69 or 72 crew - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rancid · 09-16-2006, 09:47 PM

well heres my collection of good parts that now makes up a 72 3/4 ton and my 69 cab. so now i got to decide if i want my crewcab as a 69 or a 72. but atleast i have most of the parts to start this project. cant wait to start chopping.

this when all though a long bed now should end up with a 5ft-2in bed when cabs are joined and suburban door parts and roof parts are added.

**special-K** · 09-16-2006, 09:55 PM

You sound like me.I have all this stuff and so many ways to go.When you build from scratch,you just pick a year from what parts you have(and what titles you have for the registered year).I can`t wait to see some cutting,either.

rancid · 09-20-2006, 09:03 PM

well got my 2nd cab a 69 here and cut the front out and cut the back out of the 72 cab and got it on the frame . and streched the wheelbase 23 inches so far may adjust it once the cab is done and i start fitting the bed. it just looked goofy with the tires almost against the cab. heres some pics of where im at, going to get suburban front doors still and sqaure up the rear doors. and get some sheet metal bent up for the pillars between the doors and roof bent up to close up the cab next. and im also going to do a little more trimming to get both the doors closer together.

CPNEJR · 09-20-2006, 09:14 PM

that thing looks like it's gonna be awesome!

chevy_fatman · 09-24-2006, 02:49 PM

That's a great project! gonna look bad when is done, keep us updated!

rancid · 09-24-2006, 10:27 PM

well i was going to use a suburban door post and roof area to complete the connection between both cabs, but there will be a lager gap between the doors , so i will have to modify it anyway. so i decided to cut an area where the roof, rain gutter and the jamb area, as a sample. so i could have a 56 inch long prebent pieces done and join the roof and gutter area. then once thats done i will have the vertical jamb area bent for it. so i will have the pieces on tuesday.

LUV2XCLR8 · 09-24-2006, 10:49 PM

Quote:

Originally Posted by chevy_fatman

That's a great project! gonna look bad when is done, keep us updated!

rancid · 10-07-2006, 07:49 PM

well i got my bent up peices of metal back 3 different bends where done and i got 2 of each and to fab up the jamb area and i will fab up the vertical one next.monday i got 2 71 buckets and a center console for 75 bucks even though there in grey tweed , and scored up all three suburban doors and an auto tilt column for 100 bucks last night, im only using the rear door for the sqaured post area on the truck rear doors. so still need another suburban rear door wing window. but i think it will work out pretty good.

rancid · 10-07-2006, 07:51 PM

try again.

timcos · 10-07-2006, 08:03 PM

Where are you in Utah?

Cheers,

Tim

rancid · 10-07-2006, 08:29 PM

im in riverton.

rancid · 10-07-2006, 08:31 PM

.
well i hope this goes well, first time doing anything like this. i guess we all need to learn.

**Palf70Step** · 10-07-2006, 08:38 PM

Truck looks like it is going to turn out real nice. I like the way you ar going at things with it.

I tried and fixed a few of your photobucket links. Got most of them to work for you.

timcos · 10-07-2006, 08:39 PM

If you need help...I am only about 20 minutes away. I can lend a steady hand and an inquisitive mind.

Cheers,

Tim

rancid · 10-07-2006, 08:49 PM

rancid · 10-07-2006, 09:03 PM

having pic problems.

rancid · 10-07-2006, 10:19 PM

Quote:

Originally Posted by timcos

If you need help...I am only about 20 minutes away. I can lend a steady hand and an inquisitive mind.

Cheers,

Tim

cool, i may need a hand im still learng alot of this. i normally do solid axle conversion and work allot on newer trucks. and im finding sheet metal is not as forgiving as box tube and 1/4 inch plate. and i have alot of metal to replace and add in on the giant floor of this thing.

chevy_fatman · 10-08-2006, 01:03 AM

Looking good!! keep up the good work man!

**Hart_Rod** · 10-08-2006, 11:15 AM

Nice project. Here are some pics of mine:

rancid · 10-08-2006, 12:15 PM

could you get more pics of all the middle door jamb areas inside and out. and what parts where used to build that 4 door, modified suburban rear doors or truck doors.

**Hart_Rod** · 10-08-2006, 01:14 PM

Mine has 4 full size truck doors. Rokcrwln built one using the suburban rear doors for the back doors.

http://67-72chevytrucks.com/vboard/s...d.php?t=188993

These are the best pics I have until I pick the truck up. Try this link also:

http://67-72chevytrucks.com/vboard/s...53#post1757553

**Hart_Rod** · 10-08-2006, 01:18 PM

How about some inside pics? Are you making it a shortbed?

CAL 58 GMC · 10-08-2006, 02:55 PM

Nice work rancid!

Aarons72s · 10-08-2006, 03:37 PM

I want one!

Aaron

rancid · 10-08-2006, 04:09 PM

was a long bed, but im going to use this bed. it will be cut down i think about 20 or more inches from the front of the bed and pretty much bob the back of the bed. i did move the spring hangers about 17 inches back.
and thanks for the pics, just trying to get an idea how to finish the vertical jamb.

