Parting '69 C20 chassis NW Missouri

[jeffspower]

It's time to get rid of what's left from doing my body swap. I'll list the key items, if you need something else you see, just ask. All prices DO NOT include shipping. I ship by UPS, USPS or Fedx. Please reply within this post.

The tranny, rear 3rd member & shafts, intake & carb, alt. mount, starter and wheels/ tires are spoken for.

SOLD- Z bar & linkage.

SOLD- front frame horns.

SOLD -Grille. Complete as pictured. All new from LMC (not long ago according to PO). Still has an LMC sticker on the plastic insert. A few small scratches on the upper & lower driver's side corner. The upper scratches should clean up. New park light lenses too. $275

SOLD -Front bumper. Super straight. One very small hole drilled in the top lip (centered). $50

-Rear bumper. It's a nice design that is shaped around the bedside ends. Minor rust starting thru on the lower left lip. Other rust not shown on the bottom side ball mount area. Some drilled holes and the extra plate welded accross the lic. plate area. $40

-Seat. Has the "covered forever" look. $75

-Inner/ outer tie rod assemblies. $10 each. Everything in this front end is tight, ask if you need something else.

-Shocks. Look pretty new. $10 for the front set, $20 for the rear set.

-350 engine. I believe it to be original. Shows 94,xxx miles, and was told that's correct. No blowby or smoke, but the two center exhaust valves are sinking. Should be a 4 bolt. .You can have everything except what I stated is spoken for. $200 I pull it, $150 if you do it yourself. I have a hoist.

-Radiator. I have 2 of them. $25 each.

I was told the brakes are new- who knows what that really means. If you are interested in drums/ etc, ask & I will pull them to have a look.

[jeffspower]

More pics

[jeffspower]

More pics

[DREW67]

What part Mo. are you in?

[kingsolver72]

I might be interested in the grille.How far are you from K.C.?
Shipping to 66067?

[BLAZERMAN]

Jeff, I'll take the grille, I can pick it up or if your coming into town I can meet you somewhere.

[BLAZERMAN]

I guess I should have typed a little faster, I'll step in line behind Kingsolver.

[kingsolver72]

No problem Rob,I will step aside.It looks like you are closer to Jeffspower.I don't need one right away.

[jeffspower]

I'm in Easton, Mo. about 10 miles east of Saint Joseph. I make trips to KC occasionally (sometimes as far as Belton/ Peculiar). I also go to Beatrice, Ne. often.

Grille is sold to Blazerman. Rob, I can drop it off any night after work- I usually get off 3:30 or 4:30. Or you can swing out here. Let me know what works best for you.

Thanks
Jeff

[RicksTrucks]

1. Is there any sag, broken springs, in the seat?
2. Paint good on the front bumper? Any surface rust?
3. Never saw rear shocks like that. What did this come off of? Since it has coil, must be a half ton.

[jeffspower]

Originally Posted by RicksTrucks

1. Is there any sag, broken springs, in the seat?
2. Paint good on the front bumper? Any surface rust?
3. Never saw rear shocks like that. What did this come off of? Since it has coil, must be a half ton.

1- I'll have to pull it out & look at it closely. I'll get more pics when I do, probably Tuesday night.

2- "Show" paint, no. Good average paint, yes. Don't think there is any rust. I'll have to look closer.

3- Seen them a lot. Parts store "load carrying" upgrade. It is a light GVW 3/4 ton- pretty common on the Chevys.

I have a coworker that has property in OK- south of Wichita if you are in that area. MIGHT be able to arrange something if we strike up a deal.

Thanks
Jeff

[RicksTrucks]

Originally Posted by jeffspower

1- I'll have to pull it out & look at it closely. I'll get more pics when I do, probably Tuesday night.

2- "Show" paint, no. Good average paint, yes. Don't think there is any rust. I'll have to look closer.

3- Seen them a lot. Parts store "load carrying" upgrade. It is a light GVW 3/4 ton- pretty common on the Chevys.

I have a coworker that has property in OK- south of Wichita if you are in that area. MIGHT be able to arrange something if we strike up a deal.

Thanks
Jeff

1. Ok
2. Thanks
3. 3/4 usually have leaf springs. Wonder if those would help with loads on my 3/4 leaf spring truck or are they only for coils?

On the NE side of OK, but that would be closer for me, thanks.

[coast2coast]

If RicksTrucks passes on the front bumper, I'll take it. I can pick it up next Friday evening if that will work for you.

[ScottH]

May be in need of one of those hubcaps.

Thanks.

Scott

[coast2coast]

Is the radiator support up for grabs? If so, how much, and what condition is it in?

[72SWBChevy]

Originally Posted by coast2coast

Is the radiator support up for grabs? If so, how much, and what condition is it in?

X2 - might not be worth it if I have to have it shipped to 77018 Houston.

[72SWBChevy]

if coast2coast is not interested.

[jeffspower]

Coast2coast, I'll get more pics of the bumper so RicksTrucks can decide. If he doesn't want it, you are next in line. The core support is rusted out under the battery. I'll get pics of it too. It's free if you want to remove it

72SWBChevy, yep- I think shipping would be too high for what it's worth.

ScottH, I'll think about the hub cap. I was wanting to use them on my box trailers. I might know where some more are. I'll check with my friend on it this weekend.

[jeffspower]

Here's more pics:

[ScottH]

Thanks, I'm only one short so anything you can do is appreciated.

Scott

[jeffspower]

Here's seat pics. Very good foam & springs with one busted spring in the driver's side edge. Tracks work good too. You can see it isn't saggy.

[jeffspower]

More

[RicksTrucks]

I would like to offer $100 for the front bumper and seat and see if we can work out pick up or delivery. Tell me more about how it would work if I picked it up from your co-worker.

[jeffspower]

RicksTrucks, you have a PM.

[ScottH]

Jeff, found a hubcap. Thanks.

Scott