|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-21-2007, 05:08 PM
|
#1 |
|
Hittin E-Z Street on Mud Tires
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
What did you get done this weekend, 10-21-07
Haven't done a whole lot lately but I did manage to wash the truck and put a coat of wax on it today.
What did everyone else do? 
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride  American Born, Country by the Grace of God  1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
|
|
|
10-21-2007, 05:34 PM
|
#2 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: What did you get done this weekend, 10-21-07
Swapped stock springs for 4 in lowering ones on the rear.Took the wheel wells out and started cleaning them for paint.Removed heater box and cleaned up ready to install new heater core.Other than that just loafing since i've been working 60-65 hours a week lately.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
10-21-2007, 05:40 PM
|
#3 |
|
Registered User
Join Date: Aug 2007
Location: Laval, Québec, Canada
Posts: 175
|
Re: What did you get done this weekend, 10-21-07
Try to remove bed but I don't have help. I jack the bed slowly, inch after inch! I look this week to rent a cherry picker.
__________________
'71 Custom/10 Deluxe LWB '71 Custom/30 Deluxe Dually |
|
|
|
|
10-21-2007, 06:02 PM
|
#4 | |
|
FarmBoy.
Join Date: Feb 2005
Location: Rhinelander, WI
Posts: 1,103
|
Re: What did you get done this weekend, 10-21-07
threw some primer onto the truck. well, the pieces of the truck. it turned out pretty good, for just being implement primer.
we were going to throw some of the Oliver green onto it today, but the primer didn't cure very well, prolly due to being kinda cool. but thats ok, because it showed alot of imperfections that i can work out this week before we give it another coat next weekend-ish.   for more pics head on over to my build thread. . see my sig.-Sam.
__________________
1969 GMC C1500. long fleet. 307. 3 on the tree. 3.07 gears. Oliver green. Bent and bruised. Daily Driver. Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=242993 |
|
|
|
|
|
10-21-2007, 07:20 PM
|
#5 |
|
Registered User
Join Date: Oct 2007
Location: north carolina
Posts: 470
|
Re: What did you get done this weekend, 10-21-07
got the cab wet sanded and ready for paint tomorrow!
|
|
|
|
|
10-21-2007, 07:45 PM
|
#6 |
|
www.67HEAVEN.com
Join Date: Oct 2007
Location: SouthCentral Ontario
Posts: 625
|
Re: What did you get done this weekend, 10-21-07
Well, this weekend, I took my backyard from this....
  ...to this.  All part of getting to this.....  Room for my next project. 
__________________
www.67HEAVEN.com 2004 Z71 Tahoe 4x4 5.3L (factory white monochrome theme) 1989 Silverado K1500 4x4 5.7L sportside (white monochrome theme) 1967 Belair 2-door-post (project) 1967 Corvette 427/435 coupe (now 502/502 red road warrior)
|
|
|
|
|
10-21-2007, 07:53 PM
|
#7 |
|
Registered User
Join Date: Nov 2005
Location: VIRGINIA
Posts: 905
|
Re: What did you get done this weekend, 10-21-07
man thats some wide footers there, thats gonna be a nice garage thou, bet ya cant wait to get it done,, i vacumed out my truck and cleaned the inside out real good, then took it fer a ride and turned the heater fan on and it blew ole leaves and stuff rite back out on the carpet.. figured i may as well let it all blow out thou. instead of a vacum i belive ill need a garden rake this time
__________________
1969 rs 1966fastback 1969swbc/10 2006gt 1972swb4x4 |
|
|
|
|
10-21-2007, 08:18 PM
|
#8 |
|
Registered User
Join Date: Mar 2004
Location: Hoytsville, Utah
Posts: 3,365
|
Re: What did you get done this weekend, 10-21-07
It was clean out the shop weekend for me. I had to get that old boat out to make some room.
 I built some shelves and rearrainged some other stuff and gave it a good sweeping.    Now I'll have the room I need to tear down my Panel this winter.Gotta start that project pretty soon.  I still have some work to do on my shop. The interior still need more insulation and sheetrock. And pegboard. Everything above 4' is pegboard. I have almost enough sheetrock to finish the ceiling. That dang boat was in the way of hanging the 'rock, so now I can finish that stuff. I almost have all the parts to hook up the heating system, too. A couple hundred more dollars and I'll have a heated shop. I can't wait for that, since it snowed all day Saturday.
