finding parts for my truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

armyavncowgirl · 08-25-2007, 06:46 PM

hey ya'll, i just pulled my truck out of the driveway and into a garage. lifted her up and man does she ever need alot of lovin! I've been looking through the LMC Catalog but there are few parts I'm having difficulty locating. I was wonderin' if ya'll knew where I could find some parts:

raiders3581 · 08-25-2007, 06:49 PM

sorry i have no parts help, but i would like to say welcome home, and thank you.

larry may · 08-25-2007, 06:50 PM

O'rielys or some other parts store has most of what you listed. Xmember pick n pull

BurnoutNova · 08-25-2007, 06:53 PM

become a site suporter and post a want to buy ad on the parts page... somebodys got to have the crossmember for you

BB72CHEVKT · 08-25-2007, 06:53 PM

Thanks for your service. Welcome home!!!!!

Thealien · 08-25-2007, 07:31 PM

Free ttt and thank you for your service. Good luck finding what you're looking for.

PanelDeland · 08-25-2007, 08:26 PM

WELCOME!!!!!!

There is also a listing for board vendors.They tend to give a better price than LMC.Most ship anywhere and many will bring whatever you need to a swap meet if they are attending one you will be at.Calling ahead and getting them to bring what you need may save you shipping which can be almost as expensive as the parts.They also build these trucks and can help you overcome or avoid the pitfalls.You may find your build going faster and costing less by using them.Some may give slight discounts to BB members.
Clean it up and evaluate what needs doing then make a list and prioritize those things related to safety and reliability.Good Luck!!!

**72 Super** · 08-25-2007, 09:06 PM

Thank you for your service.Goodluck on finding the items you need.

st1x10 · 08-25-2007, 09:14 PM

Thanks for what you did. Do you have any pics of the truck?

armyavncowgirl · 08-27-2007, 07:50 PM

thanks for the welcome home, i've been home a while but its been a bit since i've been able to get onto this site. been super busy since getting back. but anyways, a request for photos has been posted so i'm going to hook you up.

armyavncowgirl · 08-27-2007, 07:55 PM

god i love my truck

the amount of work that is going to be required doesnt come close to discouraging me. from what we've seen so far, shes worth it. i had her looked at for a down to bare metal restore during my next deployment and he gave me a pretty fair estimate. so it will be worth it. i just have to get all the necessities done before i can put her back on the road. shes not safe to drive at the moment, well given that the clutch is gone and the brakes aren't far from it shes not going on the road until thats done. but with the crossmember being missing (still confused about that) and all these bushings being shot, yeah shes going to need a fair amount of tlc. i'm excited though, finally i get a chance to really tear into her and get her back on the road for good. i've missed it. i'll take all ya'lls suggestions and run them through my buddy whose helping me out. we'll check everything out and see what works out best for us. looking to spend every weekend on her until i'm done. we'll see. thanks for all your suggestions

Longhorn Man · 08-27-2007, 07:57 PM

wow.. been wonderin where you been, welcome home.
I've never owned a 3 speed... but I don't think they even had crossmembers on them.

Zeke · 08-27-2007, 08:10 PM

Welcome home and thanks!

Don't think 3spd have a rear crossmember, friend of mine had a 64 and my 69 both 3spd and no rear crossmember just crossmember that bell housing mounts to.

armyavncowgirl · 08-27-2007, 08:11 PM

well, its got the mounting for it so thats why we're lost lol. not sure what it had in it originally but seems a little naked under there lol

**Boog** · 08-27-2007, 08:59 PM

I don't know how many years they were built that way but through the sixties all manual trans 2 wheel drives used only the bell housing crossmember setup as far as I know. You could have a muffler shop fab one up if ya really think it needs one on the tail end too.
You expect to be deployed again before this Iraq thing is over?

armyavncowgirl · 08-28-2007, 07:50 PM

oh yeah, i'll deploy a few more times i'm sure

08-25-2007, 06:46 PM	#1
armyavncowgirl C10 Junkie Join Date: May 2005 Location: Fort Hood, Texas Posts: 194	finding parts for my truck hey ya'll, i just pulled my truck out of the driveway and into a garage. lifted her up and man does she ever need alot of lovin! I've been looking through the LMC Catalog but there are few parts I'm having difficulty locating. I was wonderin' if ya'll knew where I could find some parts: __________________ 09 Chevrolet HHR --- Cruck --- cross between a Car and a Truck Former rides: 1967 C10 LWB 1972 C10 LWB 1969 C10 LWB (parts truck) Last edited by Josh; 08-27-2007 at 09:29 PM. Reason: WTB by NON sub.

08-25-2007, 06:49 PM	#2
raiders3581 Junior Member Join Date: Jun 2006 Location: pomona ca Posts: 187	Re: finding parts for my truck sorry i have no parts help, but i would like to say welcome home, and thank you. __________________ 67 short bed fleetside/1997 c1500 exteded cab/ 2004 accord/87 c10silverado 350 od tbi

08-25-2007, 06:50 PM	#3
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: finding parts for my truck O'rielys or some other parts store has most of what you listed. Xmember pick n pull __________________ The biggest problem people have, is other people Thou shalt be cool and not hassle Be a site supporter. The heart of the wise inclines to the right, but the heart of the fool inclines to the left." Ecclesiastes 10:2

08-25-2007, 06:53 PM	#4
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: finding parts for my truck become a site suporter and post a want to buy ad on the parts page... somebodys got to have the crossmember for you

08-25-2007, 06:53 PM	#5
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,948	Re: finding parts for my truck Thanks for your service. Welcome home!!!!! __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

08-25-2007, 07:31 PM	#6
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,120	Re: finding parts for my truck Free ttt and thank you for your service. Good luck finding what you're looking for.

