IL Parting out a 1969 Chevy c10 with a 67 front clip - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1971ChevyTruck · 06-21-2013, 01:37 PM

I will be posting parts with prices tonight. I am keeping only the trailing arms and brackets, everything else is for sale.

1971ChevyTruck · 06-21-2013, 01:48 PM

Three speed column $50
Emergency Brake handle $25
Engine Heater Box $30
Inside Heater Box $30
Metal Door Panels $20 each
Power Steering Pump $45
Ashtray and lighter $18

1971ChevyTruck · 06-21-2013, 01:49 PM

Arm Rests $30 for the pair
gauge bezel $35

crushing · 06-21-2013, 02:07 PM

how much for the antenna shipped to 72396 (Arkansas)?

1971ChevyTruck · 06-21-2013, 02:13 PM

How about $19 shipped?

camrycurt · 06-21-2013, 02:17 PM

How much for the horn guts shipped to 20176?

Thanks!

starfire58 · 06-21-2013, 03:24 PM

How's the side trim on this truck? Or the doors? Where in IL are you located? I'm in Streator, IL. LMK on these items as I could come and get them.

Dirt's72 · 06-21-2013, 03:40 PM

Do you have 3 speed column linkage?
Thanks
Posted via Mobile Device

1971ChevyTruck · 06-21-2013, 03:45 PM

I have all the linkage, the trim has some good pieces, some have dents

1971ChevyTruck · 06-21-2013, 03:46 PM

The horn guts in the steering wheel?

1971ChevyTruck · 06-21-2013, 03:49 PM

How about $25 shipped for the linkage??

starfire58 · 06-21-2013, 03:55 PM

How's the doors. I'd probably be interested in comming to look at what you have, especially since you're not too far from me. Thanks. Bob

59bones · 06-21-2013, 03:58 PM

I am interested in the following:

Front trim at hood and two fenders, what condition are these in?
2 wiper blades if original stainless steel

I am in Illinois and can pick up or how much with shipping to 60109

Thanks.

1971ChevyTruck · 06-21-2013, 04:00 PM

The fenders have some fiberglass in them, but would sell the pair for $50. What trim are you asking about? The trim on the grill?

1971ChevyTruck · 06-21-2013, 04:01 PM

The passenger side door is in good shape, the drivers has a small dent and a little rust

starfire58 · 06-21-2013, 05:09 PM

Quote:

Originally Posted by 1971ChevyTruck

The passenger side door is in good shape, the drivers has a small dent and a little rust

Could you post pic of doors- inside, bottoms,outside? I'm not sure when I could get there yet. Pm sent.

Dirt's72 · 06-21-2013, 05:37 PM

I'll take the linkage.
Posted via Mobile Device

Dirt's72 · 06-21-2013, 05:48 PM

I'll take the power steering pump if the pullly is on it. Also if you have brackets for power steering. Is the horn cap in good shape?
Posted via Mobile Device

grwnded71 · 06-21-2013, 05:59 PM

How much for the front fender eyebrow moldings if 59bones passes? Consider me next in line ready to buy them now....shipping 53105

**DaHos** · 06-21-2013, 08:41 PM

Interested in the following
Arm rests
Visors
Door mirrors w arms, backing plates and screws.
Steering wheel

Pending photos, price, condition and shipping.

PS: I'm pretty sure you have yourself a 68'

crushing · 06-21-2013, 08:43 PM

If that is base and antenna it sounds good to me. We can make it an even 20. Just let me Know how u prefer to be paid

B][/B]

Quote:

Originally Posted by 1971ChevyTruck

How about $19 shipped?

Posted via Mobile Device

1971ChevyTruck · 06-21-2013, 10:16 PM

Dirt's I'll check on the pulleys in the morning and post pictures of the steering wheel, horn button, arms rests and visors

Hardesty454 · 06-21-2013, 10:35 PM

How much for the grille and rings shipped to 95367. Any issues with these items?
Posted via Mobile Device

Spartan · 06-22-2013, 12:18 AM

Drivers side interior door panel shipped to 97462 pending pics and condition?
Thanks
Posted via Mobile Device

bludeuce · 06-22-2013, 01:26 AM

Are you selling the cab? What's it's condition, looks pretty good from the pics. Don't need the doors/glass/interior, just the cab metal.

06-21-2013, 01:37 PM	#1
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Parting out a 1969 Chevy c10 with a 67 front clip I will be posting parts with prices tonight. I am keeping only the trailing arms and brackets, everything else is for sale. Attached Images

06-21-2013, 01:48 PM	#2
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip Three speed column $50 Emergency Brake handle $25 Engine Heater Box $30 Inside Heater Box $30 Metal Door Panels $20 each Power Steering Pump $45 Ashtray and lighter $18

06-21-2013, 01:49 PM	#3
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip Arm Rests $30 for the pair gauge bezel $35

06-21-2013, 02:07 PM	#4
crushing Registered User Join Date: Nov 2012 Location: Tallahassee, FL Posts: 99	Re: Parting out a 1969 Chevy c10 with a 67 front clip how much for the antenna shipped to 72396 (Arkansas)? __________________ 1972 Cheyenne (Major Project) 1993 Jeep Wrangler 2012 Ford F150 FX2 2012 GMC Yukon

06-21-2013, 02:13 PM	#5
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip How about $19 shipped?

