What did you do to your truck today.The 3rd chapter - Page 117 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Louisvillekytruck** · 10-10-2022, 04:09 PM

Quote:

Originally Posted by 72c20customcamper

Last body panels in high build primer . Dark grey is epoxy prime the body supply had no black and it’s been on back order for 6 weeks .Hopefully paint on Wednesday suppose to be warm enough .

The fender was much worse than I had expected . Took a lot more time just to save the triangles . I could have just worked a new one and welded these onto it

Alot of work looks great mark

**Jiggers72-GMC** · 10-07-2022, 03:36 PM

Wow Zellway, very ''cool''

....

**Johnl48** · 10-07-2022, 04:50 PM

Hanging doors

72c20customcamper · 10-07-2022, 07:22 PM

Looks great .

72c20customcamper · 10-07-2022, 07:27 PM

Grill was worse than I first thought but it’s all welded up . Didn’t get to fussy with the lower attachment area .

72c20customcamper · 10-07-2022, 07:30 PM

This part I knew about it’s the hole the po put in for the fog lamps .

**67 twins** · 10-08-2022, 05:48 AM

A simple engine swap that has turned into all new bearings and a crank from a different engine.

72c20customcamper · 10-08-2022, 01:13 PM

Installed the new Precision push on door seals . Install was super easy and the door closes fairly nice I didn’t have readjust it at all . Little slam not hard a slam but I’m sure it will crush as time goes on .I did have to cut it but a good set of metal scissors worked well , purchased from GMCPAULS .

**68bowtie** · 10-08-2022, 01:30 PM

Quote:

Originally Posted by 72c20customcamper

Installed the new Precision push on door seals . Install was super easy and the door closes fairly nice I didn’t have readjust it at all . Little slam not hard a slam but I’m sure it will crush as time goes on .I did have to cut it but a good set of metal scissors worked well , purchased from GMCPAULS .

I got the same ones, also from gmcpauls. I have to really slam hard. I guess I need to mess with adjustment.

**Already Gone** · 10-08-2022, 01:49 PM

Quote:

Originally Posted by 72c20customcamper

Installed the new Precision push on door seals . Install was super easy and the door closes fairly nice I didn’t have readjust it at all . Little slam not hard a slam but I’m sure it will crush as time goes on .I did have to cut it but a good set of metal scissors worked well , purchased from GMCPAULS .

Thanks for the post. I have the same seals and was wondering how hard/easy they might be to install. Is there adhesive behind the original seals ?

72c20customcamper · 10-08-2022, 01:58 PM

Quote:

Originally Posted by 68bowtie

I got the same ones, also from gmcpauls. I have to really slam hard. I guess I need to mess with adjustment.

It’s a firm close but not hard slam . Guess I hit it right at the sweet spot installing the door .

Quote:

Originally Posted by Already Gone

Thanks for the post. I have the same seals and was wondering how hard/easy they might be to install. Is there adhesive behind the original seals ?

Super easy to install took all of 5 minutes . I use a small rubber mallet to seat the seal . It takes a little back and forth roll to get the lip over the seam by hand then set it with the mallet . I didn’t use adhesive but there were no instructions so I winged it . I was going to use the Honda seals but they are no longer available and I wasn’t going to put used on it .

Now we shall see how the windshield goes in next week . I bought the precision rubber for that too .

**71CHEVYSHORTBED402** · 10-09-2022, 01:42 PM

]

Followed Jim's lead and installed this cover on a pretty darn nice wheel. The cover is as old as the truck its going in, 1971

**Johnl48** · 10-09-2022, 08:22 PM

Today I coated door parts with black oxide, and put on the handles and dummy filler cap

**pjmoreland** · 10-09-2022, 08:46 PM

Quote:

Originally Posted by Johnl48

Today I coated door parts with black oxide, and put on the handles and dummy filler cap

Nice!! What kind of tank are you installing?

**Johnl48** · 10-09-2022, 08:48 PM

Quote:

Originally Posted by pjmoreland

Nice!! What kind of tank are you installing?

I did the rear tank conversion from LMC

**Louisvillekytruck** · 10-10-2022, 01:33 AM

Quote:

Originally Posted by Johnl48

Today I coated door parts with black oxide, and put on the handles and dummy filler cap

Where did u get the black oxide thanks

**Johnl48** · 10-10-2022, 07:19 AM

Quote:

Originally Posted by Louisvillekytruck

Where did u get the black oxide thanks

https://caswellplating.com/black-oxide-kits.html

https://youtu.be/7vTn6l5h67A

**Louisvillekytruck** · 10-10-2022, 11:01 AM

Quote:

Originally Posted by Johnl48

https://caswellplating.com/black-oxide-kits.html

https://youtu.be/7vTn6l5h67A

John thank you. Kenny

Baker72chevy · 10-23-2022, 04:11 PM

Quote:

Originally Posted by Louisvillekytruck

Where did u get the black oxide thanks

What did you paint the parts with

72c20customcamper · 10-23-2022, 07:34 PM

Only thing I did on the truck I remembered to put the emblem before I put the fender on

eneg688 · 10-23-2022, 07:53 PM

Installed the altman easy latch kit on my 68 driver door.great kit, good instructions. Door closes easy

**Louisvillekytruck** · 10-23-2022, 10:21 PM

Quote:

Originally Posted by Baker72chevy

What did you paint the parts with

Here you go

OregonNed · 10-10-2022, 01:10 PM

This last weekend I installed one of those plate mounts to tuck the LP up - I thought it turned out really well.

