50 ½ ton on s-10 chassis- dirt cheap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 02-03-2005, 12:08 AM

PRICE IS 500 BUCKS, VERY FIRM

Truck is on an 84 s-10 chassis. Just like you see people asking about. The wheelbase is correct, and the suspension and brakes are better than any stock stuff ever could be.

Chassis has new ball joints and idler arm.

Sheetmetal is super, super good. This truck is not rotted out. It has a small rust hole in one cab corner, that's it. Sheetmetal is a 7 or 8 on 1-10 scale. Better than any other original AD truck I've ever seen.

Wheels and tires shown do not go with it, but I will put some rollers on it to get you onto the trailer.

I have a correct 1950 Texas title for it too.

I will not ship it. I will not deliver it. I will help you load it onto the trailer.

Tx Firefighter · 02-03-2005, 12:13 AM

crews · 02-03-2005, 02:28 AM

PM sent....

mkmiller1 · 02-03-2005, 08:20 PM

WOW! I've never seen an AD with such little rust(wish my '51 were that clean). Does the hood have any pitting in it? That is the only piece that I wouldn't have for it if it were.

Thanks,
Matthew

mkmiller1 · 02-03-2005, 08:23 PM

Also, How are the rear fenders? Spare cutout? Runningboards?

Matthew

Tx Firefighter · 02-03-2005, 09:12 PM

The sheetmetal just has surface rust on it.

I have the running boards and all of that.

The fender does not have the tire cutout in it.

rambler · 02-04-2005, 01:40 PM

If it is not sold to the first two.. please put me in line, I could not pick up till mid March if that is OK?

mkmiller1 · 02-04-2005, 10:51 PM

Tx firefighter- Could you snap a pic from the drivers side door looking at the pass side kick panel area(including the cut area for the tranny)? Are the rear fenders as rust free as the front ones? I was also wondering how long you might be able to hold it if paid in full?

Thanks,
Matthew

Tx Firefighter · 02-05-2005, 06:52 PM

I'll get the pics day after tomorrow for you.

If paid in full, I could sit on it awhile.

redneck_motorsports · 02-06-2005, 11:36 AM

I'm close and I have cash. Let me know if you need a buyer.

Catfish

Tx Firefighter · 02-06-2005, 12:47 PM

Quote:

Originally Posted by redneck_motorsports

I'm close and I have cash. Let me know if you need a buyer.

Catfish

I work Sunday and Wednesday this week. Let's get going.

I'll have pics for the other guy tomorrow too. I need this truck sold.

3100 special · 02-06-2005, 01:00 PM

Definitely a nice project truck. Dang good figure being asked. I wouldn't budge either. Outstanding condition from what I can see.
I just put my gauges on my site this morning. They would fit perfectly if the buyer doesn't want to go with newer aftermarket gauges (like I'm going to do in mine).
Good luck, I bet it will turn quick!
Jon

rambler · 02-07-2005, 11:41 AM

I dont want to step on Matthew or Crews.. since contacted you first,, but if they pass,, let me know.. would like to see the other pics as well.. I can send payment, if you can hold till I pick up.. let me know thanks!

Tx Firefighter · 02-07-2005, 04:39 PM

Rambler, I plugged you into line.

No one freak out if I'm not on here for a couple of days. We're right in the middle of moving right now.

Tx Firefighter · 02-08-2005, 08:06 PM

Guys, I can't find the title anywhere. It's not in my file where I keep titles or anyplace else either.

If it's a deal breaker, I understand completely. Just let me know and I'll strike your name off of the list.

I'm very sorry.

redneck_motorsports · 02-08-2005, 08:40 PM

Quote:

Originally Posted by Tx Firefighter

Guys, I can't find the title anywhere. It's not in my file where I keep titles or anyplace else either.

If it's a deal breaker, I understand completely. Just let me know and I'll strike your name off of the list.

I'm very sorry.

I'm still interested.... PM sent.

crews · 02-08-2005, 09:37 PM

Sorry but that puts me out.

Thanks for the honesty though....it would have been cool to have two of them with their original titles.

Tx Firefighter · 02-08-2005, 10:00 PM

The truck is sold. Thanks for the replies fellows.

LeftEar55 · 02-17-2005, 09:36 PM

I know it's sold, but do you know what year S-10 frame was used? Short bed S10, I'm assuming as well? I may want to do this to my 55 1st, if it's not too terribly complicated?

Tx Firefighter · 02-18-2005, 08:01 AM

I used an 84 S10 longbed, regaular cab chassis.

If you join the HAMB and look around over there, a guy names Clark did a real good FAQ article on this swap. Lots of pictures and details.

