MS Parting Out 72 Blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*1sik52* · 10-19-2009, 06:47 PM

I picked up a 72 Blazer a few weeks ago for some parts and the rest is for sale for parts. If theres something that you may be interested in feel free to ask and I will price the parts out as asked. Thanks

UPDATED LIST

NO SHIPPING on Large Items

Tailgate - $100.00 (Very Straight, No dents)
Rear Seat - $100
Vent Windows - $40.00
Door Glass w/regulators - $40.00
Blazer Door Caps - $25.00
High Trans Hump - $40.00
Blazer Visors and Top Brackets - $50.00
Front Drive Shaft - $60.00
Limited Slip Rearend 3:73 gears - $200
Dana 44 front axle - $200
A/C Dash Radio patch panel area - $40
Original Tilt column - SOLD
Blazer K5 Blazer Emblems - SOLD
Blazer Top Wiring Harness - SOLD
72 Passenger Fender - SOLD
Original Tow Hooks - SOLD
Rear Seat Hold Downs - SOLD
Stainless Steel Blazer Top Hold Down Strips - SOLD
Front Bucket Seats - SOLD

I will update more as I keep disassembling this thing

hgs_notes · 10-19-2009, 07:00 PM

I could use the rear ends of the frame horns. Cut a few inches forward of the last body bushing mounts. Shipping to 56085.

**too much stuff** · 10-19-2009, 07:23 PM

Emblems, seat hold-downs, Seat belts?

*1sik52* · 10-19-2009, 08:11 PM

Quote:

Originally Posted by too much stuff

Emblems, seat hold-downs, Seat belts?

Emblems - I will check to make sure they are in good condition
Seat Hold downs - $50.00
Seat Belts - I will check to see whats there. Im sure if they are they are orange in color

snowblind · 10-19-2009, 08:38 PM

Quote:

Originally Posted by 1sik52

I picked up a 72 Blazer a few weeks ago for some parts and the rest is for sale for parts. If theres something that you may be interested in feel free to ask and I will price the parts out as asked. Thanks

I'm looking for the hardware across the top of the windshield frame. Two brackets in the middle that hold the top to the frame and 1 bracket above each sunvisor. Shipped to Utah, 84105.

Matt

budder71 · 10-19-2009, 10:18 PM

what about the seats ? front buckets and rear seat as well ? and the top ? single or double wall ?

*1sik52* · 10-19-2009, 10:28 PM

Quote:

Originally Posted by snowblind

I'm looking for the hardware across the top of the windshield frame. Two brackets in the middle that hold the top to the frame and 1 bracket above each sunvisor. Shipped to Utah, 84105.

I will check tomorrow on those pieces and let you know

Matt

Quote:

Originally Posted by budder71

what about the seats ? front buckets and rear seat as well ? and the top ? single or double wall ?

George, no top. Both bucket seats and rear seat $250.00

budder71 · 10-19-2009, 10:39 PM

are the seats in decent condition ? mainly the structure of the seats, foam, springs, etc ? if so then I will
take the seats to include front buckets and rear and also nuts bolts and hold downs for the seats !!! thanks
again !!!

*1sik52* · 10-19-2009, 11:10 PM

Yes, seats are in good condition. Fronts even have the seat backs and back is in good condition. Too Much Stuff asked about the hold downs first so I have to give him first dibs on those, but if he doesnt take them then I will throw them in with the seats.

budder71 · 10-19-2009, 11:14 PM

thanks !!!!! My wife is pregnant and due any day/hour/minute so I can send money via paypal or just bring cash when I come down and pick them up... your call doesn't matter to me but I will be down there in the next 7 to 10 days to get them....

budder71 · 10-19-2009, 11:17 PM

what about front fenders and radiator support ?

**too much stuff** · 10-19-2009, 11:21 PM

Quote:

Originally Posted by 1sik52

Yes, seats are in good condition. Fronts even have the seat backs and back is in good condition. Too Much Stuff asked about the hold downs first so I have to give him first dibs on those, but if he doesnt take them then I will throw them in with the seats.

