Going to school sale, '67 and '72 partout!

[botboy]

Hey guys I just bought a blazer to take to school and a friend just made me an offer I couldn't refuse on the built engine I had in my '72 so parts gotta move, plus I need a new tranny for the blazer. Everythings in Delano, about 30 mins west of minneapolis

SOLD PARTS
manual clutch/brake pedal assys $55 shipped ea - Flatblackclassic
'72 C10 title & vin plate $35 Shipped - Nightmare
'83 blazer steering wheel (stock) no cracks $30 shipped w/silverado button
TH350, tilt column, HEI & vent door $295 - Swanny


Dibsed parts:
3.07 rear end open coil spring - swanny
New pair of rear coil springs $105 shipped (130 new) still have paint on them - swanny
'72 front clip w/disk brakes, good pads & brake MC and vacuum booster - Guff
1 clutch/flywheel/pressure plate assy's $30 + SH ea - 1969 4x4

Without further ado:

DRIVETRAIN
SM420 2WD $105 (shifts good, complete incl tranny, top, yoke, shifter, knob, bellhousing, driveshaft if you want it) pick it up
3 Bellhousings $25 ea + SH
1 clutch/flywheel/pressure plate assy's $30 + SH ea
1 manual clutch/brake pedal assys $55 shipped ea
5.14 eaton rear open leaf spring $65 pick it up (will throw in springs, frame section, driveshaft if you want and help load)
'67 SM420 driveshaft/yoke $30 pick it up
T221 T-case (empty) $10 + SH or pick up
T221 T-case access cover $10 shipped (blasted and primed)
2 throttle pedal Assy's 1 cable $30 Shipped 1 rod $25 shipped
PS setup from '72 $110 Shipped (new hose, good hose, box, pump, pulley, bracket)

ENGINE BAY
67-72 Window wash reservoir $15 shipped w/cap
3 67-72 window wash reservoir bracket $6 shipped ea
2 Windshield wiper motor 67-72 $25 shipped both work great
'72 heater core and surrounding plastic and fan $60 Shipped

FRAME/XMEMBER/MOUNTS
shock plates for rear coils $25 shipped pr
2 good rear trailing arms $35 ea pick it up or can ship
V8 auto xmember $40 + SH
I6 Manual xmember $40 + SH (claimed already)
V8 2WD engine mounts $25 + SH
I6 250 2WD engine mounts $25 + SH
'72C10 Frame (bare) $1 you pick up
'67C30 Dually Frame (bare) $1 you pick up
'72 Rad support nice shape $55 pick it up
Battery tray - some rust not rotted out $35 shipped
Battery tray - some rot $15 shipped (good sides - good for repair)

SHEETMETAL
'72 driver condition pr of doors (DS has speaker hole cut) black outside need paint, good glass and regulators (non-power) $75/pr pick up
Metal 67-70 door panels no armrest style $45 shipped pr
3 67-72 cowl panels $10 apeice + SH
'69-72 hood with fiberglass cobra style scoop (needs paint) $45 pick it up
'72 driver condition grille assy (headlight doors, inner and outer - inner has cracks but everything still there, outer has a couple small dents, doors good) $85 shipped
'67 front sheet metal (front grille, inners, headlight doors, support in pretty good shape couple small easily fixable dents no thru rust) $90 + SH
Smoothed non-AC 67-72 dash no gauges (radio indent shaved out) orange needs paint over smoothed areas incl glovebox $80 pick it up
Uncut '67 dash $45 pick it up non-AC
LWB Front panel, needs a couple bolt holes repaired no rot $25 + SH

CLIMATE CONTROL
'67 heater box non-ac $50 shipped
'72 heater box non-ac $50 shipped
'71 climate controls good knobs and levers $35 shipped
'67 climate controls good knobs and levers dirty $25 shipped

ELECTRICAL
Non-tach '72 dash w/sunpro shift light tach installed (low profile version) $80 shipped
'67 non-tach dash $30 shipped
Fiberglass "tune trapper" stealth tuned am/fm antennae $35 shipped (new never installed - fiberglass coat won't rust, good for boats or rods)
'72 front lighting harness $15 shipped
'67 front lighting harness $15 shipped
'67 engine harness (I6) $12 shipped
'72 engine harness V8 (a little hacked up) $8 shipped
'72 horn $12 shipped
'67 horn $12 shipped
'83 horns $18 shipped

WHEELS
4 centerline style rims in pretty good shape, nice tires, 5 lug, 15" $175 pick set up I'll throw in a 5 lug ralley with a good matching spare

INTERIOR
Pr buick seats in '72, one rip on PS shoulder (would be easy to stitch, on flat spot by shoulder, accidentally whacked with knife), no belts, red, nice and cushy $50/pr pick up

EMBLEMS
'83 chevy blazer emblems (K5, silverado) from fenders and back quarters $30 shipped set nice shape



More up later. Pics as requested. I'm willing to drop prices for multiple item purchases. I'm currently in ames IA away from home in delano so I can bring stuff down and meet you here on/near campus if you like, or I can meet you to get stuff when I'm in minnesota. Buy stuff and it will get shipped either the weekend of the 27th or over labor day weekend depending on when I get payment (I'll be back in minnesota on those dates). Will trade or even pay money for good '81-87 doors, front fenders, and grille (4 headlight) or phantom grille for my '83 blazer and for heads, turbo, injection pump and other parts from a 6.5 TD engine, a vacuum pump for 6.2/6.5 with tach sensor, a 1600+ CC VW engine (type 1/2) or Type IV VW engine

[nightmare]

i'll take the vin plate and title. do you have the one for the 67 too?

