Suspension parts! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BaggedC10 · 10-03-2002, 08:13 PM

The following parts will fit all 73-87' C10 trucks.

1. NEW 4-leaf 52" long light-duty factory leaf springs. They were never used, manufactured using original GM specs., and were purchased from Eaton Springs. I paid $486.00 for them, but am willing to let them go for $250.00 + shipping. I also applied a fresh coat of black paint to them.

2. DJM 5" flip kit that was never used. All hardware, instructions, and etc. are included. Flip kits does not include shock extenders though. I originally paid $100.00 from DJM, but will sell for $35.00 + shipping.

3. Smooth-Rider 4" lowered leaf springs, with less than 5,000 miles of use. Originally paid $350.00, but will sell for $150.00 + shipping.

4. DJM 2" shackles that were never used. Originally paid $40.00, but will sell for $25.00 + shipping.

5. Belltech Nitro-Active shock absorbers for a truck with a 3/4" drop. Less than 5,000 miles of use, and are in excellent condition. Will sell for $65.00 + shipping.

6. TWO sets of original shackles. One pair is used and the other is brand-new from GM. Will sell for $15.00 + shipping.

7 Factory hangers. Used but in very good condition. Will sell for $20.00.

8. DJM 2" hangers. Excellent condition, but do not include hardware. Will sell for $45.00 + shipping.

That's it for now! BTW, I am very flexible on the price of many of these listed items.

littlebubba · 10-05-2002, 01:53 AM

I have some interest in your suspension pieces, and have some questions about what I need and what you have. email : rodguy55@hotmail.com Mike

low 84 · 10-22-2002, 02:06 AM

ttt

BaggedC10 · 10-24-2002, 02:14 AM

Quote:

Originally posted by low 84
ttt

Thanks!

I forgot all about this thread!

low 84 · 10-24-2002, 02:54 PM

look down the page at love it loud's post he is looking for stuff

10-03-2002, 08:13 PM	#1
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	Suspension parts! The following parts will fit all 73-87' C10 trucks. 1. NEW 4-leaf 52" long light-duty factory leaf springs. They were never used, manufactured using original GM specs., and were purchased from Eaton Springs. I paid $486.00 for them, but am willing to let them go for $250.00 + shipping. I also applied a fresh coat of black paint to them. 2. DJM 5" flip kit that was never used. All hardware, instructions, and etc. are included. Flip kits does not include shock extenders though. I originally paid $100.00 from DJM, but will sell for $35.00 + shipping. 3. Smooth-Rider 4" lowered leaf springs, with less than 5,000 miles of use. Originally paid $350.00, but will sell for $150.00 + shipping. 4. DJM 2" shackles that were never used. Originally paid $40.00, but will sell for $25.00 + shipping. 5. Belltech Nitro-Active shock absorbers for a truck with a 3/4" drop. Less than 5,000 miles of use, and are in excellent condition. Will sell for $65.00 + shipping. 6. TWO sets of original shackles. One pair is used and the other is brand-new from GM. Will sell for $15.00 + shipping. 7 Factory hangers. Used but in very good condition. Will sell for $20.00. 8. DJM 2" hangers. Excellent condition, but do not include hardware. Will sell for $45.00 + shipping. That's it for now! BTW, I am very flexible on the price of many of these listed items. __________________ 2001 Silverado bagged on 22's. Sold

10-05-2002, 01:53 AM	#2
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 323	question 4 U I have some interest in your suspension pieces, and have some questions about what I need and what you have. email : rodguy55@hotmail.com Mike

10-22-2002, 02:06 AM	#3
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	ttt __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

10-24-2002, 02:54 PM	#5
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	look down the page at love it loud's post he is looking for stuff __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.