You can go ahead and throw the hold downs in the other guys deal. Keep me posted on the belts and emblems. Eric

budder71 · 10-19-2009, 11:39 PM

thanks again Eric !!! class act !!!

danw210 · 10-20-2009, 12:17 AM

do you have a 4x4 dipstick?

american revolution · 10-20-2009, 02:16 AM

tailgate clean? any pics? how much to ship to 94015?

cmnov · 10-20-2009, 06:45 AM

lights and power to top harness, for the single wall,will take it all if you have it, colin

*1sik52* · 10-20-2009, 08:14 AM

Quote:

Originally Posted by budder71

what about front fenders and radiator support ?

The Passenger fender is in great condition $50.00
The Radiator support is in so so condition. Some rust at the bottom underneath where the battery is located. If you are interested I will let you have it for $25.00

Quote:

Originally Posted by danw210

do you have a 4x4 dipstick?

No Dipstick Sorry!

Quote:

Originally Posted by american revolution

tailgate clean? any pics? how much to ship to 94015?

Tailgate is in very good condition. No dents, No bends. $150.00 plus shipping. I might be able to see what it would cost to stick it on a Greyhound if you are interested.

Quote:

Originally Posted by cmnov

lights and power to top harness, for the single wall,will take it all if you have it, colin

I will have to check today for you.

*1sik52* · 10-20-2009, 08:16 AM

Quote:

Originally Posted by budder71

thanks !!!!! My wife is pregnant and due any day/hour/minute so I can send money via paypal or just bring cash when I come down and pick them up... your call doesn't matter to me but I will be down there in the next 7 to 10 days to get them....

I will hold them for you. Just let me know when you are coming so I know when to expect you

**lks dcvn** · 10-20-2009, 08:43 AM

How is the windshield frame?

**too much stuff** · 10-20-2009, 08:54 AM

Chrome trans case shifter with knob?

**Gary 70 Jimmy** · 10-20-2009, 09:00 AM

Does it have a Roll bar.

*1sik52* · 10-20-2009, 09:06 AM

Quote:

Originally Posted by lks dcvn

How is the windshield frame?

Rusted out so bad that the wind is blowing it away! LOL!

Quote:

Originally Posted by too much stuff

Chrome trans case shifter with knob?

Not there. Sorry

Quote:

Originally Posted by Gary 70 Jimmy

Does it have a Roll bar.

Yes it does.

**Gary 70 Jimmy** · 10-20-2009, 09:19 AM

Is it the stock roll bar and do you have any pictures of it.

*1sik52* · 10-20-2009, 09:23 AM

Quote:

Originally Posted by Gary 70 Jimmy

Is it the stock roll bar and do you have any pictures of it.

Im pretty sure it is the stock roll bar. I can get you some pics today

**yellowblazer1969** · 10-20-2009, 09:41 AM

can i get next in line for the bucket seats.

thanks, chris

10-19-2009, 06:47 PM	#1
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Parting Out 72 Blazer I picked up a 72 Blazer a few weeks ago for some parts and the rest is for sale for parts. If theres something that you may be interested in feel free to ask and I will price the parts out as asked. Thanks UPDATED LIST NO SHIPPING on Large Items Tailgate - $100.00 (Very Straight, No dents) Rear Seat - $100 Vent Windows - $40.00 Door Glass w/regulators - $40.00 Blazer Door Caps - $25.00 High Trans Hump - $40.00 Blazer Visors and Top Brackets - $50.00 Front Drive Shaft - $60.00 Limited Slip Rearend 3:73 gears - $200 Dana 44 front axle - $200 A/C Dash Radio patch panel area - $40 Original Tilt column - SOLD Blazer K5 Blazer Emblems - SOLD Blazer Top Wiring Harness - SOLD 72 Passenger Fender - SOLD Original Tow Hooks - SOLD Rear Seat Hold Downs - SOLD Stainless Steel Blazer Top Hold Down Strips - SOLD Front Bucket Seats - SOLD I will update more as I keep disassembling this thing Last edited by 1sik52; 11-10-2009 at 07:04 PM.