__________________
'68 Panel Project Boogie Chillin' '68 C-10 Ol' Green |
|
|
|
|
10-21-2007, 08:49 PM
|
#9 |
|
State of Confusion!
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,744
|
Re: What did you get done this weekend, 10-21-07
Friday and part of Saturday I helped EdB with tracking down a wiring problem on his 94. Saturday also involved servicing the daughters' Bonneville, Saturday and Sunday I did get some time on the 70. Worked on tweaking the doors so they fit better.
http://67-72chevytrucks.com/vboard/s...=221437&page=5
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
|
10-21-2007, 08:50 PM
|
#10 |
|
Registered User
Join Date: Sep 2007
Location: Wylie TEXAS
Posts: 81
|
Re: What did you get done this weekend, 10-21-07
Replaced the instrument cluster with a new one with rebuilt gauges and polished original lense. Installed a universal windshield washer pump to original switch. Now the gauges look good and the washer squirts.
__________________
1972 Cheyenne C10 Unrestored Original-3 Owner-RUST FREE Texas Truck Big Block-TH400-PS-PB-AC-AM/FM Radio |
|
|
|
|
10-21-2007, 08:51 PM
|
#11 |
|
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
Re: What did you get done this weekend, 10-21-07
Bought 11 trucks to sell or part out, got 3 of them home. Became a VENDOR on the board again!!!!
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
|
|
|
|
10-21-2007, 09:01 PM
|
#12 |
|
Problem Child
Join Date: Sep 2005
Location: Kettering Ohio
Posts: 1,248
|
Re: What did you get done this weekend, 10-21-07
Didnt do much.I replaced the ps pressure hose and fixed my taillights ground so they now work
__________________
1972 gmc sierra grande 350/350 a/c soon`to get a new 350 I Survived Norwood 
|
|
|
|
|
10-21-2007, 09:18 PM
|
#13 |
|
PROJECT 7DEUCE
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,590
|
Re: What did you get done this weekend, 10-21-07
I drove 700 miles to reno nevada(ROUND TRIP) to pick up a top and tailgate and carpet strips from blue4x4.. Thanks SCOTT
__________________
GO BIG GREEN GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 10-21-2007 at 09:19 PM. |
|
|
|
|
10-21-2007, 09:23 PM
|
#14 | |
|
PITbut
Join Date: Sep 2007
Location: monroe washington
Posts: 3,041
|
Re: What did you get done this weekend, 10-21-07
Quote:
 And found this  Any recommendations on what replacement parts i need. ahah |
|
|
|
|
|
10-21-2007, 09:30 PM
|
#15 |
|
Junior Member
Join Date: Dec 2006
Location: Southeast Missouri
Posts: 2,436
|
Re: What did you get done this weekend, 10-21-07
Saturday we went over to the Fall Festival in Piedmont and checked out the cars and trucks at the Car Show.
Sunday morning I started checking over the '77 GMC 6500 tilt cab dump truck we bought Tuesday to see what needed to be done to it to make it reliable. In the afternoon I went to my son's to help him set up his new computer and check-out the 402 engine he bought Saturday. Danny - Southeast Missouri |
|
|
|
|
10-21-2007, 09:47 PM
|
#16 |
|
Chevy nut
Join Date: Jun 2007
Location: Springfield, Illinois
Posts: 2,265
|
Re: What did you get done this weekend, 10-21-07
I got nothing done to my 69...but I turned the 77 into a pile of scrap!
__________________
84 Chevy Custom Deluxe 1/2 Ton Named Fade To Black II "Remember kids there is NO replacement for displacement!" |
|
|
|
|
10-21-2007, 09:50 PM
|
#17 |
|
It's Done When It Runs!!
Join Date: Sep 2002
Location: Jacksonville, FL (Orange Park)
Posts: 220
|
Re: What did you get done this weekend, 10-21-07
I pulled my exhaust and ran open headers for the weekend. I think I need a hearing test now
__________________
 Or Give Me DEATH
|
|
|
|
|
10-21-2007, 09:59 PM
|
#18 |
|
Senior Member
Join Date: Jun 2006
Location: Oregon City, Or
Posts: 758
|
Re: What did you get done this weekend, 10-21-07
Finally got the motor in my truck.
