AR WTB , TBI aftermarket intake, sb chevy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 10-22-2010, 05:55 PM

i would like to buy an aluminum intake (elderbrock or holley) for a TBI motor, 350 small block chevy

**67cheby** · 10-22-2010, 05:56 PM

i would like to buy an aftermarket intake for my TBI 350 let me know what you got

ksbrktracer · 10-22-2010, 09:09 PM

I have an 87 and newer edelbrock tbi intake for sale , I think it is part # 3704 . I would take 150.00 + shipping for it. I also have a distributor , sensors and throttle body also that I would sell .

70BLAZERX2 · 10-23-2010, 08:35 AM

you can run a performer rpm intake for the 87 up...4bbl with more options..with this from trans dapt

I had one of these and the rpm intake on a 93 roadmaster wagon...wow what i difference in power..

The adapter is around 45 bucks. Just google trans dapt tbi adapter..

Name: ada.bmp
Views: 393
Size: 18.8 KB

**67cheby** · 10-23-2010, 09:06 AM

Quote:

Originally Posted by ksbrktracer

I have an 87 and newer edelbrock tbi intake for sale , I think it is part # 3704 . I would take 150.00 + shipping for it. I also have a distributor , sensors and throttle body also that I would sell .

i am interested, i was at the shootout last sat wish i would have been thinking about this then, could you send me a pic ??

**67cheby** · 10-23-2010, 09:08 AM

Quote:

Originally Posted by 70BLAZERX2

you can run a performer rpm intake for the 87 up...4bbl with more options..with this from trans dapt

I had one of these and the rpm intake on a 93 roadmaster wagon...wow what i difference in power..

The adapter is around 45 bucks. Just google trans dapt tbi adapter..

Attachment 647058

thanks for the info , so you do think its worth upgrading over the factory intake ?? you can tell the power diff??

ksbrktracer · 10-23-2010, 11:10 AM

I'll get you a picture and post a little bit later ..... its packed away, I just moved ....

70BLAZERX2 · 10-23-2010, 11:44 AM

I even put the "ramjet 350" roller cam in it..and it did very good...only mod i had to do was adjust the fuel pressure up 2 psi..and it was right..There is an adjustable TBI fuel regualtor available..you can modify these but not to much or computer goes into a fit.

yes,you will get more flow out of the rpm intake..than a stock one..here is the wagon..someone offered me 5,000 for it...so i sold it...had 180,000 miles on the body

Name: e2.JPG
Views: 325
Size: 58.6 KB

**67cheby** · 10-23-2010, 04:45 PM

you might as well just sell me the intake for $100.... i have got to be the only joker out there running an old school fuel injection set up like this !!! go ahead help a brother out !!

**67cheby** · 11-01-2010, 02:42 PM

ttt . anyone have anything?

ksbrktracer · 11-01-2010, 06:26 PM

I really do have one, I just cant put my hands on it .... I will let you know if I find it . Hopefully something shows up for you though ... got any paint on that thing yet ?

**67cheby** · 11-01-2010, 06:40 PM

ok on the intake, no on the paint ..painter is at SEMA all week!!

68chevyfuelie · 11-02-2010, 04:38 PM

Mines an Edelbrock 2104, supposed to fit the '87-95 heads. I was planning on running an '87 and up motor with this intake, and either carb it or adapt it back to TBI.

**67cheby** · 11-02-2010, 04:53 PM

you would have to buy an adapter plate to run it with a TBI

**CUSTOM/10** · 11-02-2010, 06:47 PM

I have an almost bran-new Edelbrock performer TBI intake and a Holley 2" bore TBI with the ECM ( No Harness ) that I maybe interested in selling. I got the set-up on a motor I bought, it has been run for a short time but never even driven. I've changed directions and have a 383 that I'm using now.
$350 for everything !

I don't want to split it up though.

LMK
Gary

**67cheby** · 11-03-2010, 09:56 AM

do you have pics and part #'s

**CUSTOM/10** · 11-03-2010, 10:12 AM

Try this link or go t 4x4 projects and search Divorce Therapy and go to the 2nd page. These are the only pics right now. I would have to get #'s

http://67-72chevytrucks.com/vboard/s...=259859&page=2

**67cheby** · 11-03-2010, 10:21 AM

is your ecm stock ?? or does it match the throttle body ??, will my wiring harness that i have plug in to all this ??/

**CUSTOM/10** · 11-03-2010, 10:27 AM

As far as I know It's a stock ECM. Not sure about your harness, and I really don't know much about the set-up or TBI's in general. It came on this motor I bought and was told it was new at that time. About 2yrs ago.

**67cheby** · 11-03-2010, 10:41 AM

i have a nice truck tilt colum with new bearing in the end , new indicator, and billet turn sig, tilt lever, hazard , and shifter, interested in a trade ??

**t korinek** · 11-03-2010, 10:52 AM

I have an edelbrock performer for the TBI setup.
Tom

**67cheby** · 11-03-2010, 11:38 AM

Quote:

Originally Posted by 67cheby

i have a nice truck tilt colum with new bearing in the end , new indicator, and billet turn sig, tilt lever, hazard , and shifter, interested in a trade ??

custom/10 here are some pics of the column

**t korinek** · 11-03-2010, 02:36 PM

edelbrock 3704 $125 shipped in good shape
pics of ac controller

**67cheby** · 11-03-2010, 02:46 PM

let me see if customc/10 is interested in trading if not , i will prob be interested, the ac controller looks perfect, is it as nice as it looks ?? if it is i will take the controller just let me wait and see what to do on the intake , thanks

**CUSTOM/10** · 11-03-2010, 04:42 PM

Possibly interested in the trade! I'll get back to you later tonight or tomorrow, Work is crazy right now.

