Need Some Brake Lines.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FRENCHBLUE72** · 08-23-2007, 09:14 PM

iF YOU HAVE REPLACED YOUR BRAKE LINES WHERE DID YA GET THEM ,HOW MUCH AND HOW WAS THE SHIPPING..

1968SWBBigBlock · 08-23-2007, 09:21 PM

Right stuff detailing
http://www.rightstuffdetailing.com/
I paid 35.00 for my rear lines in stainless steel
24 hour turn around
Spot on look and bends

1970bowtie · 08-23-2007, 09:29 PM

we were going to order some trans cooler lines today from classic industries, and they wanted nearly 50 dollars to ship, so maybe that'll give you an idea

**twotrucks** · 08-23-2007, 09:39 PM

I bought mine from GMCPauls and I don't remeber the shipping being that bad. They were made by Inline Tube.

Aarons72s · 08-23-2007, 10:10 PM

I got mine from inline tube. But I dont remember how much they were or shipping. I got them in 1998. But I can tell you they fit good. I dont think shipping was to bad if you get them from them.

1969k10stepside · 08-23-2007, 10:15 PM

$5 for 5' of line.Roughly 30' of line bought total with some left over,a $7 bender,and a few hours of bending them myself..That's what I have in my brake lines

cdowns · 08-23-2007, 11:11 PM

i've bought inline stuff and it was nicely done/also bought a set from lmc with no complaints/but i mostly do-it-myself when i need to save monet

**truckdude239** · 08-24-2007, 07:26 AM

i orderd mine right from inlinetube www.inlinetube.com

Joe67 · 08-24-2007, 07:31 AM

Inline Tube - no shipping as they are local to me

72armyswbtruck · 08-24-2007, 08:46 AM

Sweet I like Inline's web site, just wish that they ahd 3/4ton drum brake kits.
Anyone know where I can get a complete rebuild 3/4 brakes rebuild kit for a 71 Dana 60 non finned 13 inch I believe

skokie · 08-24-2007, 11:45 AM

Inline tube.

GMCBubba · 08-24-2007, 11:46 AM

72army: i have a 69 dana 60 and i got all my brake parts from partsamerica.com. drums are about $110 each

Musclerodz · 08-24-2007, 02:55 PM

We carry Classic tube and they have 3/4 T kits

Mike

rodstored-72 · 08-24-2007, 04:20 PM

well i guess i am ol'school i bought mine from lmc. they fit pretty good. i would have bent my own but i wasn't sure the location that the lines were at. i at the time did not have that much experience with bending lines....

**FRENCHBLUE72** · 08-25-2007, 11:24 AM

Thanks for the help guys looks like inline tube will be my choice

mvfd70 · 08-25-2007, 03:08 PM

I don't know how they are for full kits but I just bought a replacement line for the rear of my 97 z71 from O'Reilly's. It was only about 3 feet long total but they've got some new kind of line that doesn't require a bender to bend. Had a little left over after and I played around with it and could not get it to kink. Just bent it by hand to get everything to fit.

08-23-2007, 09:14 PM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Need Some Brake Lines.. iF YOU HAVE REPLACED YOUR BRAKE LINES WHERE DID YA GET THEM ,HOW MUCH AND HOW WAS THE SHIPPING.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-23-2007, 09:21 PM	#2
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Need Some Brake Lines.. Right stuff detailing http://www.rightstuffdetailing.com/ I paid 35.00 for my rear lines in stainless steel 24 hour turn around Spot on look and bends __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

08-23-2007, 09:29 PM	#3
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: Need Some Brake Lines.. we were going to order some trans cooler lines today from classic industries, and they wanted nearly 50 dollars to ship, so maybe that'll give you an idea __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

08-23-2007, 09:39 PM	#4
twotrucks Junior Member Join Date: Jun 2003 Location: Louisville,Ky Posts: 383	Re: Need Some Brake Lines.. I bought mine from GMCPauls and I don't remeber the shipping being that bad. They were made by Inline Tube.

08-23-2007, 10:10 PM	#5
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,670	Re: Need Some Brake Lines.. I got mine from inline tube. But I dont remember how much they were or shipping. I got them in 1998. But I can tell you they fit good. I dont think shipping was to bad if you get them from them.

08-23-2007, 10:15 PM	#6
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: Need Some Brake Lines.. $5 for 5' of line.Roughly 30' of line bought total with some left over,a $7 bender,and a few hours of bending them myself..That's what I have in my brake lines

08-23-2007, 11:11 PM	#7
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Need Some Brake Lines.. i've bought inline stuff and it was nicely done/also bought a set from lmc with no complaints/but i mostly do-it-myself when i need to save monet Attached Images __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

08-24-2007, 07:26 AM	#8
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,220	Re: Need Some Brake Lines.. i orderd mine right from inlinetube www.inlinetube.com __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

08-24-2007, 07:31 AM	#9
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: Need Some Brake Lines.. Inline Tube - no shipping as they are local to me __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

08-24-2007, 08:46 AM	#10
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: Need Some Brake Lines.. Sweet I like Inline's web site, just wish that they ahd 3/4ton drum brake kits. Anyone know where I can get a complete rebuild 3/4 brakes rebuild kit for a 71 Dana 60 non finned 13 inch I believe __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

08-24-2007, 11:45 AM	#11
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,300	Re: Need Some Brake Lines.. Inline tube. __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

08-24-2007, 11:46 AM	#12
GMCBubba Registered User Join Date: Oct 2006 Location: Simpsonville, SC Posts: 255	Re: Need Some Brake Lines.. 72army: i have a 69 dana 60 and i got all my brake parts from partsamerica.com. drums are about $110 each __________________ 1969 GMC 3/4 ton, 307, 4-speed NP435GL, DANA 60, 4.10, HD rear leafs, manual everything, leaking oil and water. Now rocking 383, NV4500, power steering, power brakes. Finally undergoing restoration. Last edited by GMCBubba; 08-24-2007 at 11:51 AM.

08-24-2007, 02:55 PM	#13
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: Need Some Brake Lines.. We carry Classic tube and they have 3/4 T kits Mike __________________ Mike Redpath

08-24-2007, 04:20 PM	#14
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,973	Re: Need Some Brake Lines.. well i guess i am ol'school i bought mine from lmc. they fit pretty good. i would have bent my own but i wasn't sure the location that the lines were at. i at the time did not have that much experience with bending lines....

08-25-2007, 11:24 AM	#15
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Need Some Brake Lines.. Thanks for the help guys looks like inline tube will be my choice __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

08-25-2007, 03:08 PM	#16
mvfd70 Registered User Join Date: Jan 2007 Location: Opdyke, IL Posts: 775	Re: Need Some Brake Lines.. I don't know how they are for full kits but I just bought a replacement line for the rear of my 97 z71 from O'Reilly's. It was only about 3 feet long total but they've got some new kind of line that doesn't require a bender to bend. Had a little left over after and I played around with it and could not get it to kink. Just bent it by hand to get everything to fit. __________________ 1978 Chevrolet Silverado 3/4 ton 400 small block. 2000 F-250 Powerstroke 2002 GMC Yukon Denali XL

Register or Log In To remove these advertisements.