My 4-link install

[entourageguy]

Finally getting around to posting some pics.
I picked up an ART 4-link with bags for 88-98chev pickup off ebay. I had to shorten the bars an inch and made up some plates to mount to the frame. Did a C-notch and made up some boxing plates as well. The axle is only 2 5/8" dia and the kit is for a 3" axle so I cut up a 3" piece of tubing to make up the difference when attaching to the axle. I've got rebuilt calipers and turned rotors. The parking brake cables are from a late 80s vette and are a good length for the stock mounting spot.

I've got the lower airbag mounts on the axle just need the upper mounts as well as the shock and panhard mounted. Then mount the 3 gal. tank and valves.

Anyone need a set of 5" lowering leaf springs and a truck 12 bolt

I started when the weather was still cold and pretty quiet at work. So I want to get this done but don't want to rush it.

Brian ...