MN Now Parting 1967 Chevy CST!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 06-27-2011, 08:15 PM

Please ask about parts i did not price, there is other good stuff but I would have to look at it closer before i price. I have 100% ebay feedback but have a fulltime job so don't expect same day shipping.

-All prices do not include shipping unless otherwise stated. Shipped prices are for continental US only.
-Figure flat rate priority or actual parcel post from 55020 for shipping but I will give you an actual amount.
-If you ask about an item, you are in line and I assume you are intending to buy.
-If I don't hear from you within 24 hours, I will move on to the next person.
I am keeping the front fenders. Cab has no rust above floor level but floor, rockrs, supports are bad. Pass door has filler. Rear axle is a coorporate.

Horn cap (show quality!) 70 shipped ***New price 65 shipped
CST lighter 45 shipped (have two styles)
CST knobs 65 shipped ***New price 59 shipped for choke, radio and wiper knobs
Gauge cluster 50 shipped
Auto cross member (only if tranny sells) 40
T 400 linkage 55 shipped
T 400- no ship 100
hood latch and support 30 shipped
Sway bar with brackets 50 ***new price 55 SHIPPED
Grille (has one crack where bumper rubbed) no dents 75
Headlight bezels 35 shipped- ***have some dents so $20 Shipped
Door panels- some discoloration
Seatbelts- SOLD
Choke stem and wire- SOLD
Radio mount cups- SOLD
License plates- SOLD
Frame horns and sm frt brackets- SOLD
Ign and door locks- SOLD
T400kickdown and brkt- SOLD
Ext door handles- SOLD pending payment
Vent windows- SOLD pending payment
Shift indicator- SOLD pending payment

paul mora has 1st shot on the side trim if I decide to sell any of that

Jud

**too much stuff** · 06-27-2011, 08:18 PM

ignition with bezel and glovebox door?

Vintage Windmills · 06-27-2011, 08:22 PM

more pics

**STP67-72** · 06-27-2011, 08:24 PM

Interested in driver side vent window assembly, if it is for sale. Also the seat belts?

*sharpie1972* · 06-27-2011, 08:30 PM

Any chance the TH400 kickdown switch and wiring made its way to the Target motor? Thanks, Sharpie

chewychevy67 · 06-27-2011, 08:51 PM

does the lighter have the original knob?

**Chevy4Life** · 06-27-2011, 09:11 PM

How much for the window cranks shipped to 89014?
Thanks

Leroy-B1 · 06-27-2011, 09:37 PM

What about the vent windows on the doors?
Posted via Mobile Device

teeitup · 06-27-2011, 09:56 PM

Jud, in line for vent windows, door and window cranks. Thanks Randy

67chevy1series · 06-27-2011, 10:02 PM

i would be interested in the am radio cups, incase you dont know they are the little cups that hold the radio in the dash...

2002yanks · 06-27-2011, 10:04 PM

interested in the gage cluster. can you get a better picture of it? any damage? also interested in the glove box door? pic and price of that also.

VA72C10 · 06-27-2011, 10:32 PM

inner and outer door handles/window cranks
gauges w/ bezel
just the bezel
glovebox door
rad support?

bmfm64 · 06-27-2011, 10:34 PM

License plate? shipped to 98042

**DREW67** · 06-27-2011, 10:50 PM

I need Chrome vent wings if they get to me.

rich67 · 06-27-2011, 11:00 PM

anything wrong with driverside fender ? be interested in it maybe. also what does that mean, corperate rear? eaton? lmk rich

Vintage Windmills · 06-27-2011, 11:33 PM

Quote:

Originally Posted by too much stuff

ignition with bezel and glovebox door?

Eric, I am going to keep the glovebox door to do a shelf/display thing in my shop. Here is a pic of ignition with bezel. How's $15 sound?

Quote:

Originally Posted by STP67-72

Interested in driver side vent window assembly, if it is for sale. Also the seat belts?

Vents have some pitting and aren't the best so I don't think anyone would be happy with them. Pics of the seat belts below. The pass retractor needs work and its cover is cracked. Driver is pretty nice but buckles and belts need a cleaning. $35 shipped.