Gary

10-22-2010, 05:55 PM	#1
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	WTB , TBI aftermarket intake, sb chevy i would like to buy an aluminum intake (elderbrock or holley) for a TBI motor, 350 small block chevy __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-22-2010, 05:56 PM	#2
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB , TBI aftermarket intake, sb chevy i would like to buy an aftermarket intake for my TBI 350 let me know what you got __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-22-2010, 09:09 PM	#3
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: WTB , TBI aftermarket intake, sb chevy I have an 87 and newer edelbrock tbi intake for sale , I think it is part # 3704 . I would take 150.00 + shipping for it. I also have a distributor , sensors and throttle body also that I would sell .

10-23-2010, 08:35 AM	#4
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,311	Re: WTB , TBI aftermarket intake, sb chevy you can run a performer rpm intake for the 87 up...4bbl with more options..with this from trans dapt I had one of these and the rpm intake on a 93 roadmaster wagon...wow what i difference in power.. The adapter is around 45 bucks. Just google trans dapt tbi adapter.. Last edited by 70BLAZERX2; 10-23-2010 at 08:36 AM.

10-23-2010, 11:10 AM	#7
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: WTB , TBI aftermarket intake, sb chevy I'll get you a picture and post a little bit later ..... its packed away, I just moved ....

10-23-2010, 11:44 AM	#8
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,311	Re: WTB , TBI aftermarket intake, sb chevy I even put the "ramjet 350" roller cam in it..and it did very good...only mod i had to do was adjust the fuel pressure up 2 psi..and it was right..There is an adjustable TBI fuel regualtor available..you can modify these but not to much or computer goes into a fit. yes,you will get more flow out of the rpm intake..than a stock one..here is the wagon..someone offered me 5,000 for it...so i sold it...had 180,000 miles on the body

10-23-2010, 04:45 PM	#9
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB , TBI aftermarket intake, sb chevy you might as well just sell me the intake for $100.... i have got to be the only joker out there running an old school fuel injection set up like this !!! go ahead help a brother out !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-01-2010, 02:42 PM	#10
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB , TBI aftermarket intake, sb chevy ttt . anyone have anything? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-01-2010, 06:26 PM	#11
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: WTB , TBI aftermarket intake, sb chevy I really do have one, I just cant put my hands on it .... I will let you know if I find it . Hopefully something shows up for you though ... got any paint on that thing yet ?

11-01-2010, 06:40 PM	#12
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB , TBI aftermarket intake, sb chevy ok on the intake, no on the paint ..painter is at SEMA all week!! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-02-2010, 04:38 PM	#13
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: WTB , TBI aftermarket intake, sb chevy Mines an Edelbrock 2104, supposed to fit the '87-95 heads. I was planning on running an '87 and up motor with this intake, and either carb it or adapt it back to TBI. Attached Images

11-02-2010, 04:53 PM	#14
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB , TBI aftermarket intake, sb chevy you would have to buy an adapter plate to run it with a TBI __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-02-2010, 06:47 PM	#15
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,801	Re: WTB , TBI aftermarket intake, sb chevy I have an almost bran-new Edelbrock performer TBI intake and a Holley 2" bore TBI with the ECM ( No Harness ) that I maybe interested in selling. I got the set-up on a motor I bought, it has been run for a short time but never even driven. I've changed directions and have a 383 that I'm using now. $350 for everything ! I don't want to split it up though. LMK Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

11-03-2010, 09:56 AM	#16
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB , TBI aftermarket intake, sb chevy do you have pics and part #'s __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-03-2010, 10:12 AM	#17
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,801	Re: WTB , TBI aftermarket intake, sb chevy Try this link or go t 4x4 projects and search Divorce Therapy and go to the 2nd page. These are the only pics right now. I would have to get #'s http://67-72chevytrucks.com/vboard/s...=259859&page=2 __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859



Register or Log In To remove these advertisements.

11-03-2010, 10:21 AM	#18
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB , TBI aftermarket intake, sb chevy is your ecm stock ?? or does it match the throttle body ??, will my wiring harness that i have plug in to all this ??/ __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-03-2010, 10:27 AM	#19
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,801	Re: WTB , TBI aftermarket intake, sb chevy As far as I know It's a stock ECM. Not sure about your harness, and I really don't know much about the set-up or TBI's in general. It came on this motor I bought and was told it was new at that time. About 2yrs ago. __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

11-03-2010, 10:41 AM	#20
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB , TBI aftermarket intake, sb chevy i have a nice truck tilt colum with new bearing in the end , new indicator, and billet turn sig, tilt lever, hazard , and shifter, interested in a trade ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172 Last edited by 67cheby; 11-03-2010 at 11:12 AM.

11-03-2010, 10:52 AM	#21
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: WTB , TBI aftermarket intake, sb chevy I have an edelbrock performer for the TBI setup. Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ! Last edited by t korinek; 11-03-2010 at 02:28 PM.

11-03-2010, 02:36 PM	#23
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: WTB , TBI aftermarket intake, sb chevy edelbrock 3704 $125 shipped in good shape pics of ac controller Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

11-03-2010, 02:46 PM	#24
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB , TBI aftermarket intake, sb chevy let me see if customc/10 is interested in trading if not , i will prob be interested, the ac controller looks perfect, is it as nice as it looks ?? if it is i will take the controller just let me wait and see what to do on the intake , thanks __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-03-2010, 04:42 PM	#25
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,801	Re: WTB , TBI aftermarket intake, sb chevy Possibly interested in the trade! I'll get back to you later tonight or tomorrow, Work is crazy right now. Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

Register or Log In To remove these advertisements.