TX 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CheyenneSuper72 · 05-19-2013, 02:03 PM

Grill is in good condition other than the damage On the passenger side. See picture. Comes with parking lights, bezels and brackets. $150.

I saved the rear bed side sections off of a truck that I tore apart. They have no damage in the tail light area. These were cut off of a stock gm long bed. I can cut these up however you would like. They were cut in the middle of the wheel housing. I have both sides. These also have te holes for 69-72 moulding. Only have picture of one side. $100 each cut to your specs.

Pm me with any questions. Thanks!!!
Posted via Mobile Device

CheyenneSuper72 · 05-19-2013, 02:08 PM

Posted via Mobile Device

CheyenneSuper72 · 05-19-2013, 02:13 PM

Posted via Mobile Device

PD1292 · 05-20-2013, 08:41 AM

Ill take the grill if its not to far to drive. Where are you in Texas. Pm or just state a mileage from San Angelo. Thanks Barry

Route-66 · 05-20-2013, 08:53 AM

I will take the right side bedside panel cut right behind the start of the wheel well if you will give me an approximate shipping cost to 35976. I mainly have damage around the tail light section.

CheyenneSuper72 · 05-20-2013, 08:18 PM

Right side panel sold. Sale pending on grill....
Posted via Mobile Device

*mrdana60* · 05-21-2013, 04:44 AM

Do you have the driver side? Pics? I ll take it if we can work a deal. Shipping to 35960

CheyenneSuper72 · 05-21-2013, 08:33 AM

Pm sent
Posted via Mobile Device

PD1292 · 05-23-2013, 07:11 AM

I am out on the grill, too far of a drive for me. thanks anyway. TTT for you.

Evaded · 05-23-2013, 08:11 AM

May be interested in grill depending on your location...
Posted via Mobile Device

byk71913 · 05-31-2013, 11:17 AM

ill take the grille if you will ship?? im in Arkansas! thanks

74baggedbug · 05-31-2013, 11:39 AM

Where in Texas are you located at? I'm interested in grill thanks
Posted via Mobile Device

**68350** · 05-31-2013, 12:58 PM

Do you still have the drivers side bedside?
Posted via Mobile Device

CheyenneSuper72 · 05-31-2013, 06:00 PM

Pm sent on the grill. If evaded passes I may ship. Located close to Amarillo tx. Drivers bedside is still available. Thanks
Posted via Mobile Device

Undone · 05-31-2013, 06:42 PM

Shipping on LH Bedside patch to 30530.

CheyenneSuper72 · 05-31-2013, 07:10 PM

Depending on how much you need shipping will range from $25-45. Get me a measurement and I will let you know. Thanks.
Posted via Mobile Device

**68350** · 05-31-2013, 07:59 PM

I dont reallly need the taillight area if someone else needed it, I just want to fix this section shown above

CheyenneSuper72 · 06-02-2013, 12:15 PM

PM sent to 68350, Undone is next on the bedside.....grill is still for sale. Thanks!

**68350** · 06-02-2013, 02:21 PM

Payment sent
Posted via Mobile Device

CheyenneSuper72 · 06-02-2013, 02:41 PM

Bedsides are SOLD!! Grill is still available. Thanks.

mytruck70 · 06-03-2013, 11:35 PM

are those bed emblems for sell ?

CheyenneSuper72 · 06-03-2013, 11:40 PM

Those were pictures of another members truck to show me where to cut the replacement panel. Might pm him. Thanks
Posted via Mobile Device

Cohl · 06-05-2013, 02:52 AM

Is the grill still available? If so, would you ship it to Nevada? Thanks!
Posted via Mobile Device

CheyenneSuper72 · 06-05-2013, 06:40 AM

Pm sent
Posted via Mobile Device

Hard_Rain420 · 06-05-2013, 09:23 AM

Do you have the lower RH side molding? If so how much shipped to FL 32906?