Quote:

Originally Posted by sharpie1972

Any chance the TH400 kickdown switch and wiring made its way to the Target motor? Thanks, Sharpie

Yes, but it looks different and wiring has been spliced and doesn't look good. See pic and let me know what you think.

rich67 · 06-27-2011, 11:38 PM

Quote:

Originally Posted by rich67

anything wrong with driverside fender ? be interested in it maybe. also what does that mean, corperate rear? eaton? lmk rich

so sorry. i read on.

Vintage Windmills · 06-27-2011, 11:46 PM

Quote:

Originally Posted by chewychevy67

does the lighter have the original knob?

I think so but it looks different than other 67's I've seen that are shorter/flatter. This may be harder to find? See pic below

Quote:

Originally Posted by Chevy4Life

How much for the window cranks shipped to 89014?
Thanks

They're pretty crappy, don't think anyone would be happy with them.

Quote:

Originally Posted by Leroy-B1

What about the vent windows on the doors?
Posted via Mobile Device

Randy and Leroy, Sorry, they have some pitting.

Quote:

Originally Posted by 67chevy1series

i would be interested in the am radio cups, incase you dont know they are the little cups that hold the radio in the dash...

How's $10 shipped, Rick?

Quote:

Originally Posted by 2002yanks

interested in the gage cluster. can you get a better picture of it? any damage? also interested in the glove box door? pic and price of that also.

Don't know if guages work or not but they don't look too bad. I'll get more pics tomorrow. Glovebox door not for sale.

**botmfedr1** · 06-27-2011, 11:48 PM

Please put me in line for that electronic kick down thingy. Shipping to 79908 please.
Posted via Mobile Device

Vintage Windmills · 06-27-2011, 11:59 PM

Quote:

Originally Posted by VA72C10

inner and outer door handles/window cranks
gauges w/ bezel
just the bezel
glovebox door
rad support?

jonathan, see my responses above on guages, glovebox door.

The core support is junk.

Quote:

Originally Posted by bmfm64

License plate? shipped to 98042

SD plates, not original. $10 shipped.

Quote:

Originally Posted by DREW67

I need Chrome vent wings if they get to me.

some pitting, so not something worth selling

Quote:

Originally Posted by rich67

anything wrong with driverside fender ? be interested in it maybe. also what does that mean, corperate rear? eaton? lmk rich

Eaton rear 4.11 ratio.

Pics of hubcaps for tampz67yahoo. rear two are junk (in photo in grass) and front two have some dents. $29 shipped for the front two.

Vintage Windmills · 06-28-2011, 12:02 AM

Actually only one of those hubcaps looks repairable, $19 shipped

rcjaxx · 06-28-2011, 12:41 AM

hood latch and support shipped to 76227

Vintage Windmills · 06-28-2011, 01:00 AM

Quote:

Originally Posted by rcjaxx

hood latch and support shipped to 76227

30 dollars total- let me know.

VA72C10 · 06-28-2011, 01:06 AM

how about the inner door and window handles and the outer door handles?

Vintage Windmills · 06-28-2011, 01:31 AM

Quote:

Originally Posted by VA72C10

how about the inner door and window handles and the outer door handles?

chrome is bad on all

06-27-2011, 08:15 PM	#1
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Now Parting 1967 Chevy CST!!!! Please ask about parts i did not price, there is other good stuff but I would have to look at it closer before i price. I have 100% ebay feedback but have a fulltime job so don't expect same day shipping. -All prices do not include shipping unless otherwise stated. Shipped prices are for continental US only. -Figure flat rate priority or actual parcel post from 55020 for shipping but I will give you an actual amount. -If you ask about an item, you are in line and I assume you are intending to buy. -If I don't hear from you within 24 hours, I will move on to the next person. I am keeping the front fenders. Cab has no rust above floor level but floor, rockrs, supports are bad. Pass door has filler. Rear axle is a coorporate. Horn cap (show quality!) 70 shipped *New price 65 shipped CST lighter 45 shipped (have two styles) CST knobs 65 shipped New price 59 shipped for choke, radio and wiper knobs Gauge cluster 50 shipped Auto cross member (only if tranny sells) 40 T 400 linkage 55 shipped T 400- no ship 100 hood latch and support 30 shipped Sway bar with brackets 50 new price 55 SHIPPED Grille (has one crack where bumper rubbed) no dents 75 Headlight bezels 35 shipped- have some dents so $20 Shipped Door panels- some discoloration Seatbelts- SOLD Choke stem and wire- SOLD Radio mount cups- SOLD License plates- SOLD Frame horns and sm frt brackets- SOLD Ign and door locks- SOLD T400kickdown and brkt- SOLD Ext door handles- SOLD pending payment Vent windows- SOLD pending payment Shift indicator- SOLD pending payment paul mora has 1st shot on the side trim if I decide to sell any of that Jud Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread:* http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6 Last edited by Vintage Windmills; 07-06-2011 at 01:39 PM. Reason: new lower prices and sold items

