MO Parting a 68 C10 longbed, need anything?? - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c10monkey · 02-10-2013, 10:15 AM

Quote:

Originally Posted by specialtyretail

I do. $30.00 shipped. Thanks, Fred.

Can you show me a pic ?
Posted via Mobile Device

**specialtyretail** · 02-10-2013, 10:48 AM

SOLD.... THANKS.... Sure, I can do that. Thanks, Fred.

**specialtyretail** · 02-10-2013, 12:20 PM

Intermediate shaft is sold. Thanks, Fred.

**specialtyretail** · 02-10-2013, 03:39 PM

Pics of bezels and grill bowtie.... Thanks, Fred.

**specialtyretail** · 02-10-2013, 04:59 PM

Prices reduced on hood letters and molding. Thanks, Fred.

dirish · 02-10-2013, 05:19 PM

Thanks Fred, passing on gauges .
Posted via Mobile Device

**specialtyretail** · 02-10-2013, 06:30 PM

Quote:

Originally Posted by dirish

Thanks Fred, passing on gauges .
Posted via Mobile Device

Not a problem. Thanks for the interest...

1970 Bowtie · 02-11-2013, 08:34 PM

Hey Fred,I appreciate the pics of the caps and the rings.Its kinda hard to tell the condition of them because of the dirt on them.Wondering how you would rate the rings as far as condition? Still very interested..Mike.

**specialtyretail** · 02-11-2013, 11:15 PM

Quote:

Originally Posted by 1970 Bowtie

Hey Fred,I appreciate the pics of the caps and the rings.Its kinda hard to tell the condition of them because of the dirt on them.Wondering how you would rate the rings as far as condition? Still very interested..Mike.

Hey Mike. Let me give them a bath so we can see what they really look like. I will try to get that done Tuesday night if I can. Thanks, Fred.

1970 Bowtie · 02-12-2013, 08:26 AM

Quote:

Originally Posted by specialtyretail

Hey Mike. Let me give them a bath so we can see what they really look like. I will try to get that done Tuesday night if I can. Thanks, Fred.

No rush,whenever you get time.Thanks,Mike.

**specialtyretail** · 02-14-2013, 08:46 PM

Seat belts reduced to $23.00 shipped if anyone can use them. Thanks, Fred

tdj4bama · 02-15-2013, 04:43 AM

[/IMG]
Fred does it have this part? Anyone know what this part is called?

tdj4bama · 02-15-2013, 04:44 AM

[IMG]

[/IMG]

**Todd68Chevy** · 02-15-2013, 07:45 AM

Quote:

Originally Posted by tdj4bama

[IMG]

[/IMG]

The part circled looks like the parking brake lever. They side specific so if you do not need both sides then you need to specify which one you need. The image in the first post is not showing up to me.

tdj4bama · 02-15-2013, 08:27 AM

My parking brake doesn't work and I am missing that piece on each side so I figured that was the missing link so to speak. Thanks for the reply Todd and Fred if you have this I need one from each side shipped to 35633.
And I goofed up trying to post the picture the first time.
Posted via Mobile Device

**specialtyretail** · 02-15-2013, 08:58 AM

Right now we don't. The brakes were all chewd up and missing parts when we got this one. I will keep an eye out for one. Thanks, Fred.

iregalado · 02-16-2013, 07:06 AM

How much for both the headlights, round trim around headlights (not the bezels) , brackets for headlights and all hardware to 93905
Posted via Mobile Device

iregalado · 02-16-2013, 07:28 AM

Quote:

Originally Posted by iregalado

How much for both the headlights, round trim around headlights (not the bezels) , brackets for headlights and all hardware to 93905
Posted via Mobile Device

I apologize for not being specific, i only need headlights , rings around headlights, the plates that hold the headlights with springs and not the actual brackets that are welded into the radiator support. thank you.
Posted via Mobile Device

**specialtyretail** · 02-16-2013, 08:11 AM

Quote:

Originally Posted by iregalado

I apologize for not being specific, i only need headlights , rings around headlights, the plates that hold the headlights with springs and not the actual brackets that are welded into the radiator support. thank you.
Posted via Mobile Device

Not a problem. I was pretty sure what you meant. I am away from the shop right now but if memory serves me correctly, they should all fit in a large flat rate box. If so, how does $31.00 shipped sound. That will cover the shipping and get me a couple of cheeseburgers and an ice cold pepsi on my next trip to buy another truck. Thanks, Fred.

neverstock · 02-22-2013, 11:45 PM

I need right rear bedside patch panel

**specialtyretail** · 02-24-2013, 10:31 AM

Quote:

Originally Posted by neverstock

I need right rear bedside patch panel

Hey thete. The bed is pretty rough. It would need patch panels for me to cut out so I could sell some patch panels. Thanks, Fred.