05-19-2013, 02:03 PM	#1
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Grill is in good condition other than the damage On the passenger side. See picture. Comes with parking lights, bezels and brackets. $150. I saved the rear bed side sections off of a truck that I tore apart. They have no damage in the tail light area. These were cut off of a stock gm long bed. I can cut these up however you would like. They were cut in the middle of the wheel housing. I have both sides. These also have te holes for 69-72 moulding. Only have picture of one side. $100 each cut to your specs. Pm me with any questions. Thanks!!! Posted via Mobile Device Attached Images Last edited by CheyenneSuper72; 05-19-2013 at 02:34 PM. Reason: Spell check

05-19-2013, 02:08 PM	#2
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Posted via Mobile Device Attached Images

05-19-2013, 02:13 PM	#3
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Posted via Mobile Device Attached Images

05-20-2013, 08:41 AM	#4
PD1292 Registered User Join Date: Mar 2011 Location: San Angelo Texas Posts: 190	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Ill take the grill if its not to far to drive. Where are you in Texas. Pm or just state a mileage from San Angelo. Thanks Barry

05-20-2013, 08:53 AM	#5
Route-66 Registered User Join Date: Apr 2013 Location: Guntersville, AL Posts: 24	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels I will take the right side bedside panel cut right behind the start of the wheel well if you will give me an approximate shipping cost to 35976. I mainly have damage around the tail light section.

05-20-2013, 08:18 PM	#6
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Right side panel sold. Sale pending on grill.... Posted via Mobile Device

05-21-2013, 04:44 AM	#7
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Do you have the driver side? Pics? I ll take it if we can work a deal. Shipping to 35960

05-21-2013, 08:33 AM	#8
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Pm sent Posted via Mobile Device

05-23-2013, 07:11 AM	#9
PD1292 Registered User Join Date: Mar 2011 Location: San Angelo Texas Posts: 190	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels I am out on the grill, too far of a drive for me. thanks anyway. TTT for you.

05-23-2013, 08:11 AM	#10
Evaded Registered User Join Date: Apr 2013 Location: San Antonio TX Posts: 424	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels May be interested in grill depending on your location... Posted via Mobile Device __________________ If I see a Zombie.. Im runnin it over with my Truck.

05-31-2013, 11:17 AM	#11
byk71913 Registered User Join Date: Apr 2013 Location: hot springs arkansas Posts: 1	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels ill take the grille if you will ship?? im in Arkansas! thanks

05-31-2013, 11:39 AM	#12
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 699	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Where in Texas are you located at? I'm interested in grill thanks Posted via Mobile Device

05-31-2013, 12:58 PM	#13
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Do you still have the drivers side bedside? Posted via Mobile Device __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

05-31-2013, 06:00 PM	#14
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Pm sent on the grill. If evaded passes I may ship. Located close to Amarillo tx. Drivers bedside is still available. Thanks Posted via Mobile Device

05-31-2013, 06:42 PM	#15
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 894	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Shipping on LH Bedside patch to 30530.



Register or Log In To remove these advertisements.

05-31-2013, 07:10 PM	#16
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Depending on how much you need shipping will range from $25-45. Get me a measurement and I will let you know. Thanks. Posted via Mobile Device

05-31-2013, 07:59 PM	#17
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels I dont reallly need the taillight area if someone else needed it, I just want to fix this section shown above __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

06-02-2013, 12:15 PM	#18
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels PM sent to 68350, Undone is next on the bedside.....grill is still for sale. Thanks!

06-02-2013, 02:21 PM	#19
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Payment sent Posted via Mobile Device __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

06-02-2013, 02:41 PM	#20
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Bedsides are SOLD!! Grill is still available. Thanks.

06-03-2013, 11:35 PM	#21
mytruck70 Registered User Join Date: Apr 2012 Location: clayton, NC Posts: 139	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels are those bed emblems for sell ?

06-03-2013, 11:40 PM	#22
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Those were pictures of another members truck to show me where to cut the replacement panel. Might pm him. Thanks Posted via Mobile Device

06-05-2013, 02:52 AM	#23
Cohl Registered User Join Date: Apr 2009 Location: Gardnerville, NV Posts: 134	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Is the grill still available? If so, would you ship it to Nevada? Thanks! Posted via Mobile Device

06-05-2013, 06:40 AM	#24
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Pm sent Posted via Mobile Device

06-05-2013, 09:23 AM	#25
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Do you have the lower RH side molding? If so how much shipped to FL 32906?

Register or Log In To remove these advertisements.