WY 292 and 250 6 cyl. parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 06-16-2010, 04:57 PM

Parting a 292 and a 250. All prices are plus shipping. Thanks, Sharpie

6 cyl. motor stands: $50.
Carb spacers 2" : $20. 3 1/2" SOLD to 70STOVEBOLT with elbow from 2incher.
292 parts:
Thermostat housing. $15.
Flywheel: $50.
Valve cover: $15.
Distributor: $20.
Alternator brackets: $20.
4 speed bell crank assembly (complete left to right): $35.
4 blade fan and spacer: $25.
2 groove upper pulley: $15.
3 groove lower pulley/balancer (rubber is starting to tear). $45.

250 parts:
Thermostat housing: $15.
Flywheel: $50.
Valve cover: $15.
Distibutor: $20.

*sharpie1972* · 06-16-2010, 04:58 PM

292 pics

*sharpie1972* · 06-16-2010, 04:59 PM

292 3 groove balancer

*sharpie1972* · 06-16-2010, 05:00 PM

250 pics

dabruce15 · 06-16-2010, 06:01 PM

Please quote shipping for the 3.5" carb spacer to 91311. Thanks!

*sharpie1972* · 06-16-2010, 06:03 PM

$10.70 shipping. Total $30.70 shipped USPS Priority. Thanks, Sharpie

dabruce15 · 06-16-2010, 11:27 PM

Quote:

Originally Posted by sharpie1972

$10.70 shipping. Total $30.70 shipped USPS Priority. Thanks, Sharpie

Thanks for the quote, but I ended up making a deal with another member. Good luck; these are good buys for someone!

69gmc292 · 06-17-2010, 12:30 AM

any of the 292 clutch parts for sale?

*sharpie1972* · 06-17-2010, 09:48 AM

Dabruce: Glad you got one.
69gmc292: Yes clutch parts are for sale. What are you needing? Sharpie

**70STOVEBOLT** · 06-17-2010, 12:20 PM

Dennis, what would the total be for the tall flame arrestor shipped to 46562?

Thanks,
Mark

*sharpie1972* · 06-17-2010, 03:49 PM

Hi Mark, $30.70 shipped. Thanks, Sharpie

**70STOVEBOLT** · 06-17-2010, 04:48 PM

If you throw in the 90 degree tube on the other end of the hose that's on the shorter one, I'll take it.

*sharpie1972* · 06-17-2010, 05:35 PM

Can do! Thanks, Sharpie

**70STOVEBOLT** · 06-18-2010, 07:16 AM

Dennis, please PM your paypal address and I will send the $$.

Thanks,
Mark

STINEY · 06-18-2010, 08:51 AM

Quote:

Originally Posted by sharpie1972

4 speed bell crank assembly (complete left to right): $35.

Distibutor: $20.

What all will you include with the bell crank assembly? Block mount to frame mount, maybe the rod to the bellhousing with the little dohickey on the end?

*sharpie1972* · 06-18-2010, 08:55 AM

Hi Stiney, Yes block mount to frame mount (that covers everything left to right), no go on the rod with dohickey I already used that! Sharpie

**70STOVEBOLT** · 06-23-2010, 12:25 PM

Dennis, I got the flame arrestor on Monday, thanks for the great deal and fast shipping!!

Mark

*sharpie1972* · 06-23-2010, 12:27 PM

Hi Mark, glad it arrived safely. Sharpie

OhNoJoe · 07-12-2010, 07:23 AM

I need a set of valve cover bolts/screws and the washers.

Also do you have the orginal carb for the 292 and the choke rod that goes to the bi-metalic strip on the exhaust manifold?
Thanks
Joe

dave666693 · 07-12-2010, 09:12 AM

Is there any hose or vent holes on the sides of the 250 valve cover? or just the 2 on top. I am looking for one with just the top holes for PVC and filler/vent.

seadonkey · 07-12-2010, 09:22 PM

wondering if you still had the mounts that bolt to the engine on that 250 available. If so how much with the ride?
Thanks

*sharpie1972* · 07-13-2010, 09:53 AM

OhNoJoe: Shoot me your address and I'll get the bolts on the way. Sorry all the carbs I have left are just for parts and I don't think I have that rod.

Dave: No holes on the sides. $15 shipping. $30 total.

Seadonkey. One is still bolted to the engine, I will check to see if I have the other.

Thanks, Sharpie

seadonkey · 07-13-2010, 01:19 PM

I guess I pretty much just need the right side (passenger side) mount if you could find it thanks

*sharpie1972* · 07-13-2010, 01:24 PM

Got it, rubber mount still attached. $25 shipped. Thanks, Sharpie

seadonkey · 07-13-2010, 07:41 PM

I'll take it, PM me with payment details.
Thanks

06-16-2010, 04:57 PM	#1
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	292 and 250 6 cyl. parts Parting a 292 and a 250. All prices are plus shipping. Thanks, Sharpie 6 cyl. motor stands: $50. Carb spacers 2" : $20. 3 1/2" SOLD to 70STOVEBOLT with elbow from 2incher. 292 parts: Thermostat housing. $15. Flywheel: $50. Valve cover: $15. Distributor: $20. Alternator brackets: $20. 4 speed bell crank assembly (complete left to right): $35. 4 blade fan and spacer: $25. 2 groove upper pulley: $15. 3 groove lower pulley/balancer (rubber is starting to tear). $45. 250 parts: Thermostat housing: $15. Flywheel: $50. Valve cover: $15. Distibutor: $20. Attached Images Last edited by sharpie1972; 06-18-2010 at 09:38 AM.

