WTB: Running 6 Cylinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Zumo · 01-25-2005, 05:06 PM

Are there any out there?

Putter · 01-25-2005, 06:21 PM

If you don't find one in the desired timeframe, mine will be coming out in the next couple of weeks to make room for the small block. Because Luv2xlr8 has sold the black parts truck, he shouldn't need it any more. I will let you get the motor and the saginaw three speed really cheap!! Oh, mine is a 250, with the stock single barrel Rochester, and the sediment bowl fuel filter. I had pics posted at one time, but can't find them now. The clutch is pretty much on it's last leg, so I will not be waiting long to pull it out. I'll take $100 for it, or I will also be very willing to do some trading if you would rather go that route. Just let me know if you are interested.

LUV2XCLR8 · 01-25-2005, 06:35 PM

Quote:

Originally Posted by Putter

Because Luv2xlr8 has sold the black parts truck, he shouldn't need it any more.

YUP

Harold Shepard · 01-25-2005, 07:10 PM

I have one for $75 if you want to come get it in NC.

Tx Firefighter · 01-25-2005, 07:28 PM

Zumo, I've got an inline 250 runner in Azle.

Complete top to bottom.

PM me if you're interested.

SCOTI · 01-25-2005, 08:06 PM

I have a running 250 w/HEI (coil in cap type) & complete exhaust. Has 3spd connected w/floor shifter. Clutch is bad but the engine starts right up. Has 30psi oil pressure cold.... 10-15psi hot. This little motor ran great for a few legs of the power tour a couple of years ago (Tulsa through OKC & back to Dallas). It's old & dirty, but solid. Other than that, it's mostly been driven around town as a daily driver & used for pulling my trailer.

I even have a fresh tune-up pkg for it (new plugs, cap, rotor) still in the bag. I never got around to installing it after the clutch puked.

$200 for everything. PM if it sounds interesting.

Scot

SCOTI · 01-26-2005, 09:15 PM

ttt

Blue_71 · 01-26-2005, 09:39 PM

i have a complete rebuilt one for $350 obo, new bearings, rings gaskets, has HEI

Blue Beard · 01-26-2005, 09:59 PM

I have a spare 250 sitting here on the engine stand.....come and get it. I got it for free.

01-25-2005, 05:06 PM	#1
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	WTB: Running 6 Cylinder Are there any out there? __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

01-25-2005, 06:21 PM	#2
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	If you don't find one in the desired timeframe, mine will be coming out in the next couple of weeks to make room for the small block. Because Luv2xlr8 has sold the black parts truck, he shouldn't need it any more. I will let you get the motor and the saginaw three speed really cheap!! Oh, mine is a 250, with the stock single barrel Rochester, and the sediment bowl fuel filter. I had pics posted at one time, but can't find them now. The clutch is pretty much on it's last leg, so I will not be waiting long to pull it out. I'll take $100 for it, or I will also be very willing to do some trading if you would rather go that route. Just let me know if you are interested. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 01-26-2005 at 09:57 AM.

01-25-2005, 07:28 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Zumo, I've got an inline 250 runner in Azle. Complete top to bottom. PM me if you're interested. __________________ I'm on the Instagram- @Gearhead_Kevin

01-25-2005, 08:06 PM	#6
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,919	I have a running 250 w/HEI (coil in cap type) & complete exhaust. Has 3spd connected w/floor shifter. Clutch is bad but the engine starts right up. Has 30psi oil pressure cold.... 10-15psi hot. This little motor ran great for a few legs of the power tour a couple of years ago (Tulsa through OKC & back to Dallas). It's old & dirty, but solid. Other than that, it's mostly been driven around town as a daily driver & used for pulling my trailer. I even have a fresh tune-up pkg for it (new plugs, cap, rotor) still in the bag. I never got around to installing it after the clutch puked. $200 for everything. PM if it sounds interesting. Scot __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 01-25-2005 at 08:08 PM.

01-26-2005, 09:15 PM	#7
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,919	ttt __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-25-2005, 07:10 PM	#4
Harold Shepard Registered User Join Date: May 2004 Location: Canton North Carolina Posts: 466	I have one for $75 if you want to come get it in NC.

01-26-2005, 09:59 PM	#9
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	I have a spare 250 sitting here on the engine stand.....come and get it. I got it for free. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.