71Chevy 4x4 Frame in Missouri

[6600DURAMAX]

Have a 1/2 ton frame with a 12 bolt rear and dana 44 axles. 4'' Tuff Country front springs. Has 3.73 gears with a spool in the rear. Switch out frames during my build of the new truck. Rear has new drum brakes and the front has new calipers. There is some rust around the rear spring hangers. $500

Also have a NP205 for a TH350 $250

Factory Chrome 8 lug wheels off a 2004 Dodge Ram -Tires are there but are pretty bald

Bunch of other misc. odds and ends laying around

1968 Factory ½ ton 4x4 axles - These came on a 4x4 frame I bought, they are rough and I have not pulled the covers ( I can if someone really wants me to ) They do have a vintage set of lockouts that might be worth something??? Or maybe someone can use what good…… I just want them out of here
$150


1972 Chevy Chrome Tube Grill – Perfect shape, no rust or anything like that
$50

Holley Strip Dominator for a BBC – Very nice high performance intake $150

PBM Chrome SBC valve covers – Brand New in the box $25

Shocks for a 4’’ lift, they are gray with blue boots $60

Dana 60 - 3’’ Steering block with studs $50

Used MSD cap and Rotor off a Billet distributor and a set of MSD plug wires, (bought a new one for the new motor) $20 for it all

Aluminum spark plug wire loom with chevy emblem $ 35

[6600DURAMAX]

Ttt

[49m]

Factory Chrome 8 lug wheels off a 2004 Dodge Ram -Tires are there but are pretty bald
what the price

[6600DURAMAX]

49M, I actually have to sets, one is the steel wheel with Chrome cladding the other is the Aluminum /Chrome factory rims. both have BFG rugged trail tires. All 8 tires have approx. 10% tread left. All do hold air though. The Aluminum wheels are currently on my Cummins but are soon to be replaced by another set next week.

I would take $75 for the Steel Chrome and $200 for the Aluminum

****** I also have 4 Pro-Comp Mud Terrain size is 35x12.50x17 They will fit on either of those rims. They have 25-30% left. Will take $200 for those******

[6600DURAMAX]

Ttt

[Husker]

What kind of shape are the shocks in?
Ron

[69chevy84]

hey just curious but do u still have the frame for sale? im looking for a 4wd frame for my 69 chevy lwb

[special-K]

What rear springs does it have.Is that blocks on the front axle?

[6600DURAMAX]

Husker - Shocks worked fine, do not leak, will post some pic tomorrow if possible

69Chevy84 - Yes the frame is still for sale

Special-K - It has factory rear springs, the blocks that are up front should go in the rear, it was just threw back together to get it out of the shop so I could have some more room, and the guy I had helping mixed it all up.

Anything else just le me know guys

thanks

[69chevy84]

im interested in the frame but i live in texas and my truck is in maine....have u dealt with shipping frames or vehicles at all....if possible after purchase liked to have it shipped to maine but have never done anythin like that before. what do u think or do u have any input?

[6600DURAMAX]

I hate to turn anyone away from a sale of mine but to be honest it would probably be easier to find one closer to Maine. I would think it could cost up to $300-$500 to have it shipped. I am sure there is someone on this board that is closer. Dont take that the wrong way I really need to get rid of this for some play money, but it would probably not be the most cost effective way for you to go. If any of my other parts that can be shipped will work I would be happpy to UPS or USPS stuff.

[Fish Master]

Do you still have the frame if so is short or long

[6600DURAMAX]

It is a longbed frame

Someone make me an offer, I need this gone, so I can buy driveshafts