Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-30-2018, 01:37 PM | #1 |
Registered User
Join Date: Jan 2017
Location: Larkspur, Colorado
Posts: 904
|
Are brake caliper and rotor dimensions the same 1/2 vs 3/4ton '71-'72?
Can someone tell me if 1/2 and 3/4 ton '71 - '72s take the same caliper and if The outside diameter and thickness of the rotor are the same? I'm aware of the five stud eight stud difference, just need to know the dimensions.
Thanks, Steve weim55 Colorado |
08-30-2018, 02:41 PM | #2 |
Registered User
Join Date: Feb 2011
Location: Parkville, MD
Posts: 1,024
|
Re: Are brake caliper and rotor dimensions the same 1/2 vs 3/4ton '71-'72?
Looking at rock auto.
Centric lists the same caliper for C10 pickups and C20 pickups 1971-1978. C20 rotors - 12.5" OD, 1.29" nom thickness, 1.22" min thickness. https://www.rockauto.com/en/moreinfo...031746&jsn=597 C10 rotors - 11.85" OD, 1.28" nom thickness, 1.21" min thickness https://www.rockauto.com/en/moreinfo...029888&jsn=699 So looks like the thickness is about the same, but diameter is different.
__________________
1970 C20 Custom Camper - 350, TH350 1997 GMC Suburban 1994 Acura Integra GSR 1987 Dodge Daytona Shelby Z |
08-30-2018, 02:43 PM | #3 |
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,714
|
Re: Are brake caliper and rotor dimensions the same 1/2 vs 3/4ton '71-'72?
The calipers use a different piston size if I remember, but when I did the 8 lug swap on my Jimmy I kept the 1/2 ton calipers and 1/2 ton master cylinder but obviously used the 3/4 ton wheel cylinders. I was able to reuse my original parking brake cables FWIW on the donor 9.5" semi-float 14 bolt from an '86 Suburban.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
Bookmarks |
|
|