69 blazer windshield frame. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 12-26-2009, 01:41 AM

This has very little rust. One spot as shown in the pic. The bad part... the PO cut a small slot over the pass side visor to get a stripped screw out. I don't see any issues at all on the drivers side, but the pass side will need some attention. I hope it shows OK in the pics. It will be going up for sale, but would like to find a fair price for it. Thanks. Eric

1956cameo · 12-30-2009, 03:43 AM

I don't know about the value, but I can tell you that HuggerCST has been actively looking for a good blazer windshield frame for a while. I will point him in your direction.

JimmyFloyd · 01-05-2010, 05:46 PM

i'd be interested in it if that wasn't the same spot mine needs fixed. How strong is the center section of the frame? is it soft in any spots?

**too much stuff** · 01-05-2010, 06:33 PM

I think this one is sold, but may have another coming up. Eric

12-26-2009, 01:41 AM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,714	69 blazer windshield frame. This has very little rust. One spot as shown in the pic. The bad part... the PO cut a small slot over the pass side visor to get a stripped screw out. I don't see any issues at all on the drivers side, but the pass side will need some attention. I hope it shows OK in the pics. It will be going up for sale, but would like to find a fair price for it. Thanks. Eric Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-30-2009, 03:43 AM	#2
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: 69 blazer windshield frame. I don't know about the value, but I can tell you that HuggerCST has been actively looking for a good blazer windshield frame for a while. I will point him in your direction. __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

01-05-2010, 05:46 PM	#3
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: 69 blazer windshield frame. i'd be interested in it if that wasn't the same spot mine needs fixed. How strong is the center section of the frame? is it soft in any spots? __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

01-05-2010, 06:33 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,714	Re: 69 blazer windshield frame. I think this one is sold, but may have another coming up. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.