TX 72 Cheyenne super LWB for parts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hfd410 · 03-15-2013, 10:58 PM

I picked up this lwb super with original eng/trans (350/350) from the original owner. It is one of the lesser optioned super's that Ive seen. No tilt or tach and no factory a/c. It was added way back when. I understand that "super" is just trim but typically they have some of these options. It has a nice olive headliner and visors, olive non tilt column, nice olive seatbelts, and wood grain bezel and glove box door. Headliner trim, driver quality. Green door panels are driver quality. Front and rear window trim is really nice. Very small imperfections (one on front, one on back) that will come out easy. I know nothing about the drivetrain other than it was tagged in 1999, was driven to where I found it, and has sat ever since. Clear Texas title. Its all there. No tailgate, has a bale spear and winch. Leaf spring rear end. Cab is decent with passenger side rocker worse than driver. Im not sure if I should part it or sell it whole. Any advice appreciated and I'll start pricing some stuff. If interested in anything just ask...

**too much stuff** · 03-15-2013, 11:01 PM

Glove box door price? Door panels condition and price?

timmoser · 03-15-2013, 11:03 PM

interested in the colume, and the brake pedal assy. how much for those.

**DeadheadNM** · 03-15-2013, 11:06 PM

Price/condition for defrost vents and wood grain cluster bezel (don't need gauges) thanks...

hfd410 · 03-15-2013, 11:09 PM

few more

UP GRADE · 03-15-2013, 11:12 PM

How much for the cargo light, ignition switch and door locks if the key match both. Second in line for the door panels. Can u post a pictures of the door panels?
Posted via Mobile Device

hfd410 · 03-15-2013, 11:14 PM

I'll get you guys some prices tomorrow and price some stuff that isnt already. Of course everything is plus shipping...Bear with me for a day or two

**DeadheadNM** · 03-15-2013, 11:15 PM

Quote:

Originally Posted by DeadheadNM

Price/condition for defrost vents and wood grain cluster bezel (don't need gauges) thanks...

Also interested in the heater control and door pillar striker plates....

mo · 03-15-2013, 11:19 PM

Interested in the steering wheel.
Posted via Mobile Device

mightymouse · 03-15-2013, 11:22 PM

how much for the complete cab with title .

mo · 03-15-2013, 11:36 PM

Also the carb... Price and shipped to 93013. Thank you
Posted via Mobile Device

**TBONE1964** · 03-15-2013, 11:41 PM

I would be interested in the heat tube on drivers side manifold and peice that goes on manifold if it is still good. Both exhaust manifolds. Alternator and P/S brackets.

Both park light assemblies, radiator hold downs (if for a 4 row), Cheyenne emblems on fenders.

shipping to: 48371

PM me please,

Thank you

hfd410 · 03-15-2013, 11:52 PM

prices coming in a day or two guys, Im just getting this thing going..

**leddzepp** · 03-15-2013, 11:55 PM

You need to post prices within 24 hours or the thread will be locked. Thank you.
Posted via Mobile Device

hfd410 · 03-15-2013, 11:58 PM

thanks leddzepp, will do...

mosesburb · 03-16-2013, 12:58 AM

I will get in line for the woodgrain cluster.

Darren MagooGardner · 03-16-2013, 01:17 AM

I would like the valve covers.... pending price

Fattback · 03-16-2013, 01:32 AM

Pics and price on power steering pump and Brackets plz?

Thanks
Rob

Olive1970 · 03-16-2013, 03:25 AM

Pics of seatbelts out of truck and cig lighter?

nobolt · 03-16-2013, 05:01 AM

armrests and headliner trim to 48001 please.

also interested in drivers door w/ regulator, glass and vent window.
thanks

jjzepplin · 03-16-2013, 08:07 AM

Interested in rag joint pending size of spline. I need the larger one about 3/4".

**uncle** · 03-16-2013, 08:25 AM

In line for carb/choke setup
Posted via Mobile Device

**WETOWM** · 03-16-2013, 08:37 AM

how much for the a/c brackets and add on crank pulley for a/c belt

ChevyCruizer · 03-16-2013, 09:15 AM

interested in the upper body side molding 89121

tommys72 · 03-16-2013, 09:49 AM

What do you want for the complete air cleaner, and door panels
Posted via Mobile Device

03-15-2013, 10:58 PM	#1
hfd410 Registered User Join Date: Jul 2012 Location: Burleson Texas Posts: 570	72 Cheyenne super LWB for parts? I picked up this lwb super with original eng/trans (350/350) from the original owner. It is one of the lesser optioned super's that Ive seen. No tilt or tach and no factory a/c. It was added way back when. I understand that "super" is just trim but typically they have some of these options. It has a nice olive headliner and visors, olive non tilt column, nice olive seatbelts, and wood grain bezel and glove box door. Headliner trim, driver quality. Green door panels are driver quality. Front and rear window trim is really nice. Very small imperfections (one on front, one on back) that will come out easy. I know nothing about the drivetrain other than it was tagged in 1999, was driven to where I found it, and has sat ever since. Clear Texas title. Its all there. No tailgate, has a bale spear and winch. Leaf spring rear end. Cab is decent with passenger side rocker worse than driver. Im not sure if I should part it or sell it whole. Any advice appreciated and I'll start pricing some stuff. If interested in anything just ask... Attached Images

03-15-2013, 11:01 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,714	Re: 72 Cheyenne super LWB for parts? Glove box door price? Door panels condition and price? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-15-2013, 11:03 PM	#3
timmoser Registered User Join Date: Oct 2012 Location: Elora Ontario , Canada Posts: 140	Re: 72 Cheyenne super LWB for parts? interested in the colume, and the brake pedal assy. how much for those.

