Cool '69 Longhorn Ad - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 10-14-2005, 10:08 PM

Found it...had to have it...LOL!

chevy_fatman · 10-14-2005, 10:27 PM

You've got the ad, now you only need the truck

Longhorn Man · 10-14-2005, 10:38 PM

Mike...can you hook me up...yet again?
I'll have to dig all mine out of storage and return the favor.

stllookn · 10-15-2005, 01:35 AM

Andy, You got it. Sorry I did not respond earlier...doing an Andy on the 400...clean and paint. I will pull the heads to see if it needs rings but hoping I can paint it and install it. Wouldn't a set of Vortecs, a cam and an intake add a little life to that motor...LOL! Send me your email again.

Best Regards,

Mike

Longhorn Man · 10-15-2005, 06:11 AM

pulling an andy....oh man now they named it after me.

Sent.

68C15 · 10-15-2005, 08:14 AM

where do you find these sales brochures? I would like to decorate my "room" with the like.

for the record the difference between a rattle can rebuild & an Andy Engine is the first one will last for at least 3 weeks & handle 3000 RPM. LOL (JK Andy)

stllookn · 10-15-2005, 11:19 AM

I'm going for the high performance build, using ceramic high temp engine paint...I expect to get at least 6 wk and 6,000 rpm!

If I tell you where I am finding these I will probably never get another one for $3.00...LOL! PM sent.

**FRENCHBLUE72** · 10-15-2005, 11:40 AM

Kool looking ad I have a few of them but none with longhorns on em..

Longhorn Man · 10-16-2005, 10:49 AM

Mine lasted one day ... get it right.

72 longhorn BB · 10-20-2005, 03:15 PM

Awesome ad. I think I have an old Longhorn sales brochure I can scan and put up.

67ChevyRedneck · 10-20-2005, 03:23 PM

I have 5 or six ads for 67 trucks. They are cool. Only paid about 30 bucks for all of them, but it will probably cost over 100 to frame em all.... so they sit in my closet.

Longhorn Man · 10-20-2005, 04:14 PM

Quote:

Originally Posted by 72 longhorn BB

Awesome ad. I think I have an old Longhorn sales brochure I can scan and put up.

Any chance you can e-mail me a hi-res copy of it?
When i do the chainge over on the longhorn website, I plan on a page of longhorn adds. I also print them out and one day will have eleventy billion 40 year old adds to hang on my walls.

Longhorn Man · 10-20-2005, 04:15 PM

Quote:

Originally Posted by 67ChevyRedneck

I have 5 or six ads for 67 trucks. They are cool. Only paid about 30 bucks for all of them, but it will probably cost over 100 to frame em all.... so they sit in my closet.

Any chance you could send me some Hi-res pics of yours too?
Maybe we should just have a place to post all of the adds we all have.
That would be real cool, but lots of bandwith though.

67ChevyRedneck · 10-20-2005, 05:06 PM

I'll try Andy. Probably won't be till early next week. Need to borrow my GF's digicam. I think I have 4 or 5 67's (cause my truck is a 67) and a 68, I also have 2 or 3 for 58 apaches (my other "project" I haven't touched in YEARS)

55chevy · 10-20-2005, 09:28 PM

I have several from Life mags, as well as all kind of cars. Unfortunately in a move oil was spilled on some of them, discolored in couple corners.

**truckdude239** · 10-20-2005, 09:35 PM

longhorn i new to the group but i am wondering why they call it an andy?and what lasted an day? lol i want to know now lol

Longhorn Man · 10-20-2005, 09:39 PM

Well, first the semi obviouse... I am Andy.

On my longhorn, I spent many moons installing a caddilac 425 big block while trying to not spend any money on it. (hence...the many moons part) Anyways, once I finally got rid of the real problem (wife) my truck was up and running in no time (comparitivly). I drove it home from the shop on sunday morning....blew the engine on the way top work on Monday, and cried untill the following monday.

chevy_fatman · 10-20-2005, 11:16 PM

Quote:

Originally Posted by Longhorn Man

....blew the engine on the way top work on Monday, and cried untill the following monday.

LMAO on the "pulling an Andy"

stllookn · 10-21-2005, 01:19 AM

truckdude, ROFLMAO...forever after an "Andy" will be the code for a rebuild with a can of Krylon!!!!! But it has to be really good Krylon...the high temp kind!!!!!

55chevy, Get a rope! Seriously...high res copies would be cool! I am going for an ad from each year Longhorn. When we talk Longhorn Man into getting the site up we are really going to make it tell a story.

Longhorn Man · 10-21-2005, 05:10 AM

hey hey hey now...I'm gettin to it.