Tommyups · 10-10-2022, 02:23 PM

Went shopping 😎

OregonNed · 10-12-2022, 04:26 PM

Got bored the other evening so I took a set of stainless bolts and polished them up for the perimeters of my wheel housings.

10-07-2022, 03:36 PM	#2
Jiggers72-GMC Senior Member Join Date: Mar 2021 Location: up North Posts: 541	Re: What did you do to your truck today.The 3rd chapter Wow Zellway, very ''cool'' .... __________________ Gerry, North Bay Ontario 1971 Chevy K10 short stepper, 518 med green & white 1972 GMC C1500 long box, dark Brown, owned since 1977 1969 GMC C2500 manual

10-07-2022, 04:50 PM	#3
Johnl48 Senior Member Join Date: Jun 2021 Location: West milford nj Posts: 323	Re: What did you do to your truck today.The 3rd chapter Hanging doors

10-07-2022, 07:22 PM	#4
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,175	Re: What did you do to your truck today.The 3rd chapter Looks great . __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

10-07-2022, 07:27 PM	#5
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,175	Re: What did you do to your truck today.The 3rd chapter Grill was worse than I first thought but it’s all welded up . Didn’t get to fussy with the lower attachment area . Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

10-07-2022, 07:30 PM	#6
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,175	Re: What did you do to your truck today.The 3rd chapter This part I knew about it’s the hole the po put in for the fog lamps . Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

10-08-2022, 05:48 AM	#7
67 twins Senior Member Join Date: Mar 2019 Location: Herculaneum MO (20 minutes south of St. Louis Posts: 591	Re: What did you do to your truck today.The 3rd chapter A simple engine swap that has turned into all new bearings and a crank from a different engine. Attached Images __________________ 67 C10 283 T5 swapped longbed fleetside = wife's daily driver 67 C20 292 (originally a 250)4speed longbed fleetside w/original wooden bed=my project truck 67 C10 283+.060 (so a 292 as well)T5 swapped longbed fleetside=my DD 72 C1500 Sierra Grande 350 TH350 longbed fleetside=wife's fair weather truck Can you tell we are fans of longbed fleetsides & 67s Chris

10-08-2022, 01:13 PM	#8
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,175	Re: What did you do to your truck today.The 3rd chapter Installed the new Precision push on door seals . Install was super easy and the door closes fairly nice I didn’t have readjust it at all . Little slam not hard a slam but I’m sure it will crush as time goes on .I did have to cut it but a good set of metal scissors worked well , purchased from GMCPAULS . Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

10-09-2022, 01:42 PM	#12
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,130	Re: What did you do to your truck today.The 3rd chapter ] Followed Jim's lead and installed this cover on a pretty darn nice wheel. The cover is as old as the truck its going in, 1971 Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring it from ground up. With assys, the guide accts for 1000s details such as OEM identifications& part numbers, written in short order. 700+ images include assm, illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

10-09-2022, 08:22 PM	#13
Johnl48 Senior Member Join Date: Jun 2021 Location: West milford nj Posts: 323	Re: What did you do to your truck today.The 3rd chapter Today I coated door parts with black oxide, and put on the handles and dummy filler cap

10-23-2022, 07:34 PM	#20
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,175	Re: What did you do to your truck today.The 3rd chapter Only thing I did on the truck I remembered to put the emblem before I put the fender on Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

10-23-2022, 07:53 PM	#21
eneg688 Registered User Join Date: Feb 2010 Location: orland ca. Posts: 21	Re: What did you do to your truck today.The 3rd chapter Installed the altman easy latch kit on my 68 driver door.great kit, good instructions. Door closes easy Attached Images

10-10-2022, 01:10 PM	#23
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter This last weekend I installed one of those plate mounts to tuck the LP up - I thought it turned out really well. Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

10-10-2022, 02:23 PM	#24
Tommyups Registered User Join Date: Sep 2018 Location: Dayton Oh Posts: 125	Re: What did you do to your truck today.The 3rd chapter Went shopping 😎 Attached Images

10-12-2022, 04:26 PM	#25
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter Got bored the other evening so I took a set of stainless bolts and polished them up for the perimeters of my wheel housings. Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.