|
10-29-2010, 10:59 AM
|
#1 |
|
Registered User
Join Date: Jan 2007
Location: vernon b.c.
Posts: 3,022
|
noisy compressor
I was wanting to build a insulated box around my air compressor as is loud.Any suggestions,I don,t want it to overheat or starve it for air.Is just a little 4 hp.type and I can,t move it as is the only plug in that won,t set off the breakers
|
|
|
|
10-29-2010, 11:26 AM
|
#2 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: noisy compressor
is this an oilless compressor? if so not much can b done as they run very noisy and very hot any insulation will shorten thier already shortoverall lifespan
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
10-29-2010, 11:44 AM
|
#3 |
|
So,, what else you got???
 
Join Date: May 2010
Location: Jackson, Mo
Posts: 18,637
|
Re: noisy compressor
cdowns is correct. Do not build a box for it, it will overheat. We have one of those and it will run you out of the shop. Sitting them on a rubber mat helps,,,, some, but not too much. A belt driven compressor is the way to go..
|
|
|
|
|
10-29-2010, 04:37 PM
|
#4 |
|
Registered User
Join Date: Jan 2006
Location: Kaufman, Tx
Posts: 827
|
Re: noisy compressor
Agreed, while my oil-less did last a long time, I wish it would have died sooner. It absolutely hate listening to those things. many times i would use a breaker bar and a lot of cussing before I'd turn on the oil less and break out the impact.
Build a lean too outside for if you can.
__________________
You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels! 
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
