Roushinator's 72 C10 Stepside Restore/Build - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**roushinator** · 04-13-2018, 10:00 PM

Quote:

Originally Posted by knomadd

Looks good Ryan! Might I suggest trying to run the injector and throttle body section of the harness under the intake? That might help conceal it a bit. Just a thought though.

Yeah i'm going to do that. I am taking the intake off to get a Ceramic clear coating. So when i get that back i will do that.

Trackman101 · 04-12-2018, 11:50 PM

None of my business but I would suggest using a Y and distribute fuel equally to both rails.
If your pump is not up to the task the last couple cylinders might get thirsty.

knomadd · 04-13-2018, 09:46 AM

Quote:

Originally Posted by Trackman101

None of my business but I would suggest using a Y and distribute fuel equally to both rails.
If your pump is not up to the task the last couple cylinders might get thirsty.

That would only change the location of which cylinders are thirsty, as you say. If the pump isn't up to the task, the pump would need to be changed.

**roushinator** · 04-13-2018, 10:02 PM

Quote:

Originally Posted by knomadd

That would only change the location of which cylinders are thirsty, as you say. If the pump isn't up to the task, the pump would need to be changed.

I have a Boyd Welding tank with a In-Tank Aeromotive Stealth 340 Pump. I will double check to see if it good enough.

**roushinator** · 04-15-2018, 08:48 PM

A little more progress....

**Hart_Rod** · 04-15-2018, 09:02 PM

Looks great Ryan!

**roushinator** · 04-16-2018, 10:13 PM

Quote:

Originally Posted by Hart_Rod

Looks great Ryan!

THanks!!

**roushinator** · 04-20-2018, 08:43 PM

A little more work done..

Got my steps primed* and had my radiator core support painted.

will69camaro · 04-28-2018, 08:34 AM

Awesome build!

That pump should be plenty for that setup.

As you said no need to change the fuel line routing. Mine deadheads same way and is a TT LSx427 making 1000+ (I have bigger pump obviously).

**roushinator** · 04-29-2018, 09:11 PM

Trying to get a little work done on either my truck, car or garage organization. Here is wht i did today...

Here are the custom badges. Dont know if this will be the final location. Going to wait until the fenders are on the truck before deciding.

will69camaro · 04-29-2018, 09:14 PM

Maybe this has been answered, but I'll ask again cause i didn't see it. What radiator and fans are you running? Looking for something for a similar build in my C10 (LY6/6L90e planned). Want to be sure it'll stay cool towing!

**roushinator** · 04-29-2018, 09:33 PM

Quote:

Originally Posted by will69camaro

Maybe this has been answered, but I'll ask again cause i didn't see it. What radiator and fans are you running? Looking for something for a similar build in my C10 (LY6/6L90e planned). Want to be sure it'll stay cool towing!

It's an Entropy radiator.

https://www.entropyrad.com/1967-1972...uck-radiators/

will69camaro · 04-29-2018, 09:39 PM

Excellent thanks. I've been looking at cheap (champion) and more expensive C&R. Just trying to figure out my costs for swapping.

1enick72 · 06-02-2018, 12:15 PM

I like the radiator mounts and brackets. Nice work on everything.

cornerstone · 06-02-2018, 09:50 PM

Any updates?

**roushinator** · 08-25-2019, 10:35 AM

Here is some progress pics of the current one..

**roushinator** · 08-25-2019, 10:32 AM

Got rid of my cab and opted for another one.....

KMC3420 · 08-25-2019, 11:00 AM

Cab is looking excellent. Is that Nsane doing the cab work?

**roushinator** · 08-25-2019, 11:19 AM

Quote:

Originally Posted by KMC3420

Cab is looking excellent. Is that Nsane doing the cab work?

Thanks. Yes.

**roushinator** · 08-30-2019, 10:37 AM

Getting Closer...

KMC3420 · 08-30-2019, 03:59 PM

Quote:

Originally Posted by roushinator

Getting Closer...

Better than new! It will be nice to not have to tweak anything but adjusting your doors and fenders going back on.

Snake72 · 09-03-2019, 03:58 PM

Wow, they did a great job on the metal work, cab looks fantastic

siggyfreud · 09-04-2019, 05:23 PM

Looking great. That motor looks MEAN AF. Can't wait to see this build progress!

**roushinator** · 09-04-2019, 07:43 PM

Here's the latest...

