72 front disk set up s.e. pa. local p/u only - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldschooler · 06-11-2009, 02:34 PM

I have a front disc set up spindle to spindle off a 72 frame I bought from another member. Everything is rusty from sitting out. 1 upper control arm has rust through. I would replace the calipers(good for cores). Rotors should clean up with a good turning, I assume spindles are stock height. Coils should clean up nice. 50.00 for the whole shebang. I can take pictures or you are more than welcome to stop by and take a look. I live between York pa. and Hanover Pa. Later, Rich

jaros44sr · 06-12-2009, 12:32 AM

5 lug or 6 lug?

oldschooler · 06-12-2009, 06:58 AM

Quote:

Originally Posted by jaros44sr

5 lug or 6 lug?

Sorry about that, 5 lug 2 wheel drive 1/2 ton. Later, Rich

jaros44sr · 06-12-2009, 09:40 AM

Sorry won't work for me...good luck with your sale

oldschooler · 06-13-2009, 01:05 PM

ttt

spatz · 06-13-2009, 08:38 PM

I am interested in the front crossmember that you have for sale for $50.00.
I can be in your area on the 2nd or 3rd of July to pick it up. just let me know, how is the crossmember itself, any rust through the crossmember? Also ill pay for it when i pick it up if ok. please send pics if possible.

oldschooler · 06-14-2009, 04:54 AM

Quote:

Originally Posted by spatz

I am interested in the front crossmember that you have for sale for $50.00.
I can be in your area on the 2nd or 3rd of July to pick it up. just let me know, how is the crossmember itself, any rust through the crossmember? Also ill pay for it when i pick it up if ok. please send pics if possible.

I was going to use the crossmember off of the donor frame. Did you want all the other stuff also? Let me see what the crossmember looks like on my truck, for another 15.00 I could probably do that, just to get rid of everything. Pm me your e-mail address, and I will send you some pictures this week. I think the only rust through was on the d.s. upper control arm. july 2-3 sounds o.k., also payment when picked up is fine. Later, Rich
p.s. I can get pictures taken today if still interested.

spatz · 06-14-2009, 01:15 PM

Quote:

Originally Posted by oldschooler

I was going to use the crossmember off of the donor frame. Did you want all the other stuff also? Let me see what the crossmember looks like on my truck, for another 15.00 I could probably do that, just to get rid of everything. Pm me your e-mail address, and I will send you some pictures this week. I think the only rust through was on the d.s. upper control arm. july 2-3 sounds o.k., also payment when picked up is fine. Later, Rich
p.s. I can get pictures taken today if still interested.

sounds good. E-mail is kaffyt_bear@yahoo.com i can get by with my crossmember just got to patch a rust through spot. but upper and lower a arms, spindles and everything else will be needed. thanks and ill wait for a reply so that we can set a time that would good for you for me to stop by pick everything up. thanks again.

06-11-2009, 02:34 PM	#1
oldschooler Registered User Join Date: Mar 2007 Location: spring grove, Pa. Posts: 538	72 front disk set up s.e. pa. local p/u only I have a front disc set up spindle to spindle off a 72 frame I bought from another member. Everything is rusty from sitting out. 1 upper control arm has rust through. I would replace the calipers(good for cores). Rotors should clean up with a good turning, I assume spindles are stock height. Coils should clean up nice. 50.00 for the whole shebang. I can take pictures or you are more than welcome to stop by and take a look. I live between York pa. and Hanover Pa. Later, Rich

06-12-2009, 12:32 AM	#2
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,430	Re: 72 front disk set up s.e. pa. local p/u only 5 lug or 6 lug? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

06-12-2009, 09:40 AM	#4
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,430	Re: 72 front disk set up s.e. pa. local p/u only Sorry won't work for me...good luck with your sale __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

06-13-2009, 01:05 PM	#5
oldschooler Registered User Join Date: Mar 2007 Location: spring grove, Pa. Posts: 538	Re: 72 front disk set up s.e. pa. local p/u only ttt

06-13-2009, 08:38 PM	#6
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: 72 front disk set up s.e. pa. local p/u only I am interested in the front crossmember that you have for sale for $50.00. I can be in your area on the 2nd or 3rd of July to pick it up. just let me know, how is the crossmember itself, any rust through the crossmember? Also ill pay for it when i pick it up if ok. please send pics if possible.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.