TX parting 67-72 chevy parts trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rio · 11-20-2010, 02:46 PM

parting 67-72 chevy parts trucks let me know what you need. and i'll price the part. or make me a offer.

rio · 11-20-2010, 02:47 PM

pic.

budnikguy · 11-20-2010, 03:25 PM

are any of these 71/72 1/2 ton? I am looking for brake stuff, proportioning valve for disc/drum, brake lines, etc.

Fesser · 11-20-2010, 04:23 PM

How about a working heater control setup (without AC) that would work in a 72 ...and the screws that go through the top of the inside of the door into the bottom of the wing window on the 72 (there is one on each side)...and the little plastic things the screws go through if it has those (might only be on Blazers, I don't know). To 94559

ckexswb · 11-20-2010, 04:23 PM

How about the exhaust manifold shield with tube and the top alternator bracket. shipped to 90277

MVHandy · 11-20-2010, 06:11 PM

Could use the ashtray from the Ochre and White truck. I will offer $15 including shipping to 08816

1956cameo · 11-20-2010, 06:20 PM

Do the trucks have the original rims? I need three 5 lug 15x6 rims; and five six lug 15x6 rims. Let me know what you would want for the rims. If the price sounds good I could pick the rims up in the next week or two.

Also I would like to get in line for the breather set up (base and tube going to exhaust, and exhaust) in the second picture. Also I am interested in the distributor, alternator brackets, throttle linkage, water pump pulley, and probably other little things in the second pic pending price. I also need a complete set of original A/C brackets if any of your trucks have them pending price. I will look and see what other little parts that I may need that I could buy if I go up to Brenham for the other stuff.

vanceman · 11-20-2010, 06:22 PM

Got any good doors???

raider65 · 11-20-2010, 07:37 PM

Looking for a brake booster for a 1/2 as well put me in line..also the blue grill bowtie pending price and condition and the yellow AC vents

rio · 11-20-2010, 07:49 PM

are any of these 71/72 1/2 ton? I am looking for brake stuff, proportioning valve for disc/drum, brake lines, etc.]

I'll check tuesday

rio · 11-20-2010, 07:56 PM

How about a working heater control setup (without AC) that would work in a 72 ...and the screws that go through the top of the inside of the door into the bottom of the wing window on the 72 (there is one on each side)...and the little plastic things the screws go through if it has those (might only be on Blazers, I don't know). To 94559

I have one heater control . no broken levers.

I'll check on the screws.

rio · 11-20-2010, 07:57 PM

Anyone interested can make an offer & we'll go from there.
Rio

rio · 11-20-2010, 07:59 PM

How about the exhaust manifold shield with tube and the top alternator bracket. shipped to 90277

I'll check as soon as I can.

rio

rio · 11-20-2010, 08:09 PM

1956cameo;4304936]Do the trucks have the original rims? I need three 5 lug 15x6 rims; and five six lug 15x6 rims. Let me know what you would want for the rims. If the price sounds good I could pick the rims up in the next week or two.

Also I would like to get in line for the breather set up (base and tube going to exhaust, and exhaust) in the second picture. Also I am interested in the distributor, alternator brackets, throttle linkage, water pump pulley, and probably other little things in the second pic pending price. I also need a complete set of original A/C brackets if any of your trucks have them pending price. I will look and see what other little parts that I may need that I could buy if I go up to Brenham for the other stuff.

I'll check as soon as I can.

rio · 11-20-2010, 08:09 PM

Got any good doors???

no.

rio · 11-20-2010, 08:10 PM

Looking for a brake booster for a 1/2 as well put me in line..also the blue grill bowtie pending price and condition and the yellow AC vents

I'll check as soon as I can.

**nightmare** · 11-20-2010, 10:52 PM

got any 5-lug 3.73 posi axles?

jmedero · 11-20-2010, 10:58 PM

Looking for front bumpers 67-70. Painted or chrome.
Posted via Mobile Device

*Puropedo* · 11-20-2010, 11:55 PM

Hows the driver side fender on the ochre/white truck?

rio · 11-21-2010, 12:16 AM

Hows the driver side fender on the ochre/white truck?

no good.
rio

rio · 11-21-2010, 12:17 AM

got any 5-lug 3.73 posi axles?

no.

silver7 · 11-21-2010, 12:21 AM

If you have any 71-72 K10s I'm interested in a decent set of fron disc brake dust shields.

tanman722001 · 11-21-2010, 12:46 AM

do you have any front bumper brackets all 4?

**68350** · 11-21-2010, 01:44 AM

any custom camper or sierra/sierra grande emblems? thanks

dadsworktruck · 11-21-2010, 02:09 AM

how about power steering gearbox and power steering pump with all mounting brackets for sbc shipped to 29702,,,thanks

11-20-2010, 02:46 PM	#1
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	parting 67-72 chevy parts trucks parting 67-72 chevy parts trucks let me know what you need. and i'll price the part. or make me a offer. Attached Images __________________ 1970 1/2 ton swb

11-20-2010, 02:47 PM	#2
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks pic. Attached Images __________________ 1970 1/2 ton swb

11-20-2010, 03:25 PM	#3
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: parting 67-72 chevy parts trucks are any of these 71/72 1/2 ton? I am looking for brake stuff, proportioning valve for disc/drum, brake lines, etc.