**1971Stepside** · 09-05-2019, 10:51 AM

I didn't weld my latches in. Was there any adjustments you had to make for them to work? They look really good welded in. Why did I have to see this the day after I put primer on my doors

04-12-2018, 11:50 PM	#2
Trackman101 Registered User Join Date: Jul 2015 Location: Alberta Posts: 161	Re: Roushinator's 72 C10 Stepside Restore/Build None of my business but I would suggest using a Y and distribute fuel equally to both rails. If your pump is not up to the task the last couple cylinders might get thirsty.

04-15-2018, 08:48 PM	#5
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build A little more progress.... __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

04-15-2018, 09:02 PM	#6
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,835	Re: Roushinator's 72 C10 Stepside Restore/Build Looks great Ryan! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-20-2018, 08:43 PM	#8
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build A little more work done.. Got my steps primed* and had my radiator core support painted. __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

04-28-2018, 08:34 AM	#9
will69camaro Registered User Join Date: Feb 2012 Location: Houston, TX Posts: 24	Re: Roushinator's 72 C10 Stepside Restore/Build Awesome build! That pump should be plenty for that setup. As you said no need to change the fuel line routing. Mine deadheads same way and is a TT LSx427 making 1000+ (I have bigger pump obviously). __________________ 1969 Camaro - Protouring build, 427 LSX TT 1969 C10 - Cruiser build in progress

04-29-2018, 09:11 PM	#10
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Trying to get a little work done on either my truck, car or garage organization. Here is wht i did today... Here are the custom badges. Dont know if this will be the final location. Going to wait until the fenders are on the truck before deciding. __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

04-29-2018, 09:14 PM	#11
will69camaro Registered User Join Date: Feb 2012 Location: Houston, TX Posts: 24	Re: Roushinator's 72 C10 Stepside Restore/Build Maybe this has been answered, but I'll ask again cause i didn't see it. What radiator and fans are you running? Looking for something for a similar build in my C10 (LY6/6L90e planned). Want to be sure it'll stay cool towing! __________________ 1969 Camaro - Protouring build, 427 LSX TT 1969 C10 - Cruiser build in progress

04-29-2018, 09:39 PM	#13
will69camaro Registered User Join Date: Feb 2012 Location: Houston, TX Posts: 24	Re: Roushinator's 72 C10 Stepside Restore/Build Excellent thanks. I've been looking at cheap (champion) and more expensive C&R. Just trying to figure out my costs for swapping. __________________ 1969 Camaro - Protouring build, 427 LSX TT 1969 C10 - Cruiser build in progress

06-02-2018, 12:15 PM	#14
1enick72 Registered User Join Date: Jun 2010 Location: Jackson, ME Posts: 287	Re: Roushinator's 72 C10 Stepside Restore/Build I like the radiator mounts and brackets. Nice work on everything. __________________ 65 short step edited by staff

06-02-2018, 09:50 PM	#15
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: Roushinator's 72 C10 Stepside Restore/Build Any updates?

08-25-2019, 10:35 AM	#16
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Here is some progress pics of the current one.. __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

08-25-2019, 10:32 AM	#17
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Got rid of my cab and opted for another one..... __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

08-25-2019, 11:00 AM	#18
KMC3420 Registered User Join Date: Dec 2012 Location: Harrison, AR Posts: 1,069	Re: Roushinator's 72 C10 Stepside Restore/Build Cab is looking excellent. Is that Nsane doing the cab work? __________________ Keagan 68 SWB C-10 original 350 A/C 503 Mean Green

08-30-2019, 10:37 AM	#20
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Getting Closer... __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

09-03-2019, 03:58 PM	#22
Snake72 Registered User Join Date: Jan 2017 Location: Iowa Posts: 239	Re: Roushinator's 72 C10 Stepside Restore/Build Wow, they did a great job on the metal work, cab looks fantastic



Register or Log In To remove these advertisements.

09-04-2019, 05:23 PM	#23
siggyfreud Registered User Join Date: Jun 2012 Location: Portland Posts: 1,330	Re: Roushinator's 72 C10 Stepside Restore/Build Looking great. That motor looks MEAN AF. Can't wait to see this build progress! __________________ Current Build - Project "Ghost of Poseidon" 72 C10 Pro-touring build Previous Build - 66 GMC Pro-touring build. Sold.

09-04-2019, 07:43 PM	#24
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Here's the latest... __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

09-05-2019, 10:51 AM	#25
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Re: Roushinator's 72 C10 Stepside Restore/Build I didn't weld my latches in. Was there any adjustments you had to make for them to work? They look really good welded in. Why did I have to see this the day after I put primer on my doors __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

Register or Log In To remove these advertisements.