CA 250 engine and 3-speed manual trans - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sacto67 · 06-02-2012, 10:52 AM

NOW PARTING OUT

Currently in my 1968 Chevy C10 this 250 inline six cylinder engine has a 3-speed manual transmission attached to it. Both are for sale together or separate. This truck sat for 11 years until I bought it about 6 months ago. I was told it ran great when it was parked due to suspension issues. It has new plugs, new wires, new HEI distributor (w/new coil), a rebuild carb, new fuel pump, new starter, and new fuel lines. It runs at idle but backfires out of the carb and quits with thottle. I'm thinking it's either a bad cam, vacuum leak, or a stuck valve.

As far as the transmission's condition, I was able to put it in 1st gear and idle it up and down the street about 300 feet. Otherwise it's condition is unknown because I've never had it runnuing good enough to drive through the gears. make me an offer.

****This is a copy/repeat ad.....I found out the engine wasn't a 292 as I was told and I can't edit the original thread title****

sacto67 · 08-03-2012, 01:20 PM

Still available

duallyjams · 08-04-2012, 08:20 AM

FYI per forum rules you must post a price.

sacto67 · 08-04-2012, 12:10 PM

Quote:

Originally Posted by duallyjams

FYI per forum rules you must post a price.

Sorry about that, I haven't got a clue what its worth. $250 o.b.o.???

sacto67 · 08-17-2012, 09:06 PM

$200??

68 IRON · 08-18-2012, 12:03 PM

Are you willing to seperate? I'm interested in the distributor.

sacto67 · 08-18-2012, 12:17 PM

Quote:

Originally Posted by 68 IRON

Are you willing to seperate? I'm interested in the distributor.

I was hoping not to, I already have a local guy interested in the dist.

68 IRON · 08-18-2012, 12:21 PM

Ok, if something changes let me know.
-John

**70STOVEBOLT** · 08-18-2012, 12:35 PM

I am in need of an exhaust manifold. Are you willing to sell it? If so, give me a price shipped to 46562 please.

Thanks,
Mark

sacto67 · 09-22-2012, 07:06 PM

Last price drop before parting it out. $150 o.b.o.

duallyjams · 09-22-2012, 08:19 PM

If you decide to part I would be interested in the carb & air cleaner.

sacto67 · 09-24-2012, 05:15 PM

Quote:

Originally Posted by dano69c10

how much for just the engine? I don't need the tranny.

$100?

sacto67 · 09-25-2012, 10:48 PM

Quote:

Originally Posted by Dano69c10

How far are you from San Jose (timewise)?
I'll get in line for both the engine and tranny.

2 hours and 18 minutes according to the navigation on my phone. Since I was trying to sell the engine and trans together first, you're the first in line.

sacto67 · 09-26-2012, 05:34 PM

I pulled the engine out today. It's ready to go.

sacto67 · 09-27-2012, 05:44 PM

Quote:

Originally Posted by Dano69c10

I'll be up in the San Jose the weekend of 10/12 - 10/14 Can you wait that long?.

I can wait that long but I will be out of town. However, I asked my neighbor if he would help you get it in your truck and collect the $$ and he said no problem. So just give me a closer timeframe when you get a chance.

sacto67 · 10-03-2012, 06:37 PM

Okay time to part it out. So far the interests are:

68 Iron-----distributor (did you want the new plugs and wires also??)----send me your zip

70Stovebolt-----exhaust manifold-----I’ll get you a shipping price.

Duallyjams-----carburetor and air cleaner-----send me your zip

I can’t say it’ll be fast but I’ll do my best get you the shipping cost then we can talk overall prices.

Anyone else interested in parts let me know the parts and your zip.

Maddoxdb · 10-03-2012, 06:46 PM

I'd like to get in line for distributor. Thanks, Dustin
Posted via Mobile Device

**ScottH** · 10-08-2012, 06:49 PM

I'd like the distributor and possibly fuel pump
can send payment right away.

thanks
Scott

duallyjams · 10-08-2012, 08:13 PM

I've been slacking
zip 20751

Maddoxdb · 10-08-2012, 09:08 PM

If 68iron passes I need the distributor and wires. Shipping to 73644. Thanks, Dustin
Posted via Mobile Device

68 IRON · 10-09-2012, 01:26 PM

Still interested...gimme a total to 98501. Thanks

sacto67 · 10-09-2012, 02:18 PM

Quote:

Originally Posted by 68 IRON

Still interested...gimme a total to 98501. Thanks

Did you want the plugs and wires also?

68 IRON · 10-09-2012, 02:28 PM

I wont need the plugs and wires....just the HEI would be fine.

sacto67 · 10-09-2012, 03:57 PM

Quote:

Originally Posted by 68 IRON

I wont need the plugs and wires....just the HEI would be fine.

Okay, I'll pull off the wires, get a box for it, and get a quote for you. I'm headed out of town friday. I'll try and get the quote for you today if you want it sooner than later.