[botboy]

Originally Posted by nightmare

i'll take the vin plate and title. do you have the one for the 67 too?

I do not have the title but I may be able to get it for the '67, if the PO can find it. How would you like to pay? I have a premier paypal account (botboy60@hotmail.com) otherwise I can take a MO to:
Kris Schneider
10056 Cty. Rd 16 SE
Delano MN 55328

[donkey69]

I know, I know..... Its not on the list,but how about a rt front fender??

[ScottH]

Interested in selling the new coils? front or rear?

[PICKMUP]

That is a great deal on that PS, if it is tight. Someone should jump on that. It will cost you at least $50 to ship it!...and it is a bear to pack so it doesn't leak or break the box.

[ScottH]

PM sent

[botboy]

I've had to ship some awfully big things so it won't be a problem. The box has given me no problems and is really responsive, especially with the tires I have on the truck currently.

The new coils are on the rear and I will sell them separate, $100 shipped (cost me $130 + gas new to get them locally). Front coils aren't too bad either, not new but work good, make me an offer.

Rt (I assume you mean DS) fender is FS, has a small slice in it where the bumper got pushed into it and cut it, nothing a little bondo or a good welder won't fix. $10 and its yours if you come get it.

[donkey69]

Botboy-sorry was'nt more clear on the fender....I meant passenger side not DS! Let me know,thanks!

[ScottH]

Sent pm on ps setup.

[botboy]

Originally Posted by donkey69

Botboy-sorry was'nt more clear on the fender....I meant passenger side not DS! Let me know,thanks!

Same thing. Got the truck someone had whacked the PS, and then a friend of mine was leaving another friends house and whacked the DS (but I got the satisfaction of seeing her jetta really get F***ed up....). Same price.

[ScottH]

Batboy, is the Power steering setup still available? If so please send some pics to me at SDELVY55@aol.com

Thanks.

[flatblackclassic]

How much for a manual clutch/brake pedal assy shipped to 75077. E-mail me please at Kaoskustoms@gmail.com

[botboy]

Corrected price on clutch/brake assy and a bunch more items added. Will have pics for you tomorow on PS setup

[donkey69]

Might be interested in 72 doors also-when and where? Let me know! Thanks.

[botboy]

Originally Posted by donkey69

Might be interested in 72 doors also-when and where? Let me know! Thanks.

Currently located in Delano, MN. DS door has a speaker hole (6x9) cut into the bottom front. Both have good glass, regulators that work good, and door handles, as well as the '72 decorated style door panels and armrests (DS one is torn up tho). ones currently on the truck need paint and have good mirrors. I also have another I'll throw in, bright orange PS, no windows or panel or handle. All have small pinholes in the bottoms but nothing major. All latching mechanisms work fine, don't have keys for the handles but do have a brand new set of tumblers/keys I'll also throw in (cost me $18). Give me a call and leave your name and number on the answering machine or with a family member if I'm not there. We'll figure out a time and place from there.

Kris 952-955-1977

[ryanroo]

put me in line for the P/S stuff as well thanks
Ryan

[donkey69]

........sent you a pm

[botboy]

Ttt

[Pont]

Can I get a pic of the 67 heater controls? Better yet, is it silver or black? If black, I'm interested.

Rob
pont1@rvi.net

[ScottH]

Botboy, still waiting for the pics on the PS setup. No hurry my end, just don't want to forget about it.

Scott

[botboy]

bump. Next date I'll be up in MN to ship stuff will be the 27th, reserve stuff/pay now, get it in a little over a week.

[botboy]

Upagain. Looks like the auto conversion setup, tilt column and all is sold, will have the definite word on that this weekend. I also have an AC AFR gauge for $50 Shipped (even has a needle - not digital!) 3 HEI's (45 shipped each) and 2 HEI coils (w/HEI $55 shipped each). Or take all the HEI's, both coils, and the AFR gauge for $200 shipped to the continental US or $220 USD to canada/alaska/hawaii

[botboy]

Pont, I'll be taking more pictures while home this weekend of both the climate controls for the '67 and the nice one I got for my '72. I'll email them to you at that time, but until then I'm stuck in Ames with no parts trucks and no digicam.

[Joey-D]

I need a bellhousing for a sm465, is that the bellhousings you have? If so let me know. My computer is broken and I on my folks, so if you could please call me at 314-226-6420 it would be greatly appreciated. If you don't have long distance, I can call you right back.