WY Gear Vendors overdrive complete setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 06-04-2010, 08:51 AM

Gear vendors overdrive unit. Currently in a 79 dually truck. Performs flawlessly. Rated up to 1200 HP. This one comes with the SM465 adapter, but you can get an adapter to fit nearly any trans or transfer case at www.gearvendors.com. Still in the truck so you can drive it if you are close by. Includes all wiring and electronic components to install. Driveshaft is also for sale if you plan on using in a long bed truck behind the SM465. $1500 plus $75 to crate and ship anywhere in the lower 48. Or buy the whole truck and drive it home with a strong rebuilt 454 and rebuilt front suspension for $3200. Thanks, Sharpie

**special-K** · 06-04-2010, 09:10 AM

I saw that truck and it had me thinking.Someone should buy this thing.What a deal!!!

*sharpie1972* · 06-04-2010, 09:18 AM

Hi Tim, fly in drive home! Beer and fishing while you get used to your new rig! Sharpie

jorgensensc · 06-04-2010, 12:10 PM

sharpie,
I may be interested but I need some more info. What rear end gears are in it and what size tires? Trying to make sure it will work on the Burb and Gear vendors needs to know that info to make sure it won't bog down. Also how many miles are on it? any paperwork with it? Thanks!!
Shawn

*sharpie1972* · 06-04-2010, 01:48 PM

Hi Shawn, 4.11 gears, 225/75 16" tires. No paperwork. California truck, previous owner said less than 50k on motor and Gear Vendors setup. Sharpie

GCncsuHD · 06-04-2010, 02:06 PM

Tempting...that 454 and OD would go nice in my K30. I guess that is 2wd though, so I would need an adapter for my 205.

jorgensensc · 06-04-2010, 02:47 PM

Sharpie,
Thanks for the info. After speaking to gearvendors the adapter plus wiring harness (for automatic ) would cost approx 750 plus shipping. This is a good deal for someone that wants the engine/tranny setup like it is, or has a manual sm465 already. Thanks for the info though. Good luck!
Shawn

*sharpie1972* · 06-04-2010, 02:57 PM

Shawn, no problem.
GC: I also have a 205 adapter that I could include instead of the SM465.

HuggerCST · 06-04-2010, 05:55 PM

Here's a Craigslist ad for adaptors. He has several and wants $75 for a TH400 adaptor, which is cheap IMO. Not mine, just thought it may help someone. http://sd.craigslist.org/pts/1767756858.html EDIT: My mistake, that was for a TH400 coupler.

*sharpie1972* · 06-04-2010, 06:00 PM

Thanks for the link! Sharpie

Dasani · 06-05-2010, 11:00 AM

If that was a 3+3, I'd buy it, my brother needs a big truck!

*sharpie1972* · 06-10-2010, 09:22 AM

Anyone want to split gears? Sharpie

junkyardjohn · 06-10-2010, 09:50 AM

I'VE GOT A 1980 1 TON DUALLY THAT LOOKS LIKE IT COULD BE A TWIN OF YOURS. (NO GEAR VENDORS IN IT THOUGH) IT'S BEEN A FANTASTIC TRUCK THATS A REAL PLEASURE TO DRIVE & WORK ON. IT'LL PULL ANYTHING. YOUR'S SEEMS LIKE A REAL BARGAIN.

JOHN

*sharpie1972* · 06-10-2010, 10:07 AM

Hi John, they are rock solid trucks. This one is like driving a new one when you're going down the road, and it's only 1 payment not 60! Sharpie

junkyardjohn · 06-10-2010, 12:46 PM

Quote:

Originally Posted by sharpie1972

Hi John, they are rock solid trucks. This one is like driving a new one when you're going down the road, and it's only 1 payment not 60! Sharpie

YEP-- QUITE A LUXURIOS TRUCK. COULDN'T ASK FOR ANYTHING BETTER IN A PICKUP. WHEN YOU CONSIDER IT WOULD BE ABOUT $36000 TO REPLACE IT WITH A NEW ONE OF THE SAME CALIBER, IT KINDA MAKES ME GLAD MINE WAS PAID OFF ABOUT 26 YEARS AGO.