11-20-2010, 04:23 PM	#4
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: parting 67-72 chevy parts trucks How about a working heater control setup (without AC) that would work in a 72 ...and the screws that go through the top of the inside of the door into the bottom of the wing window on the 72 (there is one on each side)...and the little plastic things the screws go through if it has those (might only be on Blazers, I don't know). To 94559

11-20-2010, 04:23 PM	#5
ckexswb 67-72=-5 Join Date: Jun 2007 Location: calif/ beach Posts: 807	Re: parting 67-72 chevy parts trucks How about the exhaust manifold shield with tube and the top alternator bracket. shipped to 90277

11-20-2010, 06:11 PM	#6
MVHandy Registered User Join Date: Jun 2009 Location: East Brunswick, NJ Posts: 70	Re: parting 67-72 chevy parts trucks Could use the ashtray from the Ochre and White truck. I will offer $15 including shipping to 08816

11-20-2010, 06:20 PM	#7
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: parting 67-72 chevy parts trucks Do the trucks have the original rims? I need three 5 lug 15x6 rims; and five six lug 15x6 rims. Let me know what you would want for the rims. If the price sounds good I could pick the rims up in the next week or two. Also I would like to get in line for the breather set up (base and tube going to exhaust, and exhaust) in the second picture. Also I am interested in the distributor, alternator brackets, throttle linkage, water pump pulley, and probably other little things in the second pic pending price. I also need a complete set of original A/C brackets if any of your trucks have them pending price. I will look and see what other little parts that I may need that I could buy if I go up to Brenham for the other stuff. __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry Last edited by 1956cameo; 11-20-2010 at 06:46 PM.

11-20-2010, 06:22 PM	#8
vanceman Registered User Join Date: Mar 2009 Location: Central Texas Posts: 140	Re: parting 67-72 chevy parts trucks Got any good doors???

11-20-2010, 07:37 PM	#9
raider65 Registered User Join Date: Sep 2010 Location: Brownsville, Texas Posts: 240	Re: parting 67-72 chevy parts trucks Looking for a brake booster for a 1/2 as well put me in line..also the blue grill bowtie pending price and condition and the yellow AC vents __________________ It's not rust...It's character!

11-20-2010, 07:49 PM	#10
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks are any of these 71/72 1/2 ton? I am looking for brake stuff, proportioning valve for disc/drum, brake lines, etc.] I'll check tuesday __________________ 1970 1/2 ton swb

11-20-2010, 07:56 PM	#11
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks How about a working heater control setup (without AC) that would work in a 72 ...and the screws that go through the top of the inside of the door into the bottom of the wing window on the 72 (there is one on each side)...and the little plastic things the screws go through if it has those (might only be on Blazers, I don't know). To 94559 I have one heater control . no broken levers. I'll check on the screws. __________________ 1970 1/2 ton swb

11-20-2010, 07:57 PM	#12
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks Anyone interested can make an offer & we'll go from there. Rio __________________ 1970 1/2 ton swb

11-20-2010, 07:59 PM	#13
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks How about the exhaust manifold shield with tube and the top alternator bracket. shipped to 90277 I'll check as soon as I can. rio __________________ 1970 1/2 ton swb

11-20-2010, 08:09 PM	#14
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks 1956cameo;4304936]Do the trucks have the original rims? I need three 5 lug 15x6 rims; and five six lug 15x6 rims. Let me know what you would want for the rims. If the price sounds good I could pick the rims up in the next week or two. Also I would like to get in line for the breather set up (base and tube going to exhaust, and exhaust) in the second picture. Also I am interested in the distributor, alternator brackets, throttle linkage, water pump pulley, and probably other little things in the second pic pending price. I also need a complete set of original A/C brackets if any of your trucks have them pending price. I will look and see what other little parts that I may need that I could buy if I go up to Brenham for the other stuff. I'll check as soon as I can. __________________ 1970 1/2 ton swb

11-20-2010, 08:10 PM	#16
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks Looking for a brake booster for a 1/2 as well put me in line..also the blue grill bowtie pending price and condition and the yellow AC vents I'll check as soon as I can. __________________ 1970 1/2 ton swb



Register or Log In To remove these advertisements.

11-20-2010, 10:58 PM	#18
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: parting 67-72 chevy parts trucks Looking for front bumpers 67-70. Painted or chrome. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

11-20-2010, 11:55 PM	#19
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: parting 67-72 chevy parts trucks Hows the driver side fender on the ochre/white truck?

11-21-2010, 12:16 AM	#20
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks Hows the driver side fender on the ochre/white truck? no good. rio __________________ 1970 1/2 ton swb

11-21-2010, 12:17 AM	#21
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks got any 5-lug 3.73 posi axles? no. __________________ 1970 1/2 ton swb

11-21-2010, 12:21 AM	#22
silver7 Registered User Join Date: Jul 2009 Location: High Point, NC Posts: 613	Re: parting 67-72 chevy parts trucks If you have any 71-72 K10s I'm interested in a decent set of fron disc brake dust shields. __________________ Shawn 1971 C10 4x4

11-21-2010, 12:46 AM	#23
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: parting 67-72 chevy parts trucks do you have any front bumper brackets all 4? __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-21-2010, 01:44 AM	#24
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: parting 67-72 chevy parts trucks any custom camper or sierra/sierra grande emblems? thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

11-21-2010, 02:09 AM	#25
dadsworktruck Registered User Join Date: Jul 2009 Location: blacksburg,s.c. Posts: 155	Re: parting 67-72 chevy parts trucks how about power steering gearbox and power steering pump with all mounting brackets for sbc shipped to 29702,,,thanks

Register or Log In To remove these advertisements.