IN 71 AC cab getting the knife for patches - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 11-29-2011, 08:03 AM

I am tired of looking at this thing and have decided by the time I get to patching the rockers and such I could have found another of equal or better condition... Has solid rear, cab corners, cab supports besides front driver, ac firewall, pillars, rear cab, roof, drip rail, and amny floor pieces to be salvaged along with high hump... Get at me for what pieces if any... thanks

BBC High Hump-$75

HeavyMetalChevy · 11-29-2011, 08:08 AM

more

HeavyMetalChevy · 11-29-2011, 08:14 AM

more

HeavyMetalChevy · 11-30-2011, 03:36 AM

more pics

HeavyMetalChevy · 11-30-2011, 03:40 AM

more the rust is not as bad as it looks... just very dark stain... I will blast all the suspicious areas to confirm...

HeavyMetalChevy · 11-30-2011, 03:43 AM

drip rails and pass floor

jessewebb · 11-30-2011, 08:24 AM

Check on the A\C firewall and the passengers side floor post 1st picture in 2nd post. put me in line.

**fine69** · 11-30-2011, 10:23 AM

Thats a pretty nice cab for around here.

**DaHos** · 11-30-2011, 11:33 AM

Quote:

Originally Posted by fine69

Thats a pretty nice cab for around here.

I thought the same....?????

jessewebb · 11-30-2011, 10:54 PM

You must be catching up on some zzzzzzz's

This is what I'm after, I'm assuming that's the spot I need for the A\C ??

poncyj · 11-30-2011, 11:06 PM

If available, I would like both of the lower door pillars (the marked around area the last pic).

HeavyMetalChevy · 11-30-2011, 11:18 PM

Quote:

Originally Posted by fine69

Thats a pretty nice cab for around here.

Quote:

Originally Posted by DaHos

I thought the same....?????

I know it is NICE!!! I had the whole thing listed but nobody even offered at 350??? wth... Always up for offers on whole thing guys... I was saving it for a project but I fig. one at a time is enough!!! and it would just sit in storage unit... make offer I can store it out of weather until someone can get to it...

HeavyMetalChevy · 11-30-2011, 11:21 PM

Quote:

Originally Posted by jessewebb

You must be catching up on some zzzzzzz's

This is what I'm after, I'm assuming that's the spot I need for the A\C ??

Quote:

Originally Posted by poncyj

If available, I would like both of the lower door pillars (the marked around area the last pic).

Jesse... You can just mod ur firewall to make that hole and hook up ac...
I have the door pillar... I will start cutting on other cabs tomorrow

poncyj.. .same as well I have two cabs with bad floors and I will get the pillars from them... I would say 80 for both sound good??? I will send pics of course...Heck I will blast them too!!!

poncyj · 12-01-2011, 12:04 AM

Sounds good. Here is my email address for the pics. edmondjjr@yahoo.com

**70STOVEBOLT** · 12-01-2011, 06:41 PM

Duane, how much for the trim at the back of the cab? It looks like it was there in the first pic, but gone in the rest.

Thanks,
Mark

HeavyMetalChevy · 12-01-2011, 07:14 PM

Quote:

Originally Posted by 70STOVEBOLT

Duane, how much for the trim at the back of the cab? It looks like it was there in the first pic, but gone in the rest.

Thanks,
Mark

the thin intermediate strip which wraps the cab??? I will get pics.. yes it was removed...I think it had one slight ding/flaw in it.. .I will post pics for you and go from there... BRB!

**jimer1964** · 12-01-2011, 07:47 PM

when you start choppin! interested in inside rear floor section below gas tank from cab corner to cab corner! thanks wild man!

HeavyMetalChevy · 12-01-2011, 08:05 PM

Quote:

Originally Posted by jimer1964

when you start choppin! interested in inside rear floor section below gas tank from cab corner to cab corner! thanks wild man!

Hey!!! Who told you I was wild...lol someone giving away my secrets... I have had the nickname "DWANIAC" since I was oh...15.. I just ran with it

jessewebb · 12-01-2011, 10:53 PM

Duane if that other dude doesn't come through with the top of the roof part on the passenger side. if no one has requested that part put me in line for it. Please. I'd take it from the crease at the top to the cab corner.

jessewebb · 12-01-2011, 11:04 PM

if nobody buys that section or the firewall. I still want it. Don't toss it

**70STOVEBOLT** · 12-06-2011, 07:47 PM

Duane, I forgot to ask you about that cab trim when I was down there Saturday. Did you ever get some pics of it?

