The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board


Thread Tools Display Modes
Old 04-29-2002, 08:26 AM   #1
Registered User
MikeB's Avatar
Join Date: Jul 2000
Location: Plano, TX
Posts: 1,454
Post Kenny's Truck Parts

Ran into these guys a few years ago at a swap meet in Dallas. It's a family business out of Oklahoma. Their on-line prices are competitive, but their swap meet prices are dirt cheap AND I don't have to pay tax or shipping. Got a complete Fleetside rear bumper kit from them, including even the license plate lamp, for $190. The bumper is imported, but has very nice chrome -- triple plated and no imperfections. Also got a new instrument bezel for $35 - yeah, the same thing that others sell for as much as $75! If you ever attend the Arlington, TX swap meet (held 5 times/year), check them out. You will probably be dealing with Kenny or his wife.

69 C-10 Fleetside, mild 383, Dart Iron Eagle heads, Crane Energizer 266 cam and 1.6 roller rockers, Edelbrock Performer manifold and 600cfm carb, HEI w/ MSD components, 1986 front spindles/disc brakes, Vintage Air in-dash.
82 C10 Custom Deluxe SWB -- original paint, 355/TH350, Vortec heads, GM RamJet 350 roller cam
69 C10 LWB -- Bought in 1989, now my son's
Semi-retired, working part time at a classic car repair shop
Member since 2000. This is the very first car or truck forum I joined!
MikeB is offline   Reply With Quote
Old 04-29-2002, 09:39 AM   #2
Senior Member
HuggerCST's Avatar
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,493

Yea, I bought some parts from them at the pate swap meet this weekend. Got a deal on a new taigate band. $100. Bought that rear bumper kit too. Great prices.
70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, cruise, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, posi, shoulder belts, 2.5"/4" drop, 17" Torq thrust 2s.
Build thread
53 Chevy shortbed
69 Camaro

Click here to subscribe
Chevy GMC International Truck Club Louisiana Charter Member
HuggerCST is offline   Reply With Quote
Old 04-29-2002, 10:19 AM   #3
Do it well or don't do it
guitarman's Avatar
Join Date: Apr 2002
Location: Georgia
Posts: 457

I got a gauge dash with all the whistles and bells for cheaper than any where else. I got it back in December and never tried to install it until about 3 weeks ago and there was a problem with the oil gauge. I called and they sent me another right away. Very honest and decent people.

Try to be the person your dog thinks you are.

Excellent paint and body site:

Visit my Web Site
guitarman is offline   Reply With Quote
Old 04-29-2002, 01:16 PM   #4
Wiseass secured himself a BAN
67Fleetsidedream's Avatar
Join Date: Nov 2000
Location: MOON!!!
Posts: 2,282

I talk to Kenny at one of the swap meets that goes to every year. He is a very nice guy. Their prices are awsome and the shipping is fast. They are very customer oriented. I have bought the majority of my parts through them. I HIGHLY recommend them.
67Fleetsidedream is offline   Reply With Quote
Old 04-29-2002, 06:38 PM   #5
Eddie H.
Registered User
Eddie H.'s Avatar
Join Date: Mar 2001
Location: Paradise TX USA
Posts: 1,068
Thumbs up

Kenny is the best.
I've been dealing with him for many years and
never had a problem yet. He's at every major swap meet in the D/FW area.
That's who I buy 99 percent of my truck parts from.

69 GMC LWB 404/400 daily driver
71 GMC LWB 350/700R4 frame-up restoration in progress
"Negative people always seem to have a problem for every solution"
Eddie H. is online now   Reply With Quote
Old 04-29-2002, 06:43 PM   #6
Car Knocker
jay6891's Avatar
Join Date: May 2001
Location: jefferson,arkansas
Posts: 664

Saw him at the Super Chevy in Memphis. Prices were real good. Only most of the stuff I need wouldn't fit in my wifes car. Got his cataloge and check him out because he is closer to me. The parts I bought from WES and Mothertrucker were the same as he had at the show.

68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion. ZR-1 roll pan, filled tailights.Parts bought but not installed>> 1985 front disc suppension, ford 9" posi with disc.Cab corners,foor boards,rockers, cab braces, Phatom grill. Steel Horse leather seats with console. My wife is gonna kill me.
68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.
jay6891 is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 03:22 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
Copyright 1997-2013