|
01-07-2015, 06:45 PM | #1 |
Registered User
Join Date: Oct 2009
Location: canton ga
Posts: 12,728
|
Re: Blood Sweat and Tears.. 67 Build Thread
If no patch panel is available let me know ,I might be able to cut one of my old spares for you .
|
01-11-2015, 03:07 PM | #2 |
Senior Member
Join Date: Nov 2010
Location: Lordstown, OH / Wentzville, MO
Posts: 870
|
Re: Blood Sweat and Tears.. 67 Build Thread
What heads are those? I see they are centerbolt covers but have traditional small block intake bolts. What is it about the rockers and pushrods that are wrong? I'm probably just missing something.
|
01-11-2015, 04:42 PM | #3 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
They came on the late L98 Corvettes and on the ZZ3 crate engines. They have the angled spark plugs too. The problem is the rockers are too fat for the center bolt valve cover bolts and are rubbing on them sometimes because the guides are for 3/8" rods instead of the 5/16" rods in it causing the rockers to wonder back and forth on the valves. See how far off center the rocker is on the valve in this pic? No good...
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
01-11-2015, 05:10 PM | #4 |
Senior Member
Join Date: Nov 2010
Location: Lordstown, OH / Wentzville, MO
Posts: 870
|
Re: Blood Sweat and Tears.. 67 Build Thread
Are they required to have self aligning rockers or no?
|
01-11-2015, 05:28 PM | #5 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Dont know... I guess Ill have to try to look it up. I just figured it was the guides being way wider than the pushrods.
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
01-15-2015, 09:42 AM | #6 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
What is the area for just behind the front shocks and before the front cab mount? The drivers side looks like it has been used but nothing is there now. Also another hole was added for a clutch fork maybe?
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
01-15-2015, 10:21 PM | #7 |
Registered User
Join Date: Sep 2013
Location: Pa
Posts: 102
|
Re: Blood Sweat and Tears.. 67 Build Thread
|
01-16-2015, 01:54 PM | #8 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
01-16-2015, 03:37 PM | #9 |
Registered User
Join Date: Dec 2013
Location: Wilmot, NH
Posts: 443
|
Re: Blood Sweat and Tears.. 67 Build Thread
Looks like this!
There are rods on either side of the truck for the cable routing. Those rods have a big washer that go where that hole is.
__________________
1969 C10 SWB 5.3L LS, 4l60e, 2/4 drop (In Progress) 2015 GMC 2500 Duramax (Daily Driver) 1999 Jeep TJ 2010 Harley Street Glide Check Out My Build!: http://67-72chevytrucks.com/vboard/s...d.php?t=617981 |
01-16-2015, 06:14 PM | #10 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Boy, I was missing all sorts of stuff... Thanks for that
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
01-16-2015, 06:33 PM | #11 |
Senior Member
Join Date: Nov 2010
Location: Lordstown, OH / Wentzville, MO
Posts: 870
|
Re: Blood Sweat and Tears.. 67 Build Thread
E-brake....what's that?
Ha I bagged all my e-brake parts when I bought my truck. Didn't make sense for me to keep it if only half of it was there anyway. |
01-16-2015, 08:22 PM | #12 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Still waiting on the springs but I did get the shock re-location and longer adjustable panhard bar kit installed to see how it fit. Nice heavy brackets and all but the one that bolts to the frame for the bar is gonna get welded, I dont care for the way it bolts up. The placement of the shocks is supposed to combat wheel hop and improve ride... we'll see.
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
01-19-2015, 07:38 PM | #13 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Waiting on a quote from the blaster/powder coat guys. Now to just get all the rivets ground off and pull the frame and axle assembly apart. Im pulling all cross members and brackets off and will be remounting them all using grade 8 bolts.
Ive probably scrapped the Corvette suspension idea and will go with something made for the trucks. I have a friend that had his frame done and it cost him 1200 bucks... But Im not sure he pulled the frame apart or not. I hope mine will cost about the same. His is a square body 4x4 short bed so there will be a few less parts to do on mine. We'll see when they call.
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
01-20-2015, 01:15 PM | #14 | |
Registered User
Join Date: Dec 2013
Location: Wilmot, NH
Posts: 443
|
Re: Blood Sweat and Tears.. 67 Build Thread
Quote:
__________________
1969 C10 SWB 5.3L LS, 4l60e, 2/4 drop (In Progress) 2015 GMC 2500 Duramax (Daily Driver) 1999 Jeep TJ 2010 Harley Street Glide Check Out My Build!: http://67-72chevytrucks.com/vboard/s...d.php?t=617981 |
|
01-20-2015, 06:42 PM | #15 | |
Dan Johnston
Join Date: Sep 2010
Location: Winfield, Ks.
