Engine identificaton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Eric Goforth · 01-26-2003, 08:26 PM

Hello,

Does anyone know how to tell a 250 from a 292 on a 1966 Chevrolet C10? http://www.americanclassic.com/paint.htm?p1=engines has a chart, but don't say where to look for these codes. Does anyone know where these codes are, or another way to tell a 250 from a 292? I need to buy a fuel pump and they have different part numbers.

Thanks,
Eric

C10 - C90 Bill · 01-27-2003, 01:46 PM

Hey Eric, The code is on a pad next to the distributor, but there is a quicker way to tell. A 292 has taller side covers (approx 6") compared to a 230 or 250 which are approx 4" tall. Yet another way to tell is that a 292 has staggered motor mounts, where the 230 and 250 have evenly positioned ones.

01-26-2003, 08:26 PM	#1
Eric Goforth Registered User Join Date: Jan 2003 Posts: 3	Engine identificaton Hello, Does anyone know how to tell a 250 from a 292 on a 1966 Chevrolet C10? http://www.americanclassic.com/paint.htm?p1=engines has a chart, but don't say where to look for these codes. Does anyone know where these codes are, or another way to tell a 250 from a 292? I need to buy a fuel pump and they have different part numbers. Thanks, Eric

01-27-2003, 01:46 PM	#2
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,067	Hey Eric, The code is on a pad next to the distributor, but there is a quicker way to tell. A 292 has taller side covers (approx 6") compared to a 230 or 250 which are approx 4" tall. Yet another way to tell is that a 292 has staggered motor mounts, where the 230 and 250 have evenly positioned ones.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.