CA Parting 71 3/4 ton 2wd - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 02-09-2011, 11:12 AM

Not much here. The back end will be used for a bed trailer.

brake booster, brackets, prop valve- $50 plus shipping

heater box (engine side)- $40 plus shipping

gas pedal assembly with cable- $32 shipped

Z bar- $15 plus shipping

If you see anything you want, please ask in thread.
Thanks, Ray

KrazyRay · 02-09-2011, 11:14 AM

pics

**bignbad** · 02-09-2011, 11:51 AM

i'm interested in the drives side seat belt.Does it retract?how much shipped to 17034?

Baggerjohn · 02-09-2011, 12:02 PM

Will the heater box and controls fit my 67 C-10? Are the gauge cluster and cig lighter available? What is the condition of the bench seat? How much? Thanks

shovithead · 02-09-2011, 08:27 PM

I am interested in the heater controler on the dash. With the cables if they are there. Shipping to 32927

KrazyRay · 02-10-2011, 01:05 AM

bignbad- $20 shipped on the seat belt...will check retracting Thurs.

Baggerjohn- the heater box will fit a 67, 67-68 controls are different (don't know if they will work) $25, I have several gauge clusters that fit 67-68...$20, $5 on cig lighter, the seat is junk. $82 shipped for the box, gauge cluster, and cig lighter.

shovithead- $36 shipped on heater controls if it gets to you.

Thanks, Ray

Jerry Jones · 02-10-2011, 02:41 AM

How is the rad core support, drivers inner and outer fender, and front bumper supports?

KrazyRay · 02-10-2011, 10:32 AM

Quote:

Originally Posted by Jerry Jones

How is the rad core support, drivers inner and outer fender, and front bumper supports?

They are in bad shape. I have several sets of 71-72 bumper brackets $20 per set.
Thanks, Ray

Jerry Jones · 02-10-2011, 11:12 AM

Thanks Ray, I will let you know, if all that stuff was good I would have come up to get it.

Junkpyl · 02-10-2011, 11:19 AM

how is the grill other than that spot by the hood latch? how much for shipping to 71953?

projectjimmie68 · 02-10-2011, 02:24 PM

Is the gauge cluster still available? If so how much plus shipping to zip 32136? Thanks Projectjimmie

villa 66 · 02-10-2011, 08:25 PM

How much for both spindels,rotors,calipers shipped to 78570? Thanks

villa 66 · 02-10-2011, 08:31 PM

What would the shipping be for the booster,valve and bracs. too 78570. Thanks

KrazyRay · 02-11-2011, 12:13 AM

Junkpyl- The grille is no good...many cracks and broken tabs

Projectjimmie68- $34 shipped on a good cluster

Villa 66- Too spendy to ship spindles, rotors. You might try TEXAS SQUARE BODIES in the 73-87 parts section. Booster, brackets, and prop valve $70 shipped

Thanks, Ray

**bignbad** · 02-11-2011, 09:51 AM

still interested in the seatbelt,did you happen to check to see if it retracts?

projectjimmie68 · 02-11-2011, 12:31 PM

Would 25 shipped buy the gauge cluster?

**Tmend** · 02-11-2011, 02:26 PM

Are you selling the bed and if you are how much and can I get some pics thanks
Posted via Mobile Device

fasttech · 02-11-2011, 07:45 PM

Do you have a glove box door? If so how much are you asking?

KrazyRay · 02-12-2011, 03:27 AM

Quote:

Originally Posted by bignbad

still interested in the seatbelt,did you happen to check to see if it retracts?

The seat belt takes some wiggling to retract.

KrazyRay · 02-12-2011, 03:32 AM

Quote:

Originally Posted by fasttech

Do you have a glove box door? If so how much are you asking?

projectjimmie68- I'll go $30 shipped

Tmend- sorry, the bed is not for sale

fasttech- $20 shipped on the glove box door

Thanks, Ray

tabarcus · 02-12-2011, 02:25 PM

How much for the Heater Control Unit?

KrazyRay · 02-12-2011, 06:55 PM

Quote:

Originally Posted by shovithead

I am interested in the heater controler on the dash. With the cables if they are there. Shipping to 32927

I haven't heard back from Baggerjohn. You are up on the heater controls.
Thanks, Ray

tabarcus is next up after shovithead.

**bignbad** · 02-12-2011, 08:40 PM

I'll take the seat belt,Pm payment info

tabarcus · 02-12-2011, 10:55 PM

Quote:

Originally Posted by KrazyRay

I haven't heard back from Baggerjohn. You are up on the heater controls.
Thanks, Ray

tabarcus is next up after shovithead.

If Baggerjohn passes. I will need a quote for the unit and shipping costs to zip 22405.

**67sss** · 02-12-2011, 11:01 PM

how much for the VW in 3rd pic? Cab have a title/if it for sale/how much? more pics please.