09-16-2006, 09:47 PM	#1
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	69 or 72 crew well heres my collection of good parts that now makes up a 72 3/4 ton and my 69 cab. so now i got to decide if i want my crewcab as a 69 or a 72. but atleast i have most of the parts to start this project. cant wait to start chopping. this when all though a long bed now should end up with a 5ft-2in bed when cabs are joined and suburban door parts and roof parts are added.

09-16-2006, 09:55 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 69 or 72 crew You sound like me.I have all this stuff and so many ways to go.When you build from scratch,you just pick a year from what parts you have(and what titles you have for the registered year).I can`t wait to see some cutting,either. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-20-2006, 09:03 PM	#3
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: 69 or 72 crew well got my 2nd cab a 69 here and cut the front out and cut the back out of the 72 cab and got it on the frame . and streched the wheelbase 23 inches so far may adjust it once the cab is done and i start fitting the bed. it just looked goofy with the tires almost against the cab. heres some pics of where im at, going to get suburban front doors still and sqaure up the rear doors. and get some sheet metal bent up for the pillars between the doors and roof bent up to close up the cab next. and im also going to do a little more trimming to get both the doors closer together.

09-20-2006, 09:14 PM	#4
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Re: 69 or 72 crew that thing looks like it's gonna be awesome! __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

09-24-2006, 02:49 PM	#5
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	Re: 69 or 72 crew That's a great project! gonna look bad when is done, keep us updated! __________________ Paul How do you make the invisible, visible?.........You take it away.

09-24-2006, 10:27 PM	#6
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: 69 or 72 crew well i was going to use a suburban door post and roof area to complete the connection between both cabs, but there will be a lager gap between the doors , so i will have to modify it anyway. so i decided to cut an area where the roof, rain gutter and the jamb area, as a sample. so i could have a 56 inch long prebent pieces done and join the roof and gutter area. then once thats done i will have the vertical jamb area bent for it. so i will have the pieces on tuesday.

10-07-2006, 07:49 PM	#8
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: 69 or 72 crew well i got my bent up peices of metal back 3 different bends where done and i got 2 of each and to fab up the jamb area and i will fab up the vertical one next.monday i got 2 71 buckets and a center console for 75 bucks even though there in grey tweed , and scored up all three suburban doors and an auto tilt column for 100 bucks last night, im only using the rear door for the sqaured post area on the truck rear doors. so still need another suburban rear door wing window. but i think it will work out pretty good.

10-07-2006, 07:51 PM	#9
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: 69 or 72 crew try again. Last edited by Palf70Step; 10-07-2006 at 08:36 PM.

10-07-2006, 08:03 PM	#10
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: 69 or 72 crew Where are you in Utah? Cheers, Tim __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004)

10-07-2006, 08:29 PM	#11
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: 69 or 72 crew im in riverton. Last edited by Palf70Step; 10-07-2006 at 08:31 PM.

10-07-2006, 08:31 PM	#12
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: 69 or 72 crew . well i hope this goes well, first time doing anything like this. i guess we all need to learn.

10-07-2006, 08:38 PM	#13
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,725	Re: 69 or 72 crew Truck looks like it is going to turn out real nice. I like the way you ar going at things with it. I tried and fixed a few of your photobucket links. Got most of them to work for you. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-07-2006, 08:39 PM	#14
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: 69 or 72 crew If you need help...I am only about 20 minutes away. I can lend a steady hand and an inquisitive mind. Cheers, Tim __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004)

10-07-2006, 08:49 PM	#15
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: 69 or 72 crew

10-07-2006, 09:03 PM	#16
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: 69 or 72 crew having pic problems.



Register or Log In To remove these advertisements.

10-08-2006, 01:03 AM	#18
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	Re: 69 or 72 crew Looking good!! keep up the good work man! __________________ Paul How do you make the invisible, visible?.........You take it away.

10-08-2006, 11:15 AM	#19
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,835	Re: 69 or 72 crew Nice project. Here are some pics of mine: Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

10-08-2006, 12:15 PM	#20
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: 69 or 72 crew could you get more pics of all the middle door jamb areas inside and out. and what parts where used to build that 4 door, modified suburban rear doors or truck doors.

10-08-2006, 01:14 PM	#21
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,835	Re: 69 or 72 crew Mine has 4 full size truck doors. Rokcrwln built one using the suburban rear doors for the back doors. http://67-72chevytrucks.com/vboard/s...d.php?t=188993 These are the best pics I have until I pick the truck up. Try this link also: http://67-72chevytrucks.com/vboard/s...53#post1757553 Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 10-08-2006 at 01:16 PM.

10-08-2006, 01:18 PM	#22
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,835	Re: 69 or 72 crew How about some inside pics? Are you making it a shortbed? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

10-08-2006, 02:55 PM	#23
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: 69 or 72 crew Nice work rancid! __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

10-08-2006, 03:37 PM	#24
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,670	Re: 69 or 72 crew I want one! Aaron

10-08-2006, 04:09 PM	#25
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: 69 or 72 crew was a long bed, but im going to use this bed. it will be cut down i think about 20 or more inches from the front of the bed and pretty much bob the back of the bed. i did move the spring hangers about 17 inches back. and thanks for the pics, just trying to get an idea how to finish the vertical jamb.

Register or Log In To remove these advertisements.