Got some crappy news today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 05-11-2007, 05:40 PM

Well, as some of you know I've been having some problems with my truck shaking a bunch. Both U-Joints seem to be okay, so i went with the balancing the wheels route. When I got the tire shop to pick them up they told me my passenger side wheel was bent. So I need to find another wheel. It's a 20x8 Eagle 212. I posted a WTB ad in the parts section.

Bamm · 05-11-2007, 06:23 PM

Beyond repair?

**special-K** · 05-11-2007, 06:50 PM

Dang,that sucks.Are they still made?I wonder if a wheel repair place can fix it.

ratrod67 · 05-11-2007, 06:57 PM

I had those wheels but they were 18's on a 67 camaro. You could practically kick them and bend them. I had mine fixed 3 different times by a place called Wheels America in Dallas. Mine were bent enough you could see it across the street. If you can't really see yours it should fix easily. Cost $108 each time to fix.

JameslovesJammie · 05-11-2007, 11:04 PM

Do you have full truck pictures with those rims mounted? Those are sharp!

*72CSTC5* · 05-11-2007, 11:35 PM

have it repaired. Check with any of your local bodyshops and they can point you in the right direction. Most wheel recon shops charge around 100.00 dollars and offer 24 hour turn around service.

GREASEMONKEY72 · 05-11-2007, 11:40 PM

i dont see why you need a new wheel when you should be able to have that one fixed like the others said, goodluck with it

5150 · 05-11-2007, 11:45 PM

Thanks for the ideas guys, I'll check into it.

Here's a pic of the truck

GREASEMONKEY72 · 05-12-2007, 02:24 AM

nice stepper, i like the flames

LUV2XCLR8 · 05-12-2007, 04:53 AM

Brian,

Is it near the top in the 1st pic at about the 1 o'clock position?

If so I 2 also think that can be salvaged

JAKES 68GMC · 05-12-2007, 09:41 AM

Time for some Torque Thrust's!

Thats too bad your wheel is bent, hopefully you can find another one or get that one fixed.

jsbgump · 05-12-2007, 11:24 AM

I would also think you could get it fixed

5150 · 05-12-2007, 01:15 PM

Craig, that pic is from Maggie last year. That's the driver's front wheel. The one that is bent is the pass front.

Driver177 · 05-12-2007, 02:04 PM

There is a place in Williamsport Maryland that specializes in this type of thing.. they do classic wheel restoration.. I'll get the number for you.. or look them up in the web..it's called WheelTech.

5150 · 05-12-2007, 11:46 PM

thanks for the info

68C15 · 05-13-2007, 12:08 AM

are they cast or forged?
I for one would be afraid of a repaired aluminum wheel.

05-11-2007, 05:40 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Got some crappy news today Well, as some of you know I've been having some problems with my truck shaking a bunch. Both U-Joints seem to be okay, so i went with the balancing the wheels route. When I got the tire shop to pick them up they told me my passenger side wheel was bent. So I need to find another wheel. It's a 20x8 Eagle 212. I posted a WTB ad in the parts section. Attached Images __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-11-2007, 06:23 PM	#2
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Re: Got some crappy news today Beyond repair? __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

05-11-2007, 06:50 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Got some crappy news today Dang,that sucks.Are they still made?I wonder if a wheel repair place can fix it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-11-2007, 06:57 PM	#4
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,270	Re: Got some crappy news today I had those wheels but they were 18's on a 67 camaro. You could practically kick them and bend them. I had mine fixed 3 different times by a place called Wheels America in Dallas. Mine were bent enough you could see it across the street. If you can't really see yours it should fix easily. Cost $108 each time to fix.

05-11-2007, 11:04 PM	#5
JameslovesJammie God Bless Mr. T Join Date: Apr 2004 Location: Minot, ND Posts: 348	Re: Got some crappy news today Do you have full truck pictures with those rims mounted? Those are sharp! __________________ Like a midget at a urinal...sometimes you must stay on your toes.

05-11-2007, 11:35 PM	#6
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: Got some crappy news today have it repaired. Check with any of your local bodyshops and they can point you in the right direction. Most wheel recon shops charge around 100.00 dollars and offer 24 hour turn around service.

05-11-2007, 11:40 PM	#7
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Got some crappy news today i dont see why you need a new wheel when you should be able to have that one fixed like the others said, goodluck with it __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

05-11-2007, 11:45 PM	#8
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Got some crappy news today Thanks for the ideas guys, I'll check into it. Here's a pic of the truck Attached Images __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-12-2007, 02:24 AM	#9
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Got some crappy news today nice stepper, i like the flames __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

05-12-2007, 04:53 AM	#10
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,474	Re: Got some crappy news today Brian, Is it near the top in the 1st pic at about the 1 o'clock position? If so I 2 also think that can be salvaged __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-12-2007, 09:41 AM	#11
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,212	Re: Got some crappy news today Time for some Torque Thrust's! Thats too bad your wheel is bent, hopefully you can find another one or get that one fixed. Last edited by JAKES 68GMC; 05-12-2007 at 09:42 AM.

05-12-2007, 11:24 AM	#12
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Got some crappy news today I would also think you could get it fixed __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

05-12-2007, 01:15 PM	#13
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Got some crappy news today Craig, that pic is from Maggie last year. That's the driver's front wheel. The one that is bent is the pass front. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-12-2007, 02:04 PM	#14
Driver177 Registered User Join Date: May 2007 Location: Hagerstown Maryland Posts: 55	Re: Got some crappy news today There is a place in Williamsport Maryland that specializes in this type of thing.. they do classic wheel restoration.. I'll get the number for you.. or look them up in the web..it's called WheelTech. __________________ 67 Chevy C-10 original (except the wheels) Two wrongs don't make a right..BUT ....three lefts does!

05-12-2007, 11:46 PM	#15
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Got some crappy news today thanks for the info __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4



Register or Log In To remove these advertisements.

05-13-2007, 12:08 AM	#16
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: Got some crappy news today are they cast or forged? I for one would be afraid of a repaired aluminum wheel.

Register or Log In To remove these advertisements.