06-21-2013, 02:17 PM	#6
camrycurt Registered User Join Date: Jul 2010 Location: Leesburg, VA Posts: 420	Re: Parting out a 1969 Chevy c10 with a 67 front clip How much for the horn guts shipped to 20176? Thanks! __________________ Curt 1970 C/10, 250 L6 with Rochester BV carb, SM465 4 speed, 3.73 open rear

06-21-2013, 03:24 PM	#7
starfire58 Registered User Join Date: Oct 2012 Location: Streator, Illinois Posts: 123	Re: Parting out a 1969 Chevy c10 with a 67 front clip How's the side trim on this truck? Or the doors? Where in IL are you located? I'm in Streator, IL. LMK on these items as I could come and get them.

06-21-2013, 03:40 PM	#8
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,105	Re: Parting out a 1969 Chevy c10 with a 67 front clip Do you have 3 speed column linkage? Thanks Posted via Mobile Device

06-21-2013, 03:45 PM	#9
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip I have all the linkage, the trim has some good pieces, some have dents

06-21-2013, 03:46 PM	#10
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip The horn guts in the steering wheel?

06-21-2013, 03:49 PM	#11
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip How about $25 shipped for the linkage??

06-21-2013, 03:55 PM	#12
starfire58 Registered User Join Date: Oct 2012 Location: Streator, Illinois Posts: 123	Re: Parting out a 1969 Chevy c10 with a 67 front clip How's the doors. I'd probably be interested in comming to look at what you have, especially since you're not too far from me. Thanks. Bob

06-21-2013, 03:58 PM	#13
59bones Registered User Join Date: Sep 2011 Location: Elgin Illinois Posts: 142	Re: Parting out a 1969 Chevy c10 with a 67 front clip I am interested in the following: Front trim at hood and two fenders, what condition are these in? 2 wiper blades if original stainless steel I am in Illinois and can pick up or how much with shipping to 60109 Thanks.

06-21-2013, 04:00 PM	#14
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip The fenders have some fiberglass in them, but would sell the pair for $50. What trim are you asking about? The trim on the grill?

06-21-2013, 04:01 PM	#15
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip The passenger side door is in good shape, the drivers has a small dent and a little rust



Register or Log In To remove these advertisements.

06-21-2013, 05:37 PM	#17
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,105	Re: Parting out a 1969 Chevy c10 with a 67 front clip I'll take the linkage. Posted via Mobile Device

06-21-2013, 05:48 PM	#18
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,105	Re: Parting out a 1969 Chevy c10 with a 67 front clip I'll take the power steering pump if the pullly is on it. Also if you have brackets for power steering. Is the horn cap in good shape? Posted via Mobile Device

06-21-2013, 05:59 PM	#19
grwnded71 Registered User Join Date: Jul 2010 Location: Cedar Falls,IA Posts: 301	Re: Parting out a 1969 Chevy c10 with a 67 front clip How much for the front fender eyebrow moldings if 59bones passes? Consider me next in line ready to buy them now....shipping 53105 __________________ BRETT 70 C10 SWB,ECE 4.5/6 drop 68 C10 LWB Survivor DD 06 Harley-Davidson FLHT 71 Cheyenne Super LWB/sold

06-21-2013, 08:41 PM	#20
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: Parting out a 1969 Chevy c10 with a 67 front clip Interested in the following Arm rests Visors Door mirrors w arms, backing plates and screws. Steering wheel Pending photos, price, condition and shipping. PS: I'm pretty sure you have yourself a 68' __________________ 1967 C10 SWB Owner - Rustbelt Restorations

06-21-2013, 10:16 PM	#22
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip Dirt's I'll check on the pulleys in the morning and post pictures of the steering wheel, horn button, arms rests and visors

06-21-2013, 10:35 PM	#23
Hardesty454 Registered User Join Date: Feb 2011 Location: Riverbank, Ca Posts: 1,006	Re: Parting out a 1969 Chevy c10 with a 67 front clip How much for the grille and rings shipped to 95367. Any issues with these items? Posted via Mobile Device __________________ Rob 1971 c10 - ground up in progress Tripp's Speed Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=589750

06-22-2013, 12:18 AM	#24
Spartan Registered User Join Date: Dec 2012 Location: Backwoods, OR Posts: 888	Re: Parting out a 1969 Chevy c10 with a 67 front clip Drivers side interior door panel shipped to 97462 pending pics and condition? Thanks Posted via Mobile Device __________________ '69 K20 350/4 speed/Rockwell/D44/HO52. "orange rhymes with door hinge"

06-22-2013, 01:26 AM	#25
bludeuce Registered User Join Date: Jun 2013 Location: Park City, KS Posts: 4	Re: Parting out a 1969 Chevy c10 with a 67 front clip Are you selling the cab? What's it's condition, looks pretty good from the pics. Don't need the doors/glass/interior, just the cab metal.

Register or Log In To remove these advertisements.