68 IRON · 10-09-2012, 04:38 PM

Sounds good I'll check back later, no worries

06-02-2012, 10:52 AM	#1
sacto67 Registered User Join Date: Sep 2011 Location: Sacramento Posts: 196	250 engine and 3-speed manual trans NOW PARTING OUT Currently in my 1968 Chevy C10 this 250 inline six cylinder engine has a 3-speed manual transmission attached to it. Both are for sale together or separate. This truck sat for 11 years until I bought it about 6 months ago. I was told it ran great when it was parked due to suspension issues. It has new plugs, new wires, new HEI distributor (w/new coil), a rebuild carb, new fuel pump, new starter, and new fuel lines. It runs at idle but backfires out of the carb and quits with thottle. I'm thinking it's either a bad cam, vacuum leak, or a stuck valve. As far as the transmission's condition, I was able to put it in 1st gear and idle it up and down the street about 300 feet. Otherwise it's condition is unknown because I've never had it runnuing good enough to drive through the gears. make me an offer. **This is a copy/repeat ad.....I found out the engine wasn't a 292 as I was told and I can't edit the original thread title** __________________ 1968 Chevy SWB stepside original USAF truck http://67-72chevytrucks.com/vboard/s...d.php?t=483462 Last edited by sacto67; 10-03-2012 at 06:38 PM.

08-03-2012, 01:20 PM	#2
sacto67 Registered User Join Date: Sep 2011 Location: Sacramento Posts: 196	Re: 250 engine and 3-speed manual trans Still available __________________ 1968 Chevy SWB stepside original USAF truck http://67-72chevytrucks.com/vboard/s...d.php?t=483462

08-04-2012, 08:20 AM	#3
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 250 engine and 3-speed manual trans FYI per forum rules you must post a price. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

08-17-2012, 09:06 PM	#5
sacto67 Registered User Join Date: Sep 2011 Location: Sacramento Posts: 196	Re: 250 engine and 3-speed manual trans $200?? __________________ 1968 Chevy SWB stepside original USAF truck http://67-72chevytrucks.com/vboard/s...d.php?t=483462

08-18-2012, 12:03 PM	#6
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 250 engine and 3-speed manual trans Are you willing to seperate? I'm interested in the distributor.

08-18-2012, 12:21 PM	#8
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 250 engine and 3-speed manual trans Ok, if something changes let me know. -John

08-18-2012, 12:35 PM	#9
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,233	Re: 250 engine and 3-speed manual trans I am in need of an exhaust manifold. Are you willing to sell it? If so, give me a price shipped to 46562 please. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-22-2012, 07:06 PM	#10
sacto67 Registered User Join Date: Sep 2011 Location: Sacramento Posts: 196	Re: 250 engine and 3-speed manual trans Last price drop before parting it out. $150 o.b.o. __________________ 1968 Chevy SWB stepside original USAF truck http://67-72chevytrucks.com/vboard/s...d.php?t=483462

09-22-2012, 08:19 PM	#11
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 250 engine and 3-speed manual trans If you decide to part I would be interested in the carb & air cleaner. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

09-26-2012, 05:34 PM	#14
sacto67 Registered User Join Date: Sep 2011 Location: Sacramento Posts: 196	Re: 250 engine and 3-speed manual trans I pulled the engine out today. It's ready to go. Attached Images __________________ 1968 Chevy SWB stepside original USAF truck http://67-72chevytrucks.com/vboard/s...d.php?t=483462

10-03-2012, 06:37 PM	#16
sacto67 Registered User Join Date: Sep 2011 Location: Sacramento Posts: 196	Re: 250 engine and 3-speed manual trans Okay time to part it out. So far the interests are: 68 Iron-----distributor (did you want the new plugs and wires also??)----send me your zip 70Stovebolt-----exhaust manifold-----I’ll get you a shipping price. Duallyjams-----carburetor and air cleaner-----send me your zip I can’t say it’ll be fast but I’ll do my best get you the shipping cost then we can talk overall prices. Anyone else interested in parts let me know the parts and your zip. __________________ 1968 Chevy SWB stepside original USAF truck http://67-72chevytrucks.com/vboard/s...d.php?t=483462

10-03-2012, 06:46 PM	#17
Maddoxdb Registered User Join Date: Jun 2011 Location: Elk city ok Posts: 891	Re: 250 engine and 3-speed manual trans I'd like to get in line for distributor. Thanks, Dustin Posted via Mobile Device

10-08-2012, 06:49 PM	#18
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 250 engine and 3-speed manual trans I'd like the distributor and possibly fuel pump can send payment right away. thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-08-2012, 08:13 PM	#19
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 250 engine and 3-speed manual trans I've been slacking zip 20751 __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

10-08-2012, 09:08 PM	#20
Maddoxdb Registered User Join Date: Jun 2011 Location: Elk city ok Posts: 891	Re: 250 engine and 3-speed manual trans If 68iron passes I need the distributor and wires. Shipping to 73644. Thanks, Dustin Posted via Mobile Device



Register or Log In To remove these advertisements.

10-09-2012, 01:26 PM	#21
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 250 engine and 3-speed manual trans Still interested...gimme a total to 98501. Thanks

10-09-2012, 02:28 PM	#23
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 250 engine and 3-speed manual trans I wont need the plugs and wires....just the HEI would be fine.

10-09-2012, 04:38 PM	#25
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 250 engine and 3-speed manual trans Sounds good I'll check back later, no worries

Register or Log In To remove these advertisements.