Chibueno · 02-16-2013, 09:57 AM

I am interested in steering gear box and power steering pump setup .brackets etc. Thanks

iregalado · 02-16-2013, 01:50 PM

Sounds good to me ill take them . How do i pm ?
Posted via Mobile Device

aventur1 · 02-16-2013, 03:26 PM

Now that your in the grill area....how about those turn signals...check them out and see what you think and let me know...
Thanks

**specialtyretail** · 02-20-2013, 12:22 AM

Quote:

Originally Posted by aventur1

Now that your in the grill area....how about those turn signals...check them out and see what you think and let me know...
Thanks

Hey there. Finally got the front parking lamps pulled. I wil get you some pics Wednesday and see what you think. One of the lenses was broken into but I think I have a spare in one of my stuff boxes. Sorry for the delay, I appreciate your patience so far. Thanks, Fred.

02-10-2013, 10:48 AM	#2
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting a 68 C10 longbed, need anything?? SOLD.... THANKS.... Sure, I can do that. Thanks, Fred. Attached Images Last edited by specialtyretail; 02-10-2013 at 12:19 PM.

02-10-2013, 12:20 PM	#3
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting a 68 C10 longbed, need anything?? Intermediate shaft is sold. Thanks, Fred.

02-10-2013, 03:39 PM	#4
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting a 68 C10 longbed, need anything?? Pics of bezels and grill bowtie.... Thanks, Fred. Attached Images

02-10-2013, 04:59 PM	#5
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting a 68 C10 longbed, need anything?? Prices reduced on hood letters and molding. Thanks, Fred.

02-10-2013, 05:19 PM	#6
dirish Registered User Join Date: Dec 2012 Location: Heart of Tennessee Posts: 1,120	Re: Parting a 68 C10 longbed, need anything?? Thanks Fred, passing on gauges . Posted via Mobile Device

02-11-2013, 08:34 PM	#8
1970 Bowtie It's all in the timing Join Date: May 2009 Location: Lake Mary,Florida Posts: 600	Re: Parting a 68 C10 longbed, need anything?? Hey Fred,I appreciate the pics of the caps and the rings.Its kinda hard to tell the condition of them because of the dirt on them.Wondering how you would rate the rings as far as condition? Still very interested..Mike. __________________ The Dude Abides. ---------------------- I aint sayin, I'm just sayin.

02-14-2013, 08:46 PM	#11
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting a 68 C10 longbed, need anything?? Seat belts reduced to $23.00 shipped if anyone can use them. Thanks, Fred Last edited by specialtyretail; 02-20-2013 at 12:40 AM.

02-15-2013, 04:43 AM	#12
tdj4bama Registered User Join Date: Jul 2012 Location: Florence, AL Posts: 50	Re: Parting a 68 C10 longbed, need anything?? [/IMG] Fred does it have this part? Anyone know what this part is called?

02-15-2013, 04:44 AM	#13
tdj4bama Registered User Join Date: Jul 2012 Location: Florence, AL Posts: 50	Re: Parting a 68 C10 longbed, need anything?? [IMG][/IMG]

02-15-2013, 08:27 AM	#15
tdj4bama Registered User Join Date: Jul 2012 Location: Florence, AL Posts: 50	Re: Parting a 68 C10 longbed, need anything?? My parking brake doesn't work and I am missing that piece on each side so I figured that was the missing link so to speak. Thanks for the reply Todd and Fred if you have this I need one from each side shipped to 35633. And I goofed up trying to post the picture the first time. Posted via Mobile Device

02-15-2013, 08:58 AM	#16
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting a 68 C10 longbed, need anything?? Right now we don't. The brakes were all chewd up and missing parts when we got this one. I will keep an eye out for one. Thanks, Fred.

02-16-2013, 07:06 AM	#17
iregalado Registered User Join Date: Sep 2009 Location: salinas, california Posts: 26	Re: Parting a 68 C10 longbed, need anything?? How much for both the headlights, round trim around headlights (not the bezels) , brackets for headlights and all hardware to 93905 Posted via Mobile Device

02-22-2013, 11:45 PM	#20
neverstock Registered User Join Date: Jan 2009 Location: Harrah, OK Posts: 1	Re: Parting a 68 C10 longbed, need anything?? I need right rear bedside patch panel

02-16-2013, 09:57 AM	#22
Chibueno Registered User Join Date: Dec 2012 Location: Camarillo, CA Posts: 37	Re: Parting a 68 C10 longbed, need anything?? I am interested in steering gear box and power steering pump setup .brackets etc. Thanks __________________ Restoring America, one Chevy at a Time:

02-16-2013, 01:50 PM	#23
iregalado Registered User Join Date: Sep 2009 Location: salinas, california Posts: 26	Re: Parting a 68 C10 longbed, need anything?? Sounds good to me ill take them . How do i pm ? Posted via Mobile Device



Register or Log In To remove these advertisements.

02-16-2013, 03:26 PM	#24
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: Parting a 68 C10 longbed, need anything?? Now that your in the grill area....how about those turn signals...check them out and see what you think and let me know... Thanks __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel Last edited by aventur1; 02-16-2013 at 11:04 PM.

Register or Log In To remove these advertisements.