08-25-2007, 08:26 PM	#7
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: finding parts for my truck WELCOME!!!!!! There is also a listing for board vendors.They tend to give a better price than LMC.Most ship anywhere and many will bring whatever you need to a swap meet if they are attending one you will be at.Calling ahead and getting them to bring what you need may save you shipping which can be almost as expensive as the parts.They also build these trucks and can help you overcome or avoid the pitfalls.You may find your build going faster and costing less by using them.Some may give slight discounts to BB members. Clean it up and evaluate what needs doing then make a list and prioritize those things related to safety and reliability.Good Luck!!! __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

08-25-2007, 09:06 PM	#8
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,678	Re: finding parts for my truck Thank you for your service.Goodluck on finding the items you need. __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

08-25-2007, 09:14 PM	#9
st1x10 Registered User Join Date: Feb 2006 Location: Oklahoma City Posts: 588	Re: finding parts for my truck Thanks for what you did. Do you have any pics of the truck? __________________ 1970 Chevy C10 "Under Construction" 2002 Chevy S10 V6

08-27-2007, 07:50 PM	#10
armyavncowgirl C10 Junkie Join Date: May 2005 Location: Fort Hood, Texas Posts: 194	Re: finding parts for my truck thanks for the welcome home, i've been home a while but its been a bit since i've been able to get onto this site. been super busy since getting back. but anyways, a request for photos has been posted so i'm going to hook you up. __________________ 09 Chevrolet HHR --- Cruck --- cross between a Car and a Truck Former rides: 1967 C10 LWB 1972 C10 LWB 1969 C10 LWB (parts truck)

08-27-2007, 07:55 PM	#11
armyavncowgirl C10 Junkie Join Date: May 2005 Location: Fort Hood, Texas Posts: 194	Re: finding parts for my truck god i love my truck the amount of work that is going to be required doesnt come close to discouraging me. from what we've seen so far, shes worth it. i had her looked at for a down to bare metal restore during my next deployment and he gave me a pretty fair estimate. so it will be worth it. i just have to get all the necessities done before i can put her back on the road. shes not safe to drive at the moment, well given that the clutch is gone and the brakes aren't far from it shes not going on the road until thats done. but with the crossmember being missing (still confused about that) and all these bushings being shot, yeah shes going to need a fair amount of tlc. i'm excited though, finally i get a chance to really tear into her and get her back on the road for good. i've missed it. i'll take all ya'lls suggestions and run them through my buddy whose helping me out. we'll check everything out and see what works out best for us. looking to spend every weekend on her until i'm done. we'll see. thanks for all your suggestions __________________ 09 Chevrolet HHR --- Cruck --- cross between a Car and a Truck Former rides: 1967 C10 LWB 1972 C10 LWB 1969 C10 LWB (parts truck)

08-27-2007, 07:57 PM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: finding parts for my truck wow.. been wonderin where you been, welcome home. I've never owned a 3 speed... but I don't think they even had crossmembers on them.

08-27-2007, 08:10 PM	#13
Zeke Active Member Join Date: Jun 2002 Location: L.A. Lower Alabama Posts: 453	Re: finding parts for my truck Welcome home and thanks! Don't think 3spd have a rear crossmember, friend of mine had a 64 and my 69 both 3spd and no rear crossmember just crossmember that bell housing mounts to. __________________ 1969 C10 350 3spd 1995 GMC 3500 XC 350 dually When Thomas Edison worked late into the night on the electric light, he had to do it by gas lamp or candle. I'm sure it made the work seem that much more urgent. George Carlin

08-27-2007, 08:11 PM	#14
armyavncowgirl C10 Junkie Join Date: May 2005 Location: Fort Hood, Texas Posts: 194	Re: finding parts for my truck well, its got the mounting for it so thats why we're lost lol. not sure what it had in it originally but seems a little naked under there lol __________________ 09 Chevrolet HHR --- Cruck --- cross between a Car and a Truck Former rides: 1967 C10 LWB 1972 C10 LWB 1969 C10 LWB (parts truck)

08-27-2007, 08:59 PM	#15
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,023	Re: finding parts for my truck I don't know how many years they were built that way but through the sixties all manual trans 2 wheel drives used only the bell housing crossmember setup as far as I know. You could have a muffler shop fab one up if ya really think it needs one on the tail end too. You expect to be deployed again before this Iraq thing is over? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross



Register or Log In To remove these advertisements.

08-28-2007, 07:50 PM	#16
armyavncowgirl C10 Junkie Join Date: May 2005 Location: Fort Hood, Texas Posts: 194	Re: finding parts for my truck oh yeah, i'll deploy a few more times i'm sure __________________ 09 Chevrolet HHR --- Cruck --- cross between a Car and a Truck Former rides: 1967 C10 LWB 1972 C10 LWB 1969 C10 LWB (parts truck)

Register or Log In To remove these advertisements.