Keyless entry question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gray Ghost · 07-28-2009, 10:59 AM

On my 05 GMC, the fob unlocks only the drivers door on the first push....takes three to get the passenger door open. Is there a way I can reprogram that or does the dealer have to do it? I want both doors to unlock on the first push.

**Boog** · 07-28-2009, 01:50 PM

I don't know Kelly. Mine takes two pushes to open the pass door. Same with my wife's truck. A call to a dealer can tell ya if they can program it to open both with one push.
That's a good lookin truck. Must be from Arkansas.

Gray Ghost · 07-28-2009, 01:58 PM

Yeah....I was at the dealer this morning and they can do it for $40...I was just checking their story to see if anyone knew how to do it.

Actually this one sold new in OK...your neighbor!!

**john** · 07-28-2009, 04:10 PM

See if you can find out here.

http://www.programyourremote.com/

**bwood** · 07-28-2009, 04:52 PM

Does your truck have the steering wheel controls? If so you should be able to do this without going to the dealer. Also $40 is kinda high for a service they didn't use to charge for. They fixed it on my Mom's Buick (the other way around) for free and also did this for my mother in law on her S10 Blazer which had a dealer installed GM alarm system when she bought it used.

Gray Ghost · 07-29-2009, 07:15 AM

Quote:

Originally Posted by john

See if you can find out here.

http://www.programyourremote.com/

I found that page while searching,....that's how to initialize a new remote. Looks like the dealer is the only way.

JohnC · 07-30-2009, 08:48 AM

I know on my old Grand Prix in the owner's manual it gave ways to personalize the programming for the key fob, and a few other things. I haven't looked in my trucks manual to see if it does. I changed the one on the Grand Prix in like 5 minutes. Very easy.

Gray Ghost · 07-30-2009, 12:18 PM

I was told at the dealer it is not possible to reprogram the remote's functions. Still have to press it twice to get into the passenger door. You can change the locks when you put the truck in gear and park, etc, but that's about it. I read the manual from cover to cover with no mention of changing the FOB functions.

JohnC · 07-30-2009, 04:27 PM

Oh sorry man. Guess I was lucky on the Grand Prix then.

07-28-2009, 10:59 AM	#1
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Keyless entry question On my 05 GMC, the fob unlocks only the drivers door on the first push....takes three to get the passenger door open. Is there a way I can reprogram that or does the dealer have to do it? I want both doors to unlock on the first push. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

07-28-2009, 01:50 PM	#2
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,021	Re: Keyless entry question I don't know Kelly. Mine takes two pushes to open the pass door. Same with my wife's truck. A call to a dealer can tell ya if they can program it to open both with one push. That's a good lookin truck. Must be from Arkansas. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

07-28-2009, 01:58 PM	#3
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: Keyless entry question Yeah....I was at the dealer this morning and they can do it for $40...I was just checking their story to see if anyone knew how to do it. Actually this one sold new in OK...your neighbor!! __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

07-28-2009, 04:10 PM	#4
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: Keyless entry question See if you can find out here. http://www.programyourremote.com/ __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

07-28-2009, 04:52 PM	#5
bwood Registered User Join Date: Jan 2003 Location: Denison, Texas Posts: 1,919	Re: Keyless entry question Does your truck have the steering wheel controls? If so you should be able to do this without going to the dealer. Also $40 is kinda high for a service they didn't use to charge for. They fixed it on my Mom's Buick (the other way around) for free and also did this for my mother in law on her S10 Blazer which had a dealer installed GM alarm system when she bought it used. __________________ 1998 GMC Sierra SLE 1/2 ton 2WD 305 Vortec -Gibson Stainless Cat Back Swept Side -SS Wheels 2005 Honda CRF250R 2006 Honda CRF150F

07-30-2009, 08:48 AM	#7
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Keyless entry question I know on my old Grand Prix in the owner's manual it gave ways to personalize the programming for the key fob, and a few other things. I haven't looked in my trucks manual to see if it does. I changed the one on the Grand Prix in like 5 minutes. Very easy.

07-30-2009, 12:18 PM	#8
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: Keyless entry question I was told at the dealer it is not possible to reprogram the remote's functions. Still have to press it twice to get into the passenger door. You can change the locks when you put the truck in gear and park, etc, but that's about it. I read the manual from cover to cover with no mention of changing the FOB functions. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

07-30-2009, 04:27 PM	#9
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Keyless entry question Oh sorry man. Guess I was lucky on the Grand Prix then.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.