Crew cab need help wiring power windows and locks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gavinmosher · 11-25-2010, 01:55 AM

Ok guys my crew cab had standard windows and locks well I bought some doors off of a burb which had power windows and locks well I got the doors installed but am kind of at a loss at what to do to get them to work. Anyone who can help with the wire colors where to run the wires and how to get them through the a pillars thanks anyone
Posted via Mobile Device

BIG V · 11-25-2010, 01:58 AM

save yourself the problem go to the nearest pick in pull and pull the remainder of the harness

gavinmosher · 11-29-2010, 12:19 PM

Is there any other ideas because i wont lie to anyone lol these trucks get crushed around here and not that many are left in the salvage yards.... also there is only one pick and pull around here noone else will let you browse through the lot...

dropd80s · 11-29-2010, 12:41 PM

The wiring on these trucks is very simple, the best thing to do would be get the rest of the origional harness. Suburbans are the same and those are being parted out all the time around here. If you cant find one get your self a haynes manual. They have all the trucks curcuits layed out toward the end of the book and you can piece in what you dont have.

gavinmosher · 11-29-2010, 12:51 PM

yeah i have looked for burb's around here the last one i knew of just got crushed and it was in mint condition inside and out the only thing missing was the core support which is on my shortbed lol

11-25-2010, 01:55 AM	#1
gavinmosher Registered User Join Date: Feb 2010 Location: carthage missouri Posts: 81	Crew cab need help wiring power windows and locks Ok guys my crew cab had standard windows and locks well I bought some doors off of a burb which had power windows and locks well I got the doors installed but am kind of at a loss at what to do to get them to work. Anyone who can help with the wire colors where to run the wires and how to get them through the a pillars thanks anyone Posted via Mobile Device

11-25-2010, 01:58 AM	#2
BIG V Registered User Join Date: Jul 2009 Location: Northern California Posts: 411	Re: Crew cab need help wiring power windows and locks save yourself the problem go to the nearest pick in pull and pull the remainder of the harness __________________ 1991 Chevy suburban 3/4 ton 4x 4:56 and pulls great 1979 Chevy 1/2 ton long bed diesel 1974 Chevy crew cab short bed 3/4 ton 4x4 project 1991 Chevy suburban 2wd 1984 Chevy suburban 3/4 ton 4x 6.5 detroit with turbo 1961 Chevy pickup 1/2 ton 2wd 1975 gmc crew cab short bed 2wd

11-29-2010, 12:19 PM	#3
gavinmosher Registered User Join Date: Feb 2010 Location: carthage missouri Posts: 81	Re: Crew cab need help wiring power windows and locks Is there any other ideas because i wont lie to anyone lol these trucks get crushed around here and not that many are left in the salvage yards.... also there is only one pick and pull around here noone else will let you browse through the lot...

11-29-2010, 12:41 PM	#4
dropd80s Registered User Join Date: Mar 2003 Location: wichita falls tx Posts: 429	Re: Crew cab need help wiring power windows and locks The wiring on these trucks is very simple, the best thing to do would be get the rest of the origional harness. Suburbans are the same and those are being parted out all the time around here. If you cant find one get your self a haynes manual. They have all the trucks curcuits layed out toward the end of the book and you can piece in what you dont have.

11-29-2010, 12:51 PM	#5
gavinmosher Registered User Join Date: Feb 2010 Location: carthage missouri Posts: 81	Re: Crew cab need help wiring power windows and locks yeah i have looked for burb's around here the last one i knew of just got crushed and it was in mint condition inside and out the only thing missing was the core support which is on my shortbed lol



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.