02-09-2011, 11:12 AM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting 71 3/4 ton 2wd Not much here. The back end will be used for a bed trailer. brake booster, brackets, prop valve- $50 plus shipping heater box (engine side)- $40 plus shipping gas pedal assembly with cable- $32 shipped Z bar- $15 plus shipping If you see anything you want, please ask in thread. Thanks, Ray Attached Images

02-09-2011, 11:14 AM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 71 3/4 ton 2wd pics Attached Images

02-09-2011, 11:51 AM	#3
bignbad Registered User Join Date: Jan 2009 Location: highspire,pa Posts: 423	Re: Parting 71 3/4 ton 2wd i'm interested in the drives side seat belt.Does it retract?how much shipped to 17034? __________________ '72 chevy k20 '06 H-D Springer softail http://www.bluemooncruisers.com/ http://www.enginecycle.com/ ~Eric

02-09-2011, 12:02 PM	#4
Baggerjohn Registered User Join Date: Jan 2011 Location: Bullhead City, AZ Posts: 60	Re: Parting 71 3/4 ton 2wd Will the heater box and controls fit my 67 C-10? Are the gauge cluster and cig lighter available? What is the condition of the bench seat? How much? Thanks __________________ "Arrive, Raise Hell, Create Confusion, Leave".

02-09-2011, 08:27 PM	#5
shovithead Registered User Join Date: Jan 2011 Location: Cocoa, Florida Posts: 17	Re: Parting 71 3/4 ton 2wd I am interested in the heater controler on the dash. With the cables if they are there. Shipping to 32927

02-10-2011, 01:05 AM	#6
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 71 3/4 ton 2wd bignbad- $20 shipped on the seat belt...will check retracting Thurs. Baggerjohn- the heater box will fit a 67, 67-68 controls are different (don't know if they will work) $25, I have several gauge clusters that fit 67-68...$20, $5 on cig lighter, the seat is junk. $82 shipped for the box, gauge cluster, and cig lighter. shovithead- $36 shipped on heater controls if it gets to you. Thanks, Ray

02-10-2011, 02:41 AM	#7
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,408	Re: Parting 71 3/4 ton 2wd How is the rad core support, drivers inner and outer fender, and front bumper supports? __________________ RIP El Jay! Love you brother!

02-10-2011, 11:12 AM	#9
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,408	Re: Parting 71 3/4 ton 2wd Thanks Ray, I will let you know, if all that stuff was good I would have come up to get it. __________________ RIP El Jay! Love you brother!

02-10-2011, 11:19 AM	#10
Junkpyl Registered User Join Date: Jan 2007 Location: Scottsdale Arizona Posts: 125	Re: Parting 71 3/4 ton 2wd how is the grill other than that spot by the hood latch? how much for shipping to 71953?

02-10-2011, 02:24 PM	#11
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Parting 71 3/4 ton 2wd Is the gauge cluster still available? If so how much plus shipping to zip 32136? Thanks Projectjimmie

02-10-2011, 08:25 PM	#12
villa 66 Registered User Join Date: May 2009 Location: MERCEDES,TEXAS Posts: 146	Re: Parting 71 3/4 ton 2wd How much for both spindels,rotors,calipers shipped to 78570? Thanks

02-10-2011, 08:31 PM	#13
villa 66 Registered User Join Date: May 2009 Location: MERCEDES,TEXAS Posts: 146	Re: Parting 71 3/4 ton 2wd What would the shipping be for the booster,valve and bracs. too 78570. Thanks

02-11-2011, 12:13 AM	#14
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 71 3/4 ton 2wd Junkpyl- The grille is no good...many cracks and broken tabs Projectjimmie68- $34 shipped on a good cluster Villa 66- Too spendy to ship spindles, rotors. You might try TEXAS SQUARE BODIES in the 73-87 parts section. Booster, brackets, and prop valve $70 shipped Thanks, Ray

02-11-2011, 09:51 AM	#15
bignbad Registered User Join Date: Jan 2009 Location: highspire,pa Posts: 423	Re: Parting 71 3/4 ton 2wd still interested in the seatbelt,did you happen to check to see if it retracts? __________________ '72 chevy k20 '06 H-D Springer softail http://www.bluemooncruisers.com/ http://www.enginecycle.com/ ~Eric

02-11-2011, 12:31 PM	#16
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Parting 71 3/4 ton 2wd Would 25 shipped buy the gauge cluster?



Register or Log In To remove these advertisements.

02-11-2011, 02:26 PM	#17
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,262	Re: Parting 71 3/4 ton 2wd Are you selling the bed and if you are how much and can I get some pics thanks Posted via Mobile Device

02-11-2011, 07:45 PM	#18
fasttech Registered User Join Date: Mar 2008 Location: Houston Texas Posts: 77	Re: Parting 71 3/4 ton 2wd Do you have a glove box door? If so how much are you asking?

02-12-2011, 02:25 PM	#21
tabarcus 72ChevyStep Join Date: Jun 2009 Location: Fredericksburg, VA Posts: 545	Re: Parting 71 3/4 ton 2wd How much for the Heater Control Unit?

02-12-2011, 08:40 PM	#23
bignbad Registered User Join Date: Jan 2009 Location: highspire,pa Posts: 423	Re: Parting 71 3/4 ton 2wd I'll take the seat belt,Pm payment info __________________ '72 chevy k20 '06 H-D Springer softail http://www.bluemooncruisers.com/ http://www.enginecycle.com/ ~Eric

02-12-2011, 11:01 PM	#25
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	Re: Parting 71 3/4 ton 2wd how much for the VW in 3rd pic? Cab have a title/if it for sale/how much? more pics please.

Register or Log In To remove these advertisements.