IA 1972 Dana 60 with 3:54 gears $100 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 09-15-2010, 04:05 PM

I have the rear end from my 72 Longhorn I'm selling. It has very minimal gear lash, brakes are free and not stuck. I don't know if the bleeders will loosen up, I have not tried. I have not driven the truck down the road so I can not tell you if it makes any weird noises. I haven't even had the cover off of it. I would like to get $100 for it. I will be traveling to Topeka Ks the weekend of the 25th of September and could bring it a long with me. Thanks Ryan.

**70cst** · 09-20-2010, 11:06 PM

bump...

**Dieselwrencher** · 10-14-2010, 03:38 PM

I will sell axles and ring and pinion with carrier seperately if someone needs them. I hate to see it go to scrap, but it just might. Surely someone needs it.

68GMCCustom · 10-14-2010, 04:56 PM

I need a Dana 60....but am too far away

**Dieselwrencher** · 10-14-2010, 06:28 PM

Quote:

Originally Posted by 68GMCCustom

I need a Dana 60....but am too far away

I actually have a uncle that is coming to Iowa from Texas and might be able to take this back with him if you're interested. He is near Lubbock I believe, and will be coming here around Thanksgiving.

68GMCCustom · 10-14-2010, 11:01 PM

I have no trouble waiting...but Lubbock is quite a ways from Dallas.
Is this a posi/locker or an open D60? To be honest...I would be refitting it with new axles and who knows what else. I need somthing tougher for my new motor then this 12 bolt and a S60 (Strange) or M60 (Moser) are both too expensive.

**Dieselwrencher** · 10-14-2010, 11:04 PM

He will have to drive through Dallas from Iowa so I doubt it'd be an issue.

I have no idea what it is as far as open or posi. Honestly if I were you I would go with a ford 9". Screw 12 bolts.

68GMCCustom · 10-14-2010, 11:20 PM

do wha?

I just can't do it.....no 9" for me. I'll take something a little bigger.

**Dieselwrencher** · 10-14-2010, 11:23 PM

Granted I spent some money on the one in my vette, but it holds boosted launches and weighs as much as your truck.

I used to eat up 12 bolts in my old 72 camaro and they pissed me off long ago!

68GMCCustom · 10-15-2010, 09:38 AM

I just can't put a ford r/e in anything I own...their products (even the good ones) disgust me. I just noticed your sig....I guess you must be a Cummins man...but to put one in a Vette...isn't that sacrilage?

**Dieselwrencher** · 10-15-2010, 03:17 PM

Sacrilage?

Heck no, only if you have never worked on a stock one I guess. I really want to do a Cuda or Challenger too. That'd have the mopar guys in an uproar then.

68GMCCustom · 10-15-2010, 08:52 PM

.......ok.......so what happened to your sig?

**Dieselwrencher** · 10-15-2010, 10:40 PM

I cleaned it up. It's a long short story.

coast2coast · 10-16-2010, 10:36 PM

I might also be interested in this if your uncle would meet me in Missouri (location depends on which route he travels).

**Dieselwrencher** · 10-18-2010, 04:27 PM

Where in Mo would you want to meet? I have to go to Lathrop some time.

**Don Brace** · 10-18-2010, 08:15 PM

Will this fit in a 71 Longhorn C30? I am in Rochester MN.
Don Brace

**Dieselwrencher** · 10-18-2010, 09:01 PM

Yes it will.

coast2coast · 10-18-2010, 09:12 PM

Quote:

Originally Posted by Dieselwrencher

Where in Mo would you want to meet? I have to go to Lathrop some time.

I was thinking that if your uncle would be going through joplin I could meet him there. Lathrop is quite a little road trip from me, but I might be able to do that. When were you thinking?

**Don Brace** · 10-19-2010, 09:30 PM

I would like to get in line for the rear end. I could drive down and pick it up.
Don Brace MN

**Dieselwrencher** · 10-19-2010, 11:12 PM

Well, if anyone wants this thing and has a way to meet me or come and get it, please speak up or it will be Don's. Thanks Ryan.

coast2coast · 10-19-2010, 11:35 PM

Don't let me stand in the way of a sale.

**Dieselwrencher** · 10-19-2010, 11:38 PM

I just want to give you all a chance and don't want to step on any toes.

Rodk65 · 10-21-2010, 02:27 PM

Hey Ryan is this sold?

**Dieselwrencher** · 10-21-2010, 02:55 PM

No, it's still for sale.

**Dieselwrencher** · 10-26-2010, 11:16 PM

Sold to Don Brace.

