IA 1970 Chevy C/20 Parting out - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 03-01-2011, 05:02 PM

Quote:

Originally Posted by karphan

Thanks LockDoc for the update.

No problem...

LockDoc

**Dieselwrencher** · 03-02-2011, 04:33 AM

Guys, I'm sorry for the delay on your parts. Back, heck I can't even remember right now, I had to go fill in for a guy at a feeder location in BFE. No net, no cell phone reception, and I was using a calling card from a pay phone. The town was teeny and I swear I was the only fool my age there. I stayed at a hotel which was a part of our hanger. The joys of being low man on the totem pole. I thought the other guys were BSing me before I left, nope not so much. I did have a lot of parts boxed up before I left scheduled for pick up with UPS. However, supposedly my usual UPS guy was on vacation and the stuff never got picked up. Then it rained hard and the boxes got trashed. My brother put it all away since UPS wouldn't accept them now. I tried to get him to re box the stuff but that didn't go too well. I am back now and will get your parts out as soon as I can. If anyone would like a refund just let me know. Again, sorry for the long wait for your parts.

jce4isu · 03-02-2011, 05:00 AM

good to all is well

**Dieselwrencher** · 03-02-2011, 01:14 PM

Thanks Joe.

**karphan** · 03-15-2011, 06:27 PM

Any updates? Another 2 weeks. Still no parts. Pm sent. Thanks, Dan

Fesser · 03-15-2011, 09:46 PM

Same here. PM sent. Thanks, Franks

**Dieselwrencher** · 03-18-2011, 09:01 PM

Quote:

Originally Posted by karphan

Any updates? Another 2 weeks. Still no parts. Pm sent. Thanks, Dan

Quote:

Originally Posted by Fesser

Same here. PM sent. Thanks, Franks

Guys, sorry for the delay. I got hosed into going out of town for work again, and I left the stuff with my brother to be shipped out. I just got a hold of him and he said he sent it out this week. When I get back I will make sure the stuff isn't still sitting there, but I doubtit is. Hopefully it is to you soon. Sorry for the inconvenience, Ryan.

TWOStep · 03-15-2011, 10:21 PM

Guess you still may have the bed? Believe you mentioned wood floor not to good, is the inner walls decent? Any pictures? $? Consider travel from Illinois if reasonable. Thanks.

**Dieselwrencher** · 03-18-2011, 09:02 PM

Quote:

Originally Posted by TWOStep

Guess you still may have the bed? Believe you mentioned wood floor not to good, is the inner walls decent? Any pictures? $? Consider travel from Illinois if reasonable. Thanks.

No, sorry the truck is gone.

**Dieselwrencher** · 03-18-2011, 09:17 PM

If anyone is still waiting on parts from this and you haven't heard from me as far as the status, please let me know. I don't want to leave anyone hanging. The last month has been bad enough. Thanks Ryan.

kiknrocks · 03-19-2011, 02:40 AM

Do u still have the hub caps?
Posted via Mobile Device

Fesser · 03-21-2011, 06:12 PM

Got all my parts today. The wheel looks especially nice. Thanks Ryan. Frank

FL71C10 · 03-21-2011, 08:33 PM

I'm still interested in the parts we talked about.

FL71C10 · 03-23-2011, 09:36 AM

Ryan,

I bought the correct water pump (short version) and it measures about 5 11/16" from the engine block to outside surface of the flange that the fan and pulley mount to. Can you double check to make sure that is the same as the one you have? I'd like to get this wrapped up soon and get the parts.

Thanks!

John

**karphan** · 03-21-2011, 08:30 PM

Finally got my parts today too. Take care. Dan

cdp · 04-02-2011, 12:50 AM

still got doors? I am new at this forum stuff i also have 70

CEE1NG_RED · 04-02-2011, 03:47 AM

If available...how much for the complete seatbelt set and what's the condition of the retractor cover, buckle, and belt itself. Also, do you have a complete rear bumper brackets/mount set? How much for each item shipped to 90807, Long Beach CA.? Thanks...

FL71C10 · 04-02-2011, 05:30 PM

Ryan,

Here are the measurements for both short and long pump.

John

http://67-72chevytrucks.com/vboard/s...d.php?t=455818

c1069 · 04-20-2011, 08:39 PM

Got my steering column yesterday, Thanks

1970K20 · 05-11-2011, 12:57 AM

Hi Ryan

Do you still have the C/20 badges?

Thanks
Posted via Mobile Device

**Dieselwrencher** · 05-30-2011, 01:29 PM

Quote:

Originally Posted by 1970K20

Hi Ryan

Do you still have the C/20 badges?

Thanks
Posted via Mobile Device

I do have some Custom/20's if that's what you're looking for.

**Dieselwrencher** · 05-26-2011, 12:51 AM

Yes it was an eaton axle. How ever the truck has been crushed and I no longer have the rear end. Sorry Ryan.

rdkonkel · 05-30-2011, 12:18 AM

I would like the doors with all the parts inside. Where are you located?
Ryan
Winona MN
custombuildremod@yahoo.com

**Dieselwrencher** · 05-30-2011, 01:33 PM

Quote:

Originally Posted by rdkonkel

I would like the doors with all the parts inside. Where are you located?
Ryan
Winona MN
custombuildremod@yahoo.com

I'm sorry but the doors were scrapped with the truck. Ryan. Check out Teeitup's parts threads. I'm going there this weekend and can bring parts back if needed. Then you could just meet me around here sometime to arrange a pick up. Ryan.

1972K20 · 05-30-2011, 02:37 PM

Quote:

Originally Posted by Dieselwrencher

I'm sorry but the doors were scrapped with the truck.

That's too bad...