YOUR'S WOULD MAKE SOMEONE A GREAT HAULER OR SHOP TRUCK. JOHN

*sharpie1972* · 06-18-2010, 10:12 AM

I'll be as far east as Halstad, MN on June 27th. I can deliver that far if anyone is interested. Sharpie

junkyardjohn · 06-23-2010, 12:52 PM

I CAN'T BELIEVE SOMEONE HASN'T SNATCHED THIS UP BY NOW. THIS ECONOMY MUST BE BAAAAAD ALL OVER.

HERE'S A PIC OF MINE. MY SON JUST SENT ME A DIG. CAMERA FOR FATHERS DAY & I'M TRYING TO FIGURE IT OUT. (OLD TECHNOLOGY ILLITERATE GUY HERE) TTT FOR A BARGAIN. JOHN

Vintage Windmills · 02-10-2011, 02:42 PM

Sharpie, do you still have this?

*sharpie1972* · 02-10-2011, 03:23 PM

Long gone (Saudi Arabia). Thanks, Sharpie

Vintage Windmills · 02-10-2011, 04:18 PM

Wow. The whole truck? I am looking for a gearvendors unit
Posted via Mobile Device

*sharpie1972* · 02-10-2011, 10:51 PM

Yep, the whole truck. Apparently they love square bodied big blocks over there. I thought the guy was a scammer, but he rolled in from Denver with a stack of Benjamins. I've got another GV unit for the same money. It was behind a 205 case with an automatic. In good shape. Thanks, Sharpie

Vintage Windmills · 02-10-2011, 11:51 PM

I was hoping to find one setup for a manual. I need to do some more research on hooking one up in my 67 and see about having a T221 adapter made.

*sharpie1972* · 02-10-2011, 11:53 PM

Gotcha. Good luck. Let me know if you get a lead on the T221 adapter. Sharpie

Vintage Windmills · 02-10-2011, 11:59 PM

Yep, I'm trying to figure out what all i can attach to this T221, it already got the PTO mini transfer case attached to it so whats one more gearbox gonna hurt

Lets see if i can't get 4 things to shift in this truck lol

But in all seriousness, i think the gearvendors unit would work great with the wide ratios in the SM420 and the torque of the 6 with the low rpms.

*sharpie1972* · 02-11-2011, 12:10 AM

Quote:

Originally Posted by rich67

i would love to have this to pull my trailer on long distance buys. not in the cards rite now. i suppose you would take payments on this too! lol good luck with sale sharpie, rich

Hi Rich, Bank-O-Sharpie. Low interest and great customer service! Sharpie

06-04-2010, 08:51 AM	#1
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Gear Vendors overdrive complete setup Gear vendors overdrive unit. Currently in a 79 dually truck. Performs flawlessly. Rated up to 1200 HP. This one comes with the SM465 adapter, but you can get an adapter to fit nearly any trans or transfer case at www.gearvendors.com. Still in the truck so you can drive it if you are close by. Includes all wiring and electronic components to install. Driveshaft is also for sale if you plan on using in a long bed truck behind the SM465. $1500 plus $75 to crate and ship anywhere in the lower 48. Or buy the whole truck and drive it home with a strong rebuilt 454 and rebuilt front suspension for $3200. Thanks, Sharpie Attached Images Last edited by sharpie1972; 06-04-2010 at 08:55 AM.

06-04-2010, 09:10 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Gear Vendors overdrive complete setup I saw that truck and it had me thinking.Someone should buy this thing.What a deal!!! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-04-2010, 09:18 AM	#3
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup Hi Tim, fly in drive home! Beer and fishing while you get used to your new rig! Sharpie

06-04-2010, 12:10 PM	#4
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Gear Vendors overdrive complete setup sharpie, I may be interested but I need some more info. What rear end gears are in it and what size tires? Trying to make sure it will work on the Burb and Gear vendors needs to know that info to make sure it won't bog down. Also how many miles are on it? any paperwork with it? Thanks!! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

06-04-2010, 01:48 PM	#5
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup Hi Shawn, 4.11 gears, 225/75 16" tires. No paperwork. California truck, previous owner said less than 50k on motor and Gear Vendors setup. Sharpie

06-04-2010, 02:06 PM	#6
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: Gear Vendors overdrive complete setup Tempting...that 454 and OD would go nice in my K30. I guess that is 2wd though, so I would need an adapter for my 205. __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s

06-04-2010, 02:47 PM	#7
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Gear Vendors overdrive complete setup Sharpie, Thanks for the info. After speaking to gearvendors the adapter plus wiring harness (for automatic ) would cost approx 750 plus shipping. This is a good deal for someone that wants the engine/tranny setup like it is, or has a manual sm465 already. Thanks for the info though. Good luck! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

06-04-2010, 02:57 PM	#8
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup Shawn, no problem. GC: I also have a 205 adapter that I could include instead of the SM465.

