Are these 67-72 ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

olblue60@aol.com · 03-23-2005, 09:15 AM

Are these 67-72 ? Thanks!

John

http://cgi.ebay.com/ebaymotors/ws/eB...tem=4537979115

vtblazer · 03-23-2005, 09:28 AM

Console is but I thought the pass. flip handle was shorter/smaller on the 67-72 seats.

*Gee_Emm* · 03-23-2005, 10:07 AM

They should bolt up fine, maybe they are from a panel truck or something????

donkey69 · 03-23-2005, 10:26 AM

Those look exactly like some I had in a 76 Blazer....the seat back and like VT said-the flip handle. Looks like they might have been recovered sometime in their life too.

**CPNE** · 03-23-2005, 11:08 AM

73-77. Remember, the seat belt style console was used up thru 76-77. Brackets are too tall and won't work in a 67-72 without mods.

**pound41** · 03-23-2005, 11:16 AM

I think those are 73/74 seats very close to 72 in style but slightly different brackets I believe are higher as was said

**CPNE** · 03-23-2005, 11:47 AM

Want proof, check out this 73 GMC brochure...look familiar? Same pattern as on the ebay seats and lookie there, not a cup console!

Huck · 03-23-2005, 12:00 PM

Also, some of the 73+ buckets have a shorter skirted side frame that don't allow for a correct 69-72 bucket cover to fit properly so consider that impact as well.

Blazer1970 · 03-23-2005, 07:18 PM

Also, '69 - '72 had a blue bowtie on the console. Yellow is '73 and up.

*Gee_Emm* · 03-23-2005, 07:44 PM

I just finshed painting my brackets, the drivers side brackets look identical to 69-72's, the passenger side back bracket looks identical, they only thing that doesnt look the same are the front tilt brackets on the passenger. Did the 73+ seats use the same backs? I always passed by the newer Blazers in the junkyard thinking the seats were different.

olblue60@aol.com · 03-23-2005, 07:53 PM

Thanks for the good help. I was considering bidding but they didnt look quite right. I knew I could count on the experts here on the this site.

John

olblue60@aol.com · 03-23-2005, 08:10 PM

Just went to the auction. OOOOPPPPS! Musta bid last night. It was late, Brain F#%t.
Hope I get outbid

03-23-2005, 09:15 AM	#1
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Are these 67-72 ? Are these 67-72 ? Thanks! John http://cgi.ebay.com/ebaymotors/ws/eB...tem=4537979115 __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

03-23-2005, 10:26 AM	#4
donkey69 JB-80 &quot;Twice as Good&quot; Join Date: Jun 2004 Location: Central, MN Posts: 354	Those look exactly like some I had in a 76 Blazer....the seat back and like VT said-the flip handle. Looks like they might have been recovered sometime in their life too. __________________ HEY NOW!

03-23-2005, 11:08 AM	#5
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	73-77. Remember, the seat belt style console was used up thru 76-77. Brackets are too tall and won't work in a 67-72 without mods. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-23-2005, 11:47 AM	#7
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Want proof, check out this 73 GMC brochure...look familiar? Same pattern as on the ebay seats and lookie there, not a cup console! Attached Images __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-23-2005, 07:18 PM	#9
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,510	Also, '69 - '72 had a blue bowtie on the console. Yellow is '73 and up. __________________ Tim

03-23-2005, 09:28 AM	#2
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Console is but I thought the pass. flip handle was shorter/smaller on the 67-72 seats.

03-23-2005, 10:07 AM	#3
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	They should bolt up fine, maybe they are from a panel truck or something????

03-23-2005, 11:16 AM	#6
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,269	I think those are 73/74 seats very close to 72 in style but slightly different brackets I believe are higher as was said

03-23-2005, 12:00 PM	#8
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Also, some of the 73+ buckets have a shorter skirted side frame that don't allow for a correct 69-72 bucket cover to fit properly so consider that impact as well.

03-23-2005, 07:44 PM	#10
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	I just finshed painting my brackets, the drivers side brackets look identical to 69-72's, the passenger side back bracket looks identical, they only thing that doesnt look the same are the front tilt brackets on the passenger. Did the 73+ seats use the same backs? I always passed by the newer Blazers in the junkyard thinking the seats were different.

03-23-2005, 07:53 PM	#11
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Thanks for the good help. I was considering bidding but they didnt look quite right. I knew I could count on the experts here on the this site. John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

03-23-2005, 08:10 PM	#12
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Just went to the auction. OOOOPPPPS! Musta bid last night. It was late, Brain F#%t. Hope I get outbid __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.