can anyone id these parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 07-10-2009, 10:02 PM

**70cst** · 07-10-2009, 10:04 PM

I moved this to the message board where you might get better responses.

paps69 · 07-10-2009, 10:16 PM

Axles out of a front differential. Did you want more specific?

billsbowtie · 07-10-2009, 11:24 PM

thanks70cst
paps69 i was just wondering what they are and what they are worth. i didn't want to throw something away someone could use. i have been junking these trucks for 25 years been threw close to 200 of them but only 4 - 4wds . i learn something new just about everyday.

paps69 · 07-11-2009, 01:40 PM

I'm with you on the learning part. If the splines or bearing surfaces are pitted they're probably junk.

07-10-2009, 10:02 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	can anyone id these parts __________________ i have 67/72 chevy truck parts f/s.

07-10-2009, 10:04 PM	#2
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,356	Re: can anyone id these parts I moved this to the message board where you might get better responses. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 07-10-2009 at 10:04 PM.

07-10-2009, 10:16 PM	#3
paps69 Registered User Join Date: Oct 2006 Location: Guston, Ky Posts: 79	Re: can anyone id these parts Axles out of a front differential. Did you want more specific?

07-10-2009, 11:24 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: can anyone id these parts thanks70cst paps69 i was just wondering what they are and what they are worth. i didn't want to throw something away someone could use. i have been junking these trucks for 25 years been threw close to 200 of them but only 4 - 4wds . i learn something new just about everyday. __________________ i have 67/72 chevy truck parts f/s.

07-11-2009, 01:40 PM	#5
paps69 Registered User Join Date: Oct 2006 Location: Guston, Ky Posts: 79	Re: can anyone id these parts I'm with you on the learning part. If the splines or bearing surfaces are pitted they're probably junk.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.