03-15-2013, 11:06 PM	#4
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,307	Re: 72 Cheyenne super LWB for parts? Price/condition for defrost vents and wood grain cluster bezel (don't need gauges) thanks... __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-15-2013, 11:09 PM	#5
hfd410 Registered User Join Date: Jul 2012 Location: Burleson Texas Posts: 570	Re: 72 Cheyenne super LWB for parts? few more Attached Images

03-15-2013, 11:12 PM	#6
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: 72 Cheyenne super LWB for parts? How much for the cargo light, ignition switch and door locks if the key match both. Second in line for the door panels. Can u post a pictures of the door panels? Posted via Mobile Device Last edited by UP GRADE; 03-15-2013 at 11:19 PM.

03-15-2013, 11:14 PM	#7
hfd410 Registered User Join Date: Jul 2012 Location: Burleson Texas Posts: 570	Re: 72 Cheyenne super LWB for parts? I'll get you guys some prices tomorrow and price some stuff that isnt already. Of course everything is plus shipping...Bear with me for a day or two

03-15-2013, 11:19 PM	#9
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: 72 Cheyenne super LWB for parts? Interested in the steering wheel. Posted via Mobile Device

03-15-2013, 11:22 PM	#10
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: 72 Cheyenne super LWB for parts? how much for the complete cab with title .

03-15-2013, 11:36 PM	#11
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: 72 Cheyenne super LWB for parts? Also the carb... Price and shipped to 93013. Thank you Posted via Mobile Device

03-15-2013, 11:41 PM	#12
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: 72 Cheyenne super LWB for parts? I would be interested in the heat tube on drivers side manifold and peice that goes on manifold if it is still good. Both exhaust manifolds. Alternator and P/S brackets. Both park light assemblies, radiator hold downs (if for a 4 row), Cheyenne emblems on fenders. shipping to: 48371 PM me please, Thank you Last edited by TBONE1964; 03-15-2013 at 11:47 PM.

03-15-2013, 11:52 PM	#13
hfd410 Registered User Join Date: Jul 2012 Location: Burleson Texas Posts: 570	Re: 72 Cheyenne super LWB for parts? prices coming in a day or two guys, Im just getting this thing going.. Attached Images

03-15-2013, 11:55 PM	#14
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,990	Re: 72 Cheyenne super LWB for parts? You need to post prices within 24 hours or the thread will be locked. Thank you. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

03-15-2013, 11:58 PM	#15
hfd410 Registered User Join Date: Jul 2012 Location: Burleson Texas Posts: 570	Re: 72 Cheyenne super LWB for parts? thanks leddzepp, will do...

03-16-2013, 12:58 AM	#16
mosesburb I had a V-8 Join Date: May 2003 Location: Phoenix AZ Posts: 1,116	Re: 72 Cheyenne super LWB for parts? I will get in line for the woodgrain cluster. __________________ 1972 K20 Suburban, 5.9L Cummins, Banks Power Pack, NV4500HD, NP205, H.A.D., D60/14FF ARB Link To Build: HERE.



Register or Log In To remove these advertisements.

03-16-2013, 01:17 AM	#17
Darren MagooGardner Registered User Join Date: May 2012 Location: minden la Posts: 704	Re: 72 Cheyenne super LWB for parts? I would like the valve covers.... pending price

03-16-2013, 01:32 AM	#18
Fattback Registered User Join Date: Sep 2010 Location: Oklahoma Posts: 287	Re: 72 Cheyenne super LWB for parts? Pics and price on power steering pump and Brackets plz? Thanks Rob

03-16-2013, 03:25 AM	#19
Olive1970 Registered User Join Date: Dec 2012 Location: Dorr MI Posts: 176	Re: 72 Cheyenne super LWB for parts? Pics of seatbelts out of truck and cig lighter? __________________ Gary Slowly looking for my next 67-72 truck

03-16-2013, 05:01 AM	#20
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: 72 Cheyenne super LWB for parts? armrests and headliner trim to 48001 please. also interested in drivers door w/ regulator, glass and vent window. thanks __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men) Last edited by nobolt; 03-16-2013 at 05:09 AM.

03-16-2013, 08:07 AM	#21
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,546	Re: 72 Cheyenne super LWB for parts? Interested in rag joint pending size of spline. I need the larger one about 3/4". __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

03-16-2013, 08:25 AM	#22
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: 72 Cheyenne super LWB for parts? In line for carb/choke setup Posted via Mobile Device

03-16-2013, 08:37 AM	#23
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,097	Re: 72 Cheyenne super LWB for parts? how much for the a/c brackets and add on crank pulley for a/c belt

03-16-2013, 09:15 AM	#24
ChevyCruizer 17's too small Join Date: Oct 2004 Location: Las Vegas, NV Posts: 335	Re: 72 Cheyenne super LWB for parts? interested in the upper body side molding 89121 __________________ 68 C10 SWB SS 5 lug power disc brake conversion 2.5 inch drop spindles van tilt column Air Ride Technologies Cool Ride air bag kits Performance Online tubular upper control arms and shock relocator kits ECE super track panhard bar 1 piece side windows

03-16-2013, 09:49 AM	#25
tommys72 Registered User Join Date: Jun 2012 Location: springfield mo Posts: 3,075	Re: 72 Cheyenne super LWB for parts? What do you want for the complete air cleaner, and door panels Posted via Mobile Device __________________ United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son

Register or Log In To remove these advertisements.