03-02-2011, 04:33 AM	#2
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: 1970 Chevy C/20 Parting out Guys, I'm sorry for the delay on your parts. Back, heck I can't even remember right now, I had to go fill in for a guy at a feeder location in BFE. No net, no cell phone reception, and I was using a calling card from a pay phone. The town was teeny and I swear I was the only fool my age there. I stayed at a hotel which was a part of our hanger. The joys of being low man on the totem pole. I thought the other guys were BSing me before I left, nope not so much. I did have a lot of parts boxed up before I left scheduled for pick up with UPS. However, supposedly my usual UPS guy was on vacation and the stuff never got picked up. Then it rained hard and the boxes got trashed. My brother put it all away since UPS wouldn't accept them now. I tried to get him to re box the stuff but that didn't go too well. I am back now and will get your parts out as soon as I can. If anyone would like a refund just let me know. Again, sorry for the long wait for your parts. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

03-02-2011, 05:00 AM	#3
jce4isu Registered User Join Date: Mar 2010 Location: Des Moines, IA Posts: 203	Re: 1970 Chevy C/20 Parting out good to all is well __________________ 1972 build http://67-72chevytrucks.com/vboard/s...d.php?t=391344

03-02-2011, 01:14 PM	#4
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: 1970 Chevy C/20 Parting out Thanks Joe. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

03-15-2011, 06:27 PM	#5
karphan Senior Member Join Date: Nov 2010 Location: Sparks, NV Posts: 258	Re: 1970 Chevy C/20 Parting out Any updates? Another 2 weeks. Still no parts. Pm sent. Thanks, Dan

03-15-2011, 09:46 PM	#6
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: 1970 Chevy C/20 Parting out Same here. PM sent. Thanks, Franks

03-15-2011, 10:21 PM	#8
TWOStep Registered User Join Date: Jun 2006 Location: Newark, Illinois Posts: 25	Re: 1970 Chevy C/20 Parting out Guess you still may have the bed? Believe you mentioned wood floor not to good, is the inner walls decent? Any pictures? $? Consider travel from Illinois if reasonable. Thanks.

03-18-2011, 09:17 PM	#10
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: 1970 Chevy C/20 Parting out If anyone is still waiting on parts from this and you haven't heard from me as far as the status, please let me know. I don't want to leave anyone hanging. The last month has been bad enough. Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

03-19-2011, 02:40 AM	#11
kiknrocks 65 Chevy Join Date: Nov 2009 Location: LODI Ca Posts: 144	Re: 1970 Chevy C/20 Parting out Do u still have the hub caps? Posted via Mobile Device

03-21-2011, 06:12 PM	#12
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: 1970 Chevy C/20 Parting out Got all my parts today. The wheel looks especially nice. Thanks Ryan. Frank

03-21-2011, 08:33 PM	#13
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: 1970 Chevy C/20 Parting out I'm still interested in the parts we talked about. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

03-23-2011, 09:36 AM	#14
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: 1970 Chevy C/20 Parting out Ryan, I bought the correct water pump (short version) and it measures about 5 11/16" from the engine block to outside surface of the flange that the fan and pulley mount to. Can you double check to make sure that is the same as the one you have? I'd like to get this wrapped up soon and get the parts. Thanks! John __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

03-21-2011, 08:30 PM	#15
karphan Senior Member Join Date: Nov 2010 Location: Sparks, NV Posts: 258	Re: 1970 Chevy C/20 Parting out Finally got my parts today too. Take care. Dan

04-02-2011, 12:50 AM	#16
cdp Registered User Join Date: Apr 2011 Location: AKRON,OH Posts: 81	Re: 1970 Chevy C/20 Parting out still got doors? I am new at this forum stuff i also have 70

04-02-2011, 03:47 AM	#17
CEE1NG_RED Registered User Join Date: Oct 2009 Location: LBC California Posts: 497	Re: 1970 Chevy C/20 Parting out If available...how much for the complete seatbelt set and what's the condition of the retractor cover, buckle, and belt itself. Also, do you have a complete rear bumper brackets/mount set? How much for each item shipped to 90807, Long Beach CA.? Thanks... __________________ - 1967 Chevrolet C/10 SWB fleetside (New Project). - 1969 Chevrolet C/10 SWB fleetside (SOLD) - 2000 Ford Mustang 232 (DD) - 2003 Ford SVT Cobra "Terminator" 281 (Once in a blue moon driver/weekend driver)

04-02-2011, 05:30 PM	#18
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: 1970 Chevy C/20 Parting out Ryan, Here are the measurements for both short and long pump. John http://67-72chevytrucks.com/vboard/s...d.php?t=455818 __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.



Register or Log In To remove these advertisements.

04-20-2011, 08:39 PM	#19
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 1970 Chevy C/20 Parting out Got my steering column yesterday, Thanks __________________ Pancho 69 c/10 step side 454/400 with 3.07

05-11-2011, 12:57 AM	#20
1970K20 Registered User Join Date: Apr 2011 Location: Clearwater BC Posts: 8	Re: 1970 Chevy C/20 Parting out Hi Ryan Do you still have the C/20 badges? Thanks Posted via Mobile Device __________________ 1970 K20 2007 Dyna 1964 Airstream Overlander

05-26-2011, 12:51 AM	#22
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: 1970 Chevy C/20 Parting out Yes it was an eaton axle. How ever the truck has been crushed and I no longer have the rear end. Sorry Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-30-2011, 12:18 AM	#23
rdkonkel Registered User Join Date: Apr 2011 Location: Winona MN Posts: 22	Re: 1970 Chevy C/20 Parting out I would like the doors with all the parts inside. Where are you located? Ryan Winona MN custombuildremod@yahoo.com __________________ If it ain't smokin' fix it.

Register or Log In To remove these advertisements.