K/5 Jack Location? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 01-18-2005, 09:28 AM

Where is the factory jack located in your K/5?

JayDubBlazer · 01-18-2005, 10:49 AM

right behind the driver seat I think. Well everything except the jack. I only assume that it was once there because the tire iron was there.

3 on the tree · 01-18-2005, 10:58 AM

Geeem posted some pics under the optional seat thread that show my rig with the jack with the spare tire mount behind the rear seat. There is a seperate spring similar to the tire iron spring back there to hold the jack.

**special-K** · 01-20-2005, 09:08 AM

I was being sarcastic.Every time I`d check for more input on the single seat thing,there was something about the jack location.I figured I`d start a thread about jack location hoping to get info on the single seat.

*Gee_Emm* · 01-20-2005, 10:25 AM

Yah that thread kinda got out of hand, I tired to split the jack posts off into a different thread but some of the post also had to do with your original question and jack location so if I were to split it up it would have turned it into a bigger mess.

**special-K** · 01-21-2005, 02:13 AM

Yeah well...Lots of good info,to say the least.Guess it`s all inter-related.

**pound41** · 01-21-2005, 08:16 AM

Sorry about that fellows I kind of started that. I had never seen the single seat option before. When I saw the tire carrier behind the seat I knew that there had to be a away that the jack and everything could be mounted behind the drivers seat. Since I know that mine was. In all the years of jack threads I finally found someone who also had there jack there. Meathead95 with the single seat option. Sorry again

**special-K** · 01-21-2005, 08:49 AM

Like I said,lots of good info there.My sarcasm is purely humor.I`m a wise guy sometimes,that`s all.Sorry

**pound41** · 01-21-2005, 10:18 AM

No offense taken I knew when I did it. It would take a life of its own. We have had numerious threads on "The Jack" just felt bad destroying your thread.

Huck · 01-21-2005, 10:25 AM

Still would be nice to see an original instruction sheet form a Blazer---. We will find one eventually.

01-18-2005, 09:28 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	K/5 Jack Location? Where is the factory jack located in your K/5? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-18-2005, 10:49 AM	#2
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	right behind the driver seat I think. Well everything except the jack. I only assume that it was once there because the tire iron was there. __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

01-20-2005, 09:08 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	I was being sarcastic.Every time I`d check for more input on the single seat thing,there was something about the jack location.I figured I`d start a thread about jack location hoping to get info on the single seat. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-21-2005, 02:13 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Yeah well...Lots of good info,to say the least.Guess it`s all inter-related. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-21-2005, 08:49 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Like I said,lots of good info there.My sarcasm is purely humor.I`m a wise guy sometimes,that`s all.Sorry __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-18-2005, 10:58 AM	#3
3 on the tree Registered User Join Date: Oct 2004 Posts: 393	Geeem posted some pics under the optional seat thread that show my rig with the jack with the spare tire mount behind the rear seat. There is a seperate spring similar to the tire iron spring back there to hold the jack.

01-20-2005, 10:25 AM	#5
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Yah that thread kinda got out of hand, I tired to split the jack posts off into a different thread but some of the post also had to do with your original question and jack location so if I were to split it up it would have turned it into a bigger mess.

01-21-2005, 08:16 AM	#7
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,269	Sorry about that fellows I kind of started that. I had never seen the single seat option before. When I saw the tire carrier behind the seat I knew that there had to be a away that the jack and everything could be mounted behind the drivers seat. Since I know that mine was. In all the years of jack threads I finally found someone who also had there jack there. Meathead95 with the single seat option. Sorry again

01-21-2005, 10:18 AM	#9
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,269	No offense taken I knew when I did it. It would take a life of its own. We have had numerious threads on "The Jack" just felt bad destroying your thread.

01-21-2005, 10:25 AM	#10
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Still would be nice to see an original instruction sheet form a Blazer---. We will find one eventually.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.