06-27-2011, 08:18 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,715	Re: Now Parting 1967 Chevy CST!!!! ignition with bezel and glovebox door? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-27-2011, 08:22 PM	#3
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now Parting 1967 Chevy CST!!!! more pics Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

06-27-2011, 08:24 PM	#4
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,664	Re: Now Parting 1967 Chevy CST!!!! Interested in driver side vent window assembly, if it is for sale. Also the seat belts? __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

06-27-2011, 08:30 PM	#5
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Now Parting 1967 Chevy CST!!!! Any chance the TH400 kickdown switch and wiring made its way to the Target motor? Thanks, Sharpie

06-27-2011, 08:51 PM	#6
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,426	Re: Now Parting 1967 Chevy CST!!!! does the lighter have the original knob?

06-27-2011, 09:11 PM	#7
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	Re: Now Parting 1967 Chevy CST!!!! How much for the window cranks shipped to 89014? Thanks

06-27-2011, 09:37 PM	#8
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Now Parting 1967 Chevy CST!!!! What about the vent windows on the doors? Posted via Mobile Device

06-27-2011, 09:56 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Now Parting 1967 Chevy CST!!!! Jud, in line for vent windows, door and window cranks. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-27-2011, 10:02 PM	#10
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Now Parting 1967 Chevy CST!!!! i would be interested in the am radio cups, incase you dont know they are the little cups that hold the radio in the dash...

06-27-2011, 10:04 PM	#11
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Now Parting 1967 Chevy CST!!!! interested in the gage cluster. can you get a better picture of it? any damage? also interested in the glove box door? pic and price of that also. Last edited by 2002yanks; 06-27-2011 at 10:07 PM.

06-27-2011, 10:32 PM	#12
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Now Parting 1967 Chevy CST!!!! inner and outer door handles/window cranks gauges w/ bezel just the bezel glovebox door rad support? __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 06-27-2011 at 10:32 PM.

06-27-2011, 10:34 PM	#13
bmfm64 Registered User Join Date: May 2011 Location: Covington, Wa Posts: 5,240	Re: Now Parting 1967 Chevy CST!!!! License plate? shipped to 98042

06-27-2011, 10:50 PM	#14
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,029	Re: Now Parting 1967 Chevy CST!!!! I need Chrome vent wings if they get to me. __________________ DREW67

06-27-2011, 11:00 PM	#15
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: Now Parting 1967 Chevy CST!!!! anything wrong with driverside fender ? be interested in it maybe. also what does that mean, corperate rear? eaton? lmk rich Last edited by rich67; 06-27-2011 at 11:37 PM.



Register or Log In To remove these advertisements.

06-27-2011, 11:48 PM	#19
botmfedr1 Senior Member Join Date: Feb 2008 Location: Harlingen, TX Posts: 1,098	Re: Now Parting 1967 Chevy CST!!!! Please put me in line for that electronic kick down thingy. Shipping to 79908 please. Posted via Mobile Device

06-28-2011, 12:02 AM	#21
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now Parting 1967 Chevy CST!!!! Actually only one of those hubcaps looks repairable, $19 shipped __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

06-28-2011, 12:41 AM	#22
rcjaxx Registered User Join Date: Jun 2011 Location: denton tx Posts: 6	Re: Now Parting 1967 Chevy CST!!!! hood latch and support shipped to 76227

06-28-2011, 01:06 AM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Now Parting 1967 Chevy CST!!!! how about the inner door and window handles and the outer door handles? __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.