__________________
63 short fleet Patina build http://67-72chevytrucks.com/vboard/s...d.php?t=287751 Man I want another one. |
|
|
|
|
10-21-2007, 10:05 PM
|
#19 |
|
Registered User
Join Date: Aug 2007
Location: Stratford,SD
Posts: 296
|
Re: What did you get done this weekend, 10-21-07
I lifted my 350 up with an ancient chain hoist(that my great grandpa installed) to drain the fluids and start tearing it apart and the chain sliped crushed the five gallon bucket and there was oil everywhere, I just got my hand out from underneath it, I really need a cherry pickerand engine stand that ancient hoist works great but it take like 10 minutes to get up a foot
__________________
1967 c-10 longbox project, check it out in projects 1969 c-10 parts pickup, twisted frame Daily driver- 1970 Olds delta 88, 2dr., 455, gotta love the big block Last edited by oldsmobilekindofguy; 10-21-2007 at 10:05 PM. |
|
|
|
|
10-21-2007, 10:12 PM
|
#20 |
|
Keepin it runnin!
Join Date: Oct 2007
Location: Deep River, CT
Posts: 1,036
|
Re: What did you get done this weekend, 10-21-07
Pulled the front hubs & drums apart on the C-20.....she had rivited lining! I wonder if its the original shoes??
 The list got pretty long on parts that need to be rebuilt/replaced discovered this weekend... RH U-Joint(broken), inner & outer axel's (yokes were broken), spindle seals, hub seals, wheel cylinder, 1/2 drag link (would not take any grease even after light heat & new zerk), LH Ball joints (lower is shot), all shoes, drums need to be cut, adjuster kits & springs. new list of parts to order! Frank
__________________
1970 K-5 4X4 Blazer  1970 K-20 4X4 Long Bed "Liberty Means Responsibility, that is why most men dread it" |
|
|
|
|
10-21-2007, 10:17 PM
|
#21 |
|
Junior Member
Join Date: Jul 2006
Location: Delran, NJ
Posts: 458
|
Re: What did you get done this weekend, 10-21-07
Painted my battery tray w/ POR-15 + Rustoleum primer + rustoleum flat black. Did the same to washer bottle harness. De-rusted and primered back of radio delete plate for Billsbowtie (just sold it to him). Also polished the billet grille I just sold to him. Then drilled the rivets out of the L & R brackets on the '71 outer grille I sold to Luvlegs. Primered and painted them flat black. Oh yeah, and I farted. A lot.
|
|
|
|
|
10-21-2007, 10:18 PM
|
#22 |
|
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: What did you get done this weekend, 10-21-07
Worked at work on Saturday and then mowed the lawn and picked up sticks today.
__________________
-Nate  1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
|
|
|
|
10-21-2007, 10:37 PM
|
#23 |
|
Chinook Arch
Join Date: Feb 2005
Location: High River, Alberta, Canada
Posts: 218
|
Re: What did you get done this weekend, 10-21-07
I got to the bottom of the knocking in my new engine and booked an appointment for GM to fix it.
Currently reading up on tuning Holley 4150 carbs so I can make some adjustments.
__________________
1972 GMC 1500 Custom - Bought used by Grandpa in '74, currently back on the road after a long hiatus. Elsie's truck 2.5" dual exhaust with Hooker Aero Chambers Holley 670 Street Avenger Edelbrock Performer RPM on GMPP 290HP 350 ECE drop 3.5/5 |
|
|
|
|
10-21-2007, 11:47 PM
|
#24 |
|
Registered User
Join Date: Aug 2007
Location: West Hills, California
Posts: 679
|
Re: What did you get done this weekend, 10-21-07
I installed hood back on and washed it. Today I finally filled the tank all the way up for the first time since I bought it and put some miles on it. I am having too much fun with it. Right rear tire just goes up in smoke. I will be getting a locker for it soon. I still need to find out what gears are in it.
|
|
|
|
|
10-22-2007, 01:07 AM
|
#25 | |
|
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,285
|
Re: What did you get done this weekend, 10-21-07
cleaned the 71 K20s transfer case for painting, drove around the farm, took the 79 K10 through the pond.... twice
__________________
ASE Master Certified-GM Trained-Mechanic 1968 Chevy C30 157" WB Wrecker 1969 Chevy CST/10 SWB 1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed 1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205 1974 Chevy Custom Deluxe/10 1979 Chevy Custom Deluxe K10 farm truck beater 1989 Chevy K2500 Quote:
Last edited by Blue_71; 10-22-2007 at 01:09 AM. |
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