Thanks,
Mark

HeavyMetalChevy · 12-13-2011, 11:42 PM

Quote:

Originally Posted by 70STOVEBOLT

Duane, I forgot to ask you about that cab trim when I was down there Saturday. Did you ever get some pics of it?

Thanks,
Mark

Yeah buddy... sorry took so long for response.. let me track them down... been doing quite a bit of travel tracking down parts and such... I will have them up shortly..

**70STOVEBOLT** · 12-14-2011, 09:12 AM

No hurry.

Leroy-B1 · 01-04-2012, 01:23 PM

Still have this for patches?
Posted via Mobile Device

timberjim36 · 01-04-2012, 01:27 PM

hey Heavy do you happen to have any sending units or door bottoms ?

11-29-2011, 08:03 AM	#1
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	71 AC cab getting the knife for patches I am tired of looking at this thing and have decided by the time I get to patching the rockers and such I could have found another of equal or better condition... Has solid rear, cab corners, cab supports besides front driver, ac firewall, pillars, rear cab, roof, drip rail, and amny floor pieces to be salvaged along with high hump... Get at me for what pieces if any... thanks BBC High Hump-$75 Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 12-02-2011 at 01:06 AM.

11-29-2011, 08:08 AM	#2
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 71 AC cab getting the knife for patches more Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-29-2011, 08:14 AM	#3
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 71 AC cab getting the knife for patches more Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-30-2011, 03:36 AM	#4
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 71 AC cab getting the knife for patches more pics Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-30-2011, 03:40 AM	#5
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 71 AC cab getting the knife for patches more the rust is not as bad as it looks... just very dark stain... I will blast all the suspicious areas to confirm... Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-30-2011, 03:43 AM	#6
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 71 AC cab getting the knife for patches drip rails and pass floor Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-30-2011, 08:24 AM	#7
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 71 AC cab getting the knife for patches Check on the A\C firewall and the passengers side floor post 1st picture in 2nd post. put me in line. __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

11-30-2011, 10:23 AM	#8
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: 71 AC cab getting the knife for patches Thats a pretty nice cab for around here. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

11-30-2011, 10:54 PM	#10
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 71 AC cab getting the knife for patches You must be catching up on some zzzzzzz's This is what I'm after, I'm assuming that's the spot I need for the A\C ?? Attached Images __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

11-30-2011, 11:06 PM	#11
poncyj Registered User Join Date: Apr 2010 Location: summerville, sc Posts: 59	Re: 71 AC cab getting the knife for patches If available, I would like both of the lower door pillars (the marked around area the last pic).

12-01-2011, 12:04 AM	#14
poncyj Registered User Join Date: Apr 2010 Location: summerville, sc Posts: 59	Re: 71 AC cab getting the knife for patches Sounds good. Here is my email address for the pics. edmondjjr@yahoo.com

12-01-2011, 06:41 PM	#15
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,235	Re: 71 AC cab getting the knife for patches Duane, how much for the trim at the back of the cab? It looks like it was there in the first pic, but gone in the rest. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-01-2011, 07:47 PM	#17
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,679	Re: 71 AC cab getting the knife for patches when you start choppin! interested in inside rear floor section below gas tank from cab corner to cab corner! thanks wild man!

12-01-2011, 10:53 PM	#19
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 71 AC cab getting the knife for patches Duane if that other dude doesn't come through with the top of the roof part on the passenger side. if no one has requested that part put me in line for it. Please. I'd take it from the crease at the top to the cab corner. Attached Images __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

12-01-2011, 11:04 PM	#20
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 71 AC cab getting the knife for patches if nobody buys that section or the firewall. I still want it. Don't toss it Attached Images __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride



Register or Log In To remove these advertisements.

12-06-2011, 07:47 PM	#21
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,235	Re: 71 AC cab getting the knife for patches Duane, I forgot to ask you about that cab trim when I was down there Saturday. Did you ever get some pics of it? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-14-2011, 09:12 AM	#23
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,235	Re: 71 AC cab getting the knife for patches No hurry. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-04-2012, 01:23 PM	#24
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: 71 AC cab getting the knife for patches Still have this for patches? Posted via Mobile Device

01-04-2012, 01:27 PM	#25
timberjim36 Registered User Join Date: Jun 2011 Location: cape cod ma Posts: 160	Re: 71 AC cab getting the knife for patches hey Heavy do you happen to have any sending units or door bottoms ? __________________ 1980 crewcab dually soon to have a gen VI 454 rectangular port heads holley strip dominator crusader marine stand alone tbi setup with a TCI tcu controlled 4L80 (daily driver) 92 harley electra glide ultra classic

Register or Log In To remove these advertisements.