10-14-2005, 10:08 PM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Cool '69 Longhorn Ad Found it...had to have it...LOL! Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-14-2005, 10:27 PM	#2
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	You've got the ad, now you only need the truck __________________ Paul How do you make the invisible, visible?.........You take it away.

10-15-2005, 01:35 AM	#4
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Andy, You got it. Sorry I did not respond earlier...doing an Andy on the 400...clean and paint. I will pull the heads to see if it needs rings but hoping I can paint it and install it. Wouldn't a set of Vortecs, a cam and an intake add a little life to that motor...LOL! Send me your email again. Best Regards, Mike __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-15-2005, 08:14 AM	#6
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	where do you find these sales brochures? I would like to decorate my "room" with the like. for the record the difference between a rattle can rebuild & an Andy Engine is the first one will last for at least 3 weeks & handle 3000 RPM. LOL (JK Andy) __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card Last edited by 68C15; 10-15-2005 at 08:17 AM.

10-15-2005, 11:19 AM	#7
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	I'm going for the high performance build, using ceramic high temp engine paint...I expect to get at least 6 wk and 6,000 rpm! If I tell you where I am finding these I will probably never get another one for $3.00...LOL! PM sent. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-14-2005, 10:38 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Mike...can you hook me up...yet again? I'll have to dig all mine out of storage and return the favor.

10-15-2005, 06:11 AM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	pulling an andy....oh man now they named it after me. Sent.

10-15-2005, 11:40 AM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Kool looking ad I have a few of them but none with longhorns on em.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-16-2005, 10:49 AM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Cool '69 Longhorn Ad Mine lasted one day ... get it right.

10-20-2005, 03:15 PM	#10
72 longhorn BB Registered User Join Date: Jan 2000 Location: Michigan Posts: 312	Re: Cool '69 Longhorn Ad Awesome ad. I think I have an old Longhorn sales brochure I can scan and put up. __________________ Chuck 1972 C-20 Longhorn 402 BB .030" over (409?), curved HEI, RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit 1999 K1500 Suburban (old style) 5.7L Vortec 4L60E "No matter where you go, ........ there you are"

10-20-2005, 03:23 PM	#11
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Cool '69 Longhorn Ad I have 5 or six ads for 67 trucks. They are cool. Only paid about 30 bucks for all of them, but it will probably cost over 100 to frame em all.... so they sit in my closet. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

10-20-2005, 05:06 PM	#14
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Cool '69 Longhorn Ad I'll try Andy. Probably won't be till early next week. Need to borrow my GF's digicam. I think I have 4 or 5 67's (cause my truck is a 67) and a 68, I also have 2 or 3 for 58 apaches (my other "project" I haven't touched in YEARS) __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

10-20-2005, 09:28 PM	#15
55chevy Car Truck Bike Nut Join Date: Aug 2005 Location: Suffolk Virginia Posts: 850	Re: Cool '69 Longhorn Ad I have several from Life mags, as well as all kind of cars. Unfortunately in a move oil was spilled on some of them, discolored in couple corners. __________________ Snow free Florida panhandle, don't miss Indiana winters Temp in Suffolk Virginia, Sentenced 2 to 5 years LOL 68 shortfleet project 94 3500 TD dually so many cars so little time 72 K2 CST 2WD Blazer

10-20-2005, 09:35 PM	#16
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,217	Re: Cool '69 Longhorn Ad longhorn i new to the group but i am wondering why they call it an andy?and what lasted an day? lol i want to know now lol

10-20-2005, 09:39 PM	#17
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Cool '69 Longhorn Ad Well, first the semi obviouse... I am Andy. On my longhorn, I spent many moons installing a caddilac 425 big block while trying to not spend any money on it. (hence...the many moons part) Anyways, once I finally got rid of the real problem (wife) my truck was up and running in no time (comparitivly). I drove it home from the shop on sunday morning....blew the engine on the way top work on Monday, and cried untill the following monday.



Register or Log In To remove these advertisements.

10-21-2005, 01:19 AM	#19
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Cool '69 Longhorn Ad truckdude, ROFLMAO...forever after an "Andy" will be the code for a rebuild with a can of Krylon!!!!! But it has to be really good Krylon...the high temp kind!!!!! 55chevy, Get a rope! Seriously...high res copies would be cool! I am going for an ad from each year Longhorn. When we talk Longhorn Man into getting the site up we are really going to make it tell a story. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-21-2005, 05:10 AM	#20
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Cool '69 Longhorn Ad hey hey hey now...I'm gettin to it.

Register or Log In To remove these advertisements.