06-04-2010, 05:55 PM	#9
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Gear Vendors overdrive complete setup Here's a Craigslist ad for adaptors. He has several and wants $75 for a TH400 adaptor, which is cheap IMO. Not mine, just thought it may help someone. http://sd.craigslist.org/pts/1767756858.html EDIT: My mistake, that was for a TH400 coupler. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 06-04-2010 at 05:56 PM.

06-04-2010, 06:00 PM	#10
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup Thanks for the link! Sharpie

06-05-2010, 11:00 AM	#11
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	Re: Gear Vendors overdrive complete setup If that was a 3+3, I'd buy it, my brother needs a big truck!

06-10-2010, 09:22 AM	#12
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup Anyone want to split gears? Sharpie

06-10-2010, 09:50 AM	#13
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Gear Vendors overdrive complete setup I'VE GOT A 1980 1 TON DUALLY THAT LOOKS LIKE IT COULD BE A TWIN OF YOURS. (NO GEAR VENDORS IN IT THOUGH) IT'S BEEN A FANTASTIC TRUCK THATS A REAL PLEASURE TO DRIVE & WORK ON. IT'LL PULL ANYTHING. YOUR'S SEEMS LIKE A REAL BARGAIN. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

06-10-2010, 10:07 AM	#14
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup Hi John, they are rock solid trucks. This one is like driving a new one when you're going down the road, and it's only 1 payment not 60! Sharpie

06-18-2010, 10:12 AM	#16
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup I'll be as far east as Halstad, MN on June 27th. I can deliver that far if anyone is interested. Sharpie



Register or Log In To remove these advertisements.

06-23-2010, 12:52 PM	#17
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: Gear Vendors overdrive complete setup I CAN'T BELIEVE SOMEONE HASN'T SNATCHED THIS UP BY NOW. THIS ECONOMY MUST BE BAAAAAD ALL OVER. HERE'S A PIC OF MINE. MY SON JUST SENT ME A DIG. CAMERA FOR FATHERS DAY & I'M TRYING TO FIGURE IT OUT. (OLD TECHNOLOGY ILLITERATE GUY HERE) TTT FOR A BARGAIN. JOHN Attached Images __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-10-2011, 02:42 PM	#18
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Gear Vendors overdrive complete setup Sharpie, do you still have this? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

02-10-2011, 03:23 PM	#19
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup Long gone (Saudi Arabia). Thanks, Sharpie

02-10-2011, 04:18 PM	#20
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Gear Vendors overdrive complete setup Wow. The whole truck? I am looking for a gearvendors unit Posted via Mobile Device __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

02-10-2011, 10:51 PM	#21
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup Yep, the whole truck. Apparently they love square bodied big blocks over there. I thought the guy was a scammer, but he rolled in from Denver with a stack of Benjamins. I've got another GV unit for the same money. It was behind a 205 case with an automatic. In good shape. Thanks, Sharpie

02-10-2011, 11:51 PM	#22
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Gear Vendors overdrive complete setup I was hoping to find one setup for a manual. I need to do some more research on hooking one up in my 67 and see about having a T221 adapter made. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

02-10-2011, 11:53 PM	#23
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup Gotcha. Good luck. Let me know if you get a lead on the T221 adapter. Sharpie

02-10-2011, 11:59 PM	#24
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Gear Vendors overdrive complete setup Yep, I'm trying to figure out what all i can attach to this T221, it already got the PTO mini transfer case attached to it so whats one more gearbox gonna hurt Lets see if i can't get 4 things to shift in this truck lol But in all seriousness, i think the gearvendors unit would work great with the wide ratios in the SM420 and the torque of the 6 with the low rpms. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6 Last edited by Vintage Windmills; 02-11-2011 at 12:01 AM.

Register or Log In To remove these advertisements.