Device

07-06-2012, 11:44 PM	#147
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: Cabs for patch panel cuts Yes I do.

07-07-2012, 07:55 AM	#148
floppydoodle Registered User Join Date: Feb 2010 Location: louisiana Posts: 130	Re: Cabs for patch panel cuts Can you send me payment info? Posted via Mobile Device

07-07-2012, 03:46 PM	#149
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: Cabs for patch panel cuts Sent you a PM

Register or Log In To remove these advertisements.