09-15-2010, 04:05 PM	#1
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	1972 Dana 60 with 3:54 gears $100 I have the rear end from my 72 Longhorn I'm selling. It has very minimal gear lash, brakes are free and not stuck. I don't know if the bleeders will loosen up, I have not tried. I have not driven the truck down the road so I can not tell you if it makes any weird noises. I haven't even had the cover off of it. I would like to get $100 for it. I will be traveling to Topeka Ks the weekend of the 25th of September and could bring it a long with me. Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-20-2010, 11:06 PM	#2
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: 1972 Dana 60 with 3:54 gears $100 bump... __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

10-14-2010, 03:38 PM	#3
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1972 Dana 60 with 3:54 gears $100 I will sell axles and ring and pinion with carrier seperately if someone needs them. I hate to see it go to scrap, but it just might. Surely someone needs it. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-14-2010, 04:56 PM	#4
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 1972 Dana 60 with 3:54 gears $100 I need a Dana 60....but am too far away __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

10-14-2010, 11:01 PM	#6
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 1972 Dana 60 with 3:54 gears $100 I have no trouble waiting...but Lubbock is quite a ways from Dallas. Is this a posi/locker or an open D60? To be honest...I would be refitting it with new axles and who knows what else. I need somthing tougher for my new motor then this 12 bolt and a S60 (Strange) or M60 (Moser) are both too expensive. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

10-14-2010, 11:04 PM	#7
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1972 Dana 60 with 3:54 gears $100 He will have to drive through Dallas from Iowa so I doubt it'd be an issue. I have no idea what it is as far as open or posi. Honestly if I were you I would go with a ford 9". Screw 12 bolts. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-14-2010, 11:20 PM	#8
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 1972 Dana 60 with 3:54 gears $100 do wha? I just can't do it.....no 9" for me. I'll take something a little bigger. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

10-14-2010, 11:23 PM	#9
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1972 Dana 60 with 3:54 gears $100 Granted I spent some money on the one in my vette, but it holds boosted launches and weighs as much as your truck. I used to eat up 12 bolts in my old 72 camaro and they pissed me off long ago! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-15-2010, 09:38 AM	#10
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 1972 Dana 60 with 3:54 gears $100 I just can't put a ford r/e in anything I own...their products (even the good ones) disgust me. I just noticed your sig....I guess you must be a Cummins man...but to put one in a Vette...isn't that sacrilage? __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

10-15-2010, 03:17 PM	#11
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1972 Dana 60 with 3:54 gears $100 Sacrilage? Heck no, only if you have never worked on a stock one I guess. I really want to do a Cuda or Challenger too. That'd have the mopar guys in an uproar then. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-15-2010, 08:52 PM	#12
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 1972 Dana 60 with 3:54 gears $100 .......ok.......so what happened to your sig? __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

10-15-2010, 10:40 PM	#13
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1972 Dana 60 with 3:54 gears $100 I cleaned it up. It's a long short story. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-16-2010, 10:36 PM	#14
coast2coast Registered User Join Date: Oct 2006 Location: Strafford Missouri Posts: 217	Re: 1972 Dana 60 with 3:54 gears $100 I might also be interested in this if your uncle would meet me in Missouri (location depends on which route he travels).

10-18-2010, 04:27 PM	#15
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1972 Dana 60 with 3:54 gears $100 Where in Mo would you want to meet? I have to go to Lathrop some time. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-18-2010, 08:15 PM	#16
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: 1972 Dana 60 with 3:54 gears $100 Will this fit in a 71 Longhorn C30? I am in Rochester MN. Don Brace __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.



Register or Log In To remove these advertisements.

10-18-2010, 09:01 PM	#17
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1972 Dana 60 with 3:54 gears $100 Yes it will. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-19-2010, 09:30 PM	#19
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: 1972 Dana 60 with 3:54 gears $100 I would like to get in line for the rear end. I could drive down and pick it up. Don Brace MN __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

10-19-2010, 11:12 PM	#20
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1972 Dana 60 with 3:54 gears $100 Well, if anyone wants this thing and has a way to meet me or come and get it, please speak up or it will be Don's. Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-19-2010, 11:35 PM	#21
coast2coast Registered User Join Date: Oct 2006 Location: Strafford Missouri Posts: 217	Re: 1972 Dana 60 with 3:54 gears $100 Don't let me stand in the way of a sale.

10-19-2010, 11:38 PM	#22
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1972 Dana 60 with 3:54 gears $100 I just want to give you all a chance and don't want to step on any toes. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-21-2010, 02:27 PM	#23
Rodk65 Registered User Join Date: Apr 2010 Location: Holmen, WI Posts: 212	Re: 1972 Dana 60 with 3:54 gears $100 Hey Ryan is this sold? __________________ ROD 1969 K10 4x4 Short Fleet. Tuned Port Injection 350/700R4, Cruise, tilt and factory A/C. 1971 C20 Camper Special. 350/350. SOLD 2002 Chevy Tahoe LT

10-21-2010, 02:55 PM	#24
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1972 Dana 60 with 3:54 gears $100 No, it's still for sale. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-26-2010, 11:16 PM	#25
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: 1972 Dana 60 with 3:54 gears $100 Sold to Don Brace. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

Register or Log In To remove these advertisements.