Suburban rwal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kwmech** · 11-13-2023, 02:49 PM

So I upgraded axles and brakes on my 91 Suburban to a full float 14 bolt rear and a Dana 60 front. The front axle got a conversion to 3/4 ton rotors. Still have the 1/2 calipers on it. Have a 3/4 ton master (not installed yet). Issue is a spongy pedal and I'm leaning towards the RWAL dump valve not working quite right. NO bleeder on the valve. I previously had issues on my other Suburban with the same issue. I am considering removing/bypassing the dump valve. Yes everything is adjusted correctly and have bled the system thoroughly. Any thoughts?

11-13-2023, 02:49 PM	#1
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,403	Suburban rwal So I upgraded axles and brakes on my 91 Suburban to a full float 14 bolt rear and a Dana 60 front. The front axle got a conversion to 3/4 ton rotors. Still have the 1/2 calipers on it. Have a 3/4 ton master (not installed yet). Issue is a spongy pedal and I'm leaning towards the RWAL dump valve not working quite right. NO bleeder on the valve. I previously had issues on my other Suburban with the same issue. I am considering removing/bypassing the dump valve. Yes everything is adjusted correctly and have bled the system thoroughly. Any thoughts?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.