Posts: 4,162
|
Re: Blood Sweat and Tears.. 67 Build Thread
Quote:
__________________
Dan Johnston... Owner of My Dad's- '67 Chevy C-20 Custom Camper Short Fleetside Pickup PAPA J And our newest addition a- '71 Chevy CST/10 Short Fleetside Pickup Haulin' SOLD Papa J's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612847 Haulin's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=671130SOLD B Bears Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=744210 |
|
01-21-2015, 03:33 PM | #16 | |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Quote:
Maybe Ill rethink that then... along with a few other ideas I had. So if I replace the center cross member I should be ok by leaving all the smaller ones alone? I at least want to do one I can pass the exhaust through, or pull the original and make the slots for it in that one.
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
|
01-22-2015, 05:19 PM | #17 |
Registered User
Join Date: Jan 2015
Location: Charlotte, NC
Posts: 483
|
Re: Blood Sweat and Tears.. 67 Build Thread
going to be a fun driver
__________________
* Call me NOT the website number* Justin Novick (773) 303-8251 Sales/Support Entropy Radiator / Engineered Cooling Products "The Sexiest Radiators For The Sexiest Hot Rods" - www.EntropyRad.com www.speedcooling.com |
01-24-2015, 04:52 PM | #18 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
So far this weekend I finally pulled the motor and transmission from the frame and I hope to have the frame stripped down and ready to be blasted and powder coated.. I need a bigger garage... or a warmer environment... or both even.
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
01-31-2015, 04:08 PM | #19 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Small Update... I gots the patches done on the frame where the PO had cut and torched areas for whatever reason. Now to make the final decision on POR15 or powder coat. This is a fairly low budget build and I really would rather spend the money on parts rather than the powder coating... so Im pretty sure it will be POR15 and paint.
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
01-31-2015, 07:01 PM | #20 | |
Registered User
Join Date: Dec 2013
Location: Wilmot, NH
Posts: 443
|
Re: Blood Sweat and Tears.. 67 Build Thread
Quote:
__________________
1969 C10 SWB 5.3L LS, 4l60e, 2/4 drop (In Progress) 2015 GMC 2500 Duramax (Daily Driver) 1999 Jeep TJ 2010 Harley Street Glide Check Out My Build!: http://67-72chevytrucks.com/vboard/s...d.php?t=617981 |
|
02-08-2015, 12:48 PM | #21 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Well, the frame is now coated in 2 coats of the Master Coatings Sealer. Just taking a break for a few hours and going back out for the satin black AG111 top coat with the hardener to finish this part of the restoration up.
Does anyone know anything about what the numbers mean stamped in the rails?
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
02-08-2015, 01:19 PM | #22 |
Registered User
Join Date: Dec 2013
Location: Wilmot, NH
Posts: 443
|
Re: Blood Sweat and Tears.. 67 Build Thread
Frame looks awesome man. It's all the up hill slide from here.
__________________
1969 C10 SWB 5.3L LS, 4l60e, 2/4 drop (In Progress) 2015 GMC 2500 Duramax (Daily Driver) 1999 Jeep TJ 2010 Harley Street Glide Check Out My Build!: http://67-72chevytrucks.com/vboard/s...d.php?t=617981 |
02-08-2015, 07:03 PM | #23 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Frames done... Just gotta get the rest of the suspension parts Im re-using and the rear end and trail arms done and I can start putting stuff together to get it to a roller so I can roll it outside and get to the engine and body stuff. This was a big step and by not just sending it out to be blasted was quite the job. But I dont have anything to haul with and my time never lines up with my friends who have trucks or with places I could have taken it to... so
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
02-08-2015, 10:24 PM | #24 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Blood Sweat and Tears.. 67 Build Thread
I so know what your talking about with getting enough friends over at the same time to help! The frame looks great!
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
02-08-2015, 10:37 PM | #25 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Its not really that I cant get enough friends to come and help.. its more of I have friends that dont know squat about cars and trucks and just dont give a flip about them lol. This is pretty much a solo adventure. I was talking about the friend or two I have that have trucks that could haul big stuff for me. Sucks either way. Oh.. and Thanks
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
Bookmarks |
|
|