06-16-2010, 04:58 PM	#2
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 292 and 250 6 cyl. parts 292 pics Attached Images

06-16-2010, 04:59 PM	#3
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 292 and 250 6 cyl. parts 292 3 groove balancer Attached Images

06-16-2010, 05:00 PM	#4
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 292 and 250 6 cyl. parts 250 pics Attached Images

06-16-2010, 06:01 PM	#5
dabruce15 Registered User Join Date: Mar 2009 Location: Chatsworth, CA Posts: 236	Re: 292 and 250 6 cyl. parts Please quote shipping for the 3.5" carb spacer to 91311. Thanks! __________________ Beauty is in the eye of the beer-holder. Praise the lowered!

06-16-2010, 06:03 PM	#6
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 292 and 250 6 cyl. parts $10.70 shipping. Total $30.70 shipped USPS Priority. Thanks, Sharpie Last edited by sharpie1972; 06-16-2010 at 06:44 PM.

06-17-2010, 12:30 AM	#8
69gmc292 Registered User Join Date: Mar 2007 Location: tucson Posts: 71	Re: 292 and 250 6 cyl. parts any of the 292 clutch parts for sale?

06-17-2010, 09:48 AM	#9
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 292 and 250 6 cyl. parts Dabruce: Glad you got one. 69gmc292: Yes clutch parts are for sale. What are you needing? Sharpie

06-17-2010, 12:20 PM	#10
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,247	Re: 292 and 250 6 cyl. parts Dennis, what would the total be for the tall flame arrestor shipped to 46562? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-17-2010, 03:49 PM	#11
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 292 and 250 6 cyl. parts Hi Mark, $30.70 shipped. Thanks, Sharpie

06-17-2010, 04:48 PM	#12
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,247	Re: 292 and 250 6 cyl. parts If you throw in the 90 degree tube on the other end of the hose that's on the shorter one, I'll take it. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-17-2010, 05:35 PM	#13
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 292 and 250 6 cyl. parts Can do! Thanks, Sharpie

06-18-2010, 07:16 AM	#14
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,247	Re: 292 and 250 6 cyl. parts Dennis, please PM your paypal address and I will send the $$. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-18-2010, 08:55 AM	#16
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 292 and 250 6 cyl. parts Hi Stiney, Yes block mount to frame mount (that covers everything left to right), no go on the rod with dohickey I already used that! Sharpie

06-23-2010, 12:25 PM	#17
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,247	Re: 292 and 250 6 cyl. parts Dennis, I got the flame arrestor on Monday, thanks for the great deal and fast shipping!! Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear



Register or Log In To remove these advertisements.

06-23-2010, 12:27 PM	#18
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 292 and 250 6 cyl. parts Hi Mark, glad it arrived safely. Sharpie

07-12-2010, 07:23 AM	#19
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: 292 and 250 6 cyl. parts I need a set of valve cover bolts/screws and the washers. Also do you have the orginal carb for the 292 and the choke rod that goes to the bi-metalic strip on the exhaust manifold? Thanks Joe

07-12-2010, 09:12 AM	#20
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: 292 and 250 6 cyl. parts Is there any hose or vent holes on the sides of the 250 valve cover? or just the 2 on top. I am looking for one with just the top holes for PVC and filler/vent. __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

07-12-2010, 09:22 PM	#21
seadonkey Registered User Join Date: Sep 2008 Location: Port Edwards wi Posts: 49	Re: 292 and 250 6 cyl. parts wondering if you still had the mounts that bolt to the engine on that 250 available. If so how much with the ride? Thanks

07-13-2010, 09:53 AM	#22
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 292 and 250 6 cyl. parts OhNoJoe: Shoot me your address and I'll get the bolts on the way. Sorry all the carbs I have left are just for parts and I don't think I have that rod. Dave: No holes on the sides. $15 shipping. $30 total. Seadonkey. One is still bolted to the engine, I will check to see if I have the other. Thanks, Sharpie

07-13-2010, 01:19 PM	#23
seadonkey Registered User Join Date: Sep 2008 Location: Port Edwards wi Posts: 49	Re: 292 and 250 6 cyl. parts I guess I pretty much just need the right side (passenger side) mount if you could find it thanks

07-13-2010, 01:24 PM	#24
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 292 and 250 6 cyl. parts Got it, rubber mount still attached. $25 shipped. Thanks, Sharpie Attached Images

07-13-2010, 07:41 PM	#25
seadonkey Registered User Join Date: Sep 2008 Location: Port Edwards wi Posts: 49	Re: 292 and 250 6 cyl. parts I'll take it, PM me with payment details. Thanks

Register or Log In To remove these advertisements.