02-03-2005, 12:08 AM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	50 ½ ton on s-10 chassis- dirt cheap PRICE IS 500 BUCKS, VERY FIRM Truck is on an 84 s-10 chassis. Just like you see people asking about. The wheelbase is correct, and the suspension and brakes are better than any stock stuff ever could be. Chassis has new ball joints and idler arm. Sheetmetal is super, super good. This truck is not rotted out. It has a small rust hole in one cab corner, that's it. Sheetmetal is a 7 or 8 on 1-10 scale. Better than any other original AD truck I've ever seen. Wheels and tires shown do not go with it, but I will put some rollers on it to get you onto the trailer. I have a correct 1950 Texas title for it too. I will not ship it. I will not deliver it. I will help you load it onto the trailer. __________________ I'm on the Instagram- @Gearhead_Kevin

02-03-2005, 12:13 AM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	__________________ I'm on the Instagram- @Gearhead_Kevin

02-03-2005, 02:28 AM	#3
crews It just doesn't matter Join Date: Apr 2001 Location: Huntington Beach, Ca Posts: 1,660	PM sent.... __________________ 05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!!

02-03-2005, 08:20 PM	#4
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	WOW! I've never seen an AD with such little rust(wish my '51 were that clean). Does the hood have any pitting in it? That is the only piece that I wouldn't have for it if it were. Thanks, Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

02-03-2005, 08:23 PM	#5
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	Also, How are the rear fenders? Spare cutout? Runningboards? Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

02-03-2005, 09:12 PM	#6
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	The sheetmetal just has surface rust on it. I have the running boards and all of that. The fender does not have the tire cutout in it. __________________ I'm on the Instagram- @Gearhead_Kevin

02-04-2005, 01:40 PM	#7
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	If it is not sold to the first two.. please put me in line, I could not pick up till mid March if that is OK? __________________ No matter where you are..... There you are... Buckaroo Banzi

02-04-2005, 10:51 PM	#8
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	Tx firefighter- Could you snap a pic from the drivers side door looking at the pass side kick panel area(including the cut area for the tranny)? Are the rear fenders as rust free as the front ones? I was also wondering how long you might be able to hold it if paid in full? Thanks, Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

02-05-2005, 06:52 PM	#9
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I'll get the pics day after tomorrow for you. If paid in full, I could sit on it awhile. __________________ I'm on the Instagram- @Gearhead_Kevin

02-06-2005, 11:36 AM	#10
redneck_motorsports Registered User Join Date: Dec 2003 Location: Pampa Texas Posts: 36	I'm close and I have cash. Let me know if you need a buyer. Catfish

02-06-2005, 01:00 PM	#12
3100 special Street Rod Dreamin' Join Date: Feb 2004 Location: Work:Batam, Indonesia/ Home:League City, Texas Posts: 1,243	Definitely a nice project truck. Dang good figure being asked. I wouldn't budge either. Outstanding condition from what I can see. I just put my gauges on my site this morning. They would fit perfectly if the buyer doesn't want to go with newer aftermarket gauges (like I'm going to do in mine). Good luck, I bet it will turn quick! Jon __________________ 1954 Chevy 3100 Panel Truck 2004 GMC Yukon 2007 GMC Sierra 4X4 "I am for doing good to the poor, but I differ in opinion of the means. I think the best way of doing good to the poor, is not making them easy in poverty, but leading or driving them out of it." Benjamin Franklin, On the Price of Corn and Management of the Poor, November 1776 Last edited by 3100 special; 02-06-2005 at 01:04 PM.

02-07-2005, 11:41 AM	#13
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	I dont want to step on Matthew or Crews.. since contacted you first,, but if they pass,, let me know.. would like to see the other pics as well.. I can send payment, if you can hold till I pick up.. let me know thanks! __________________ No matter where you are..... There you are... Buckaroo Banzi

02-07-2005, 04:39 PM	#14
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Rambler, I plugged you into line. No one freak out if I'm not on here for a couple of days. We're right in the middle of moving right now. __________________ I'm on the Instagram- @Gearhead_Kevin

02-08-2005, 08:06 PM	#15
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Guys, I can't find the title anywhere. It's not in my file where I keep titles or anyplace else either. If it's a deal breaker, I understand completely. Just let me know and I'll strike your name off of the list. I'm very sorry. __________________ I'm on the Instagram- @Gearhead_Kevin

02-08-2005, 09:37 PM	#17
crews It just doesn't matter Join Date: Apr 2001 Location: Huntington Beach, Ca Posts: 1,660	Sorry but that puts me out. Thanks for the honesty though....it would have been cool to have two of them with their original titles. __________________ 05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!!



Register or Log In To remove these advertisements.

02-08-2005, 10:00 PM	#18
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	The truck is sold. Thanks for the replies fellows. __________________ I'm on the Instagram- @Gearhead_Kevin

02-17-2005, 09:36 PM	#19
LeftEar55 Registered User Join Date: Feb 2005 Location: Huntsville, Alabama Posts: 107	I know it's sold, but do you know what year S-10 frame was used? Short bed S10, I'm assuming as well? I may want to do this to my 55 1st, if it's not too terribly complicated?

02-18-2005, 08:01 AM	#20
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I used an 84 S10 longbed, regaular cab chassis. If you join the HAMB and look around over there, a guy names Clark did a real good FAQ article on this swap. Lots of pictures and details. __________________ I'm on the Instagram- @Gearhead_Kevin

Register or Log In To remove these advertisements.