10-19-2009, 07:00 PM	#2
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,116	Re: Parting Out 72 Blazer I could use the rear ends of the frame horns. Cut a few inches forward of the last body bushing mounts. Shipping to 56085. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

10-19-2009, 07:23 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,715	Re: Parting Out 72 Blazer Emblems, seat hold-downs, Seat belts? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-19-2009, 10:18 PM	#6
budder71 Registered User Join Date: Jul 2009 Location: Hattiesburg Mississippi Posts: 697	Re: Parting Out 72 Blazer what about the seats ? front buckets and rear seat as well ? and the top ? single or double wall ?

10-19-2009, 10:39 PM	#8
budder71 Registered User Join Date: Jul 2009 Location: Hattiesburg Mississippi Posts: 697	Re: Parting Out 72 Blazer are the seats in decent condition ? mainly the structure of the seats, foam, springs, etc ? if so then I will take the seats to include front buckets and rear and also nuts bolts and hold downs for the seats !!! thanks again !!! Last edited by budder71; 10-19-2009 at 11:00 PM. Reason: forgot to add something

10-19-2009, 11:10 PM	#9
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Parting Out 72 Blazer Yes, seats are in good condition. Fronts even have the seat backs and back is in good condition. Too Much Stuff asked about the hold downs first so I have to give him first dibs on those, but if he doesnt take them then I will throw them in with the seats.

10-19-2009, 11:14 PM	#10
budder71 Registered User Join Date: Jul 2009 Location: Hattiesburg Mississippi Posts: 697	Re: Parting Out 72 Blazer thanks !!!!! My wife is pregnant and due any day/hour/minute so I can send money via paypal or just bring cash when I come down and pick them up... your call doesn't matter to me but I will be down there in the next 7 to 10 days to get them....

10-19-2009, 11:17 PM	#11
budder71 Registered User Join Date: Jul 2009 Location: Hattiesburg Mississippi Posts: 697	Re: Parting Out 72 Blazer what about front fenders and radiator support ?

10-19-2009, 11:39 PM	#13
budder71 Registered User Join Date: Jul 2009 Location: Hattiesburg Mississippi Posts: 697	Re: Parting Out 72 Blazer thanks again Eric !!! class act !!!

10-20-2009, 12:17 AM	#14
danw210 69 K20 Join Date: Mar 2009 Location: Elizabethtown, KY Posts: 426	Re: Parting Out 72 Blazer do you have a 4x4 dipstick?

10-20-2009, 02:16 AM	#15
american revolution Registered User Join Date: Apr 2007 Location: san francisco Posts: 446	Re: Parting Out 72 Blazer tailgate clean? any pics? how much to ship to 94015?

10-20-2009, 06:45 AM	#16
cmnov Registered User Join Date: Aug 2007 Location: lexington,ma Posts: 22	Re: Parting Out 72 Blazer lights and power to top harness, for the single wall,will take it all if you have it, colin

10-20-2009, 08:43 AM	#19
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,339	Re: Parting Out 72 Blazer How is the windshield frame?

10-20-2009, 08:54 AM	#20
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,715	Re: Parting Out 72 Blazer Chrome trans case shifter with knob? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-20-2009, 09:00 AM	#21
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Parting Out 72 Blazer Does it have a Roll bar. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396



Register or Log In To remove these advertisements.

10-20-2009, 09:19 AM	#23
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Parting Out 72 Blazer Is it the stock roll bar and do you have any pictures of it. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

10-20-2009, 09:41 AM	#25
yellowblazer1969 Registered User Join Date: Jul 2004 Location: columbia sc Posts: 387	Re: Parting Out 72 Blazer can i get next in line for the bucket seats. thanks, chris __________________ YELLOWBLAZER1